MAP Tank Mod

[throbinskin]

So I'll need an adapter? I was hoping to avoid it.

I'm sorry...... But I don't know what you are trying to connect the MapTank to. The MapTank has a 510 already on it, so if your batteries use a 510 then no adapter needed but if you are using a mod then someone else will have to help you.. The Map went right on to my eGo with no adapter if that helps you.

 

[VpnDrgn]

So I'll need an adapter? I was hoping to avoid it.

The 510 to 510 adapter is only needed to get the tank above a top button PV. If I remember right the Buzz's button is on the side so you should be fine with out an adapter.

 

[evilferret]

Thanks all now to waiting for it come into stock!

 

[04 Raider Rider]

The 510 to 510 adapter is only needed to get the tank above a top button PV. If I remember right the Buzz's button is on the side so you should be fine with out an adapter.

Need it on a Chuck or I would think anything with a recessed juice well.

 

[evilferret]

Need it on a Chuck or I would think anything with a recessed juice well.

How recessed? I'm hoping somebody with a Buzz could chime in.

 

[GinnieM]

How recessed? I'm hoping somebody with a Buzz could chime in.

EF,
I use a 510 MAP Tank on a 510 Buzz without adapter.
HTH

 

[stubear62]

I use the 510 to 510 adptr on my eGo. This way I can use the cone for looks.

 

[cuseguy]

Stu don't need no stinkin Ego-T!

 

[throbinskin]

@ stubear.... I did not think of that... I bought a 510-510 off bruce... and temporarily using the Map on my eGo without the cone. LOL.. I like the looks of it better with the cone than before.... What ohms are you using with the eGo Bat... I started with a 2.8.... and switched to the 3.2 last night... I think I like the 3.2 better... I'm vapeing 555 60/40 and The juice taste better on the 3.2 ohms!!! LOVE MY MAP

 

[DreadLioness]

I finally received my tank and I'm so happy with it. I didn't need to use a needle or anything just popped the top and poured in my juice. I also flipped the rubber piece like I do with my xl clear mod. Nothing but vape heaven! I plan to use my tank for my favorite all day vape (coconut pie) All I need now is a few clear mini mods that hold about a ml of juice (to sample new juices) and I'm set. I couldn't imagine going back to regular cartos or atties.

Here's a pic of my tank on my saber touch with a gooseneck

 

[evilferret]

I finally received my tank and I'm so happy with it. I didn't need to use a needle or anything just popped the top and poured in my juice. I also flipped the rubber piece like I do with my xl clear mod. Nothing but vape heaven! I plan to use my tank for my favorite all day vape (coconut pie) All I need now is a few clear mini mods that hold about a ml of juice (to sample new juices) and I'm set. I couldn't imagine going back to regular cartos or atties.

Here's a pic of my tank on my saber touch with a gooseneck

Nice setup!

 

[VpnDrgn]

I use the 510 to 510 adptr on my eGo. This way I can use the cone for looks.

I got my adapter from COV and tried that too, but my cone is about a 1/4 to 3/8" to big.

 

[evilferret]

Any update on available for this week? I want to order a eGO-T setup for the missus but was hoping to get a tank at the same time.

And the eGO-T's are out too.

Blah.

 

[Bigbuyer]

Lots of MAP Tanks this week!
Sorry all the eGo-T's are sold out!

 

[stubear62]

@ throbinskin
I am currently using the 2.8 Ohm.
I have the 3.2 and 2.4 but do like the 2.8 best.
But as b4, I still have that damn leaking problem with this and I need to be careful of the tilting. (liquid leaks down te center post of the CE-2, inside of it from ceramic cup).

@ cuseguy
I still have the eGo Tanks that I will use when I go out. The Tank might be a little weird to have when out and about...

 

[stubear62]

I got my adapter from COV and tried that too, but my cone is about a 1/4 to 3/8" to big.

Are you sure the adapter you have is like this???

 

[VpnDrgn]

Are you sure the adapter you have is like this???

I don't have it with me right now, but is all steel ( no brass on the ends ) and only about 3/4" long.

 

[AmyB66]

I am stalking the cov store! Stu, you got me worried about the leaking business, I am hoping they are improving this. I want one of these so when I am at work I can just grab it and hit it without having to worry about topping of etc. I use cartos but am always topping off, since I chain vape, it is often because I can get long carto life if I constantly top off and at high voltage, letting them even start to get dry is a no no.

I put a pack of clearomizers in my cart too, I should have grabbed those on my last order so I could get a feel for the whole thing.

 

[cuseguy]

Have you guys seen the modders connection on Avid Vapers. It is the smallest 510 to 510. About .25" it is ideal for most MAP connections.

 

[Repent]

I got my MAP tank in a few days ago and had a big issue with it dripping/leaking from the center tube. I "think" I may have had the CE2 pushed in too far or something. Seems that when I looked into the tank I couldn't see the silicon cap that goes over the bowl because it was too far up into the top Delrin cap. Seems like the juice could then leak from the bowl/wicks into the center tube and from there drip out. I thought at first I could clear the problem by blowing through the center tube. I did that and some juice came out but a few seconds later it started it's drip, drip, drip routine.

I removed the juice, rinsed everything out with hot water, dried and reassembled it. I did notice that when I put it back together and snapped the CE2 into the bottom Delrin cap that the top cap that covers the bowl/wicks was now only about halfway up into the top Delrin cap. I plan to test my theory by using just plain water this time. Don't want to waste the juice if this thing is just going to leak all over the place because I'm doing something wrong.

Does what I describe about the leak sound right? Has anyone had this issue and traced it down to the fact that the CE2 is pushed too far up into the top cap and because of that, saw leaking through the center tube?

I'm fairly certain the issue is mine since the device itself shows no sign of obvious damage and others have no issues with leaking.