This thread is awesome! My 19b is going to be here tomorrow and i was wondering where i could get a spare 19a head to do this with and does it work just as well with a 19b head?
Make your own SG - 1 hybrid type kit the SG-FREE
- Thread starter mrcrunch08
- Start date
- th_trl_thread_readers 0
- Status
Just by looking at the 19b "Nzonic"clone head I don't think it will work. The 19a heads have a large recess around the center post which allows it to be cut very easily. If you have the 19b head then this is really a non-issue right?
I just got my 19 in with both heads. The nzonic head wont be able to be cut down. It is solid and mine is all messed up. The threads don't screw onto the base correctly and it ends up not sitting flush with the mod and off to the side by a little bit. The normal cap on the other hand fits perfect. I think ill be ordering some more of the original heads and maybe one more nzonic if the replacement fits correctly. The nimbus clone looks and works great with the 19a head!
You're saying that the nzonic head you ordered doesn't fit on your brand new 19??
Hes saying the Nzonic head is a no go for modding it to make his own sg-1 modification. U need the original cap with the joose well to be able to make the modification work
yeah, my Nzonic cap doesn't fit on the mech well at all. It sits off to the side a good .25-.5 mm on it. I ordered another nzonic head hoping it'll fit better than the last one and 2 more original heads for spares/modding.
Where did you order the original heads from? I haven't seen those for sale anywhere.
exhalevapors has them. I believe they are the only ones who have them.
$5 for a potential hybrid kit vs. 25 for the SG-1.....
$5 for a potential hybrid kit vs. 25 for the SG-1.....
Last edited:
Thanks mrcrunch08! now if I could just get this darn button a part my #19 would be perfect
Thanks mrcrunch08! now if I could just get this darn button a part my #19 would be perfect
Ha nice.. How u like genny joose? I got buckys other one also.. I gave my buddy genny joose because im not into menthol. My buddy loves it. I like his bancoco ah forgot what its called
I DIY all my juice and it's nothing like anything I make I like it for a change of pace but I usually don't vape menthol ether
kabonk, I still can't figure out what you did there to sink that RSST down so far. The only way I see that being possible is to remove the lower cap of the RSST itself and replace it with the new hybrid threads ... unless I'm wrong.
I can't see any other way either ... that has to be what was done.
Thanks for this!! I had looked there in the past and they only had the Nzonic cap available.
no I just took a dremel to the sides of the bottom cap and shaved them off the bottom deck is still intact and doing this pretty much destroys the atty for use with any other mod unless you are using a sg-1 or sg-free, I did the same with the EA clone. somebody else posted a ea or #19 (don't remember which or who) with it done and I thought wow that's a good idea and broke out the dremel
Last edited:
I'm really glad this has sparked some interest. That is a great idea for the rsst. Now that they are cheap I'm going to have to get another to do that.
no I just took a dremel to the sides of the bottom cap and shaved them off the bottom deck is still intact and doing this pretty much destroys the atty for use with any other mod unless you are using a sg-1 or sg-free, I did the same with the EA clone. somebody else posted a ea or #19 (don't remember which or who) with it done and I thought wow that's a good idea and broke out the dremel
any chance you can take a pic of what you did to the bottom of the RSST?
- Status
Similar threads
