Map Tank question
- Thread starter daniel5383
- Start date
- th_trl_thread_readers 0
- Status
essentially its a difference in capacity. the storm comes in 1.5 and 4ml, and the map is 5ml.
oh ok...so is the storm one clouds of vapor's own or is it also made by the guy that made the map tank?
The MAP Tank is made by MAP, the Stormy, by my Associate Stormy.
The MAP is made of delryn and is machined on a lathe.
Stormy's is a modified syringe mod. It is priced at half or less of the MAP Tank.
The MAP is made of delryn and is machined on a lathe.
Stormy's is a modified syringe mod. It is priced at half or less of the MAP Tank.
Do either of them leak !!! or do they do the same thing minus the amount of fluid?
No leaking...
They do the same thing. The construction of the tank and the amount of juice they hold are the differences.
They do the same thing. The construction of the tank and the amount of juice they hold are the differences.
And they are a whole different experience from the E2 thin tubes. They wick exceptionally well, even thicker juices, and put out vast amounts of plumes of vapor. Out of the best of my special mods and all the syringe/tube type atty mods the taste retention of your juice is the ultimate I've experienced.
Also, and I don't know why..... I use LR 1.5-2.0 attys on my bottom fed mods, 510 and 306 to get the satisfaction I want at 3.7 volts. The 2.4 ohm Storm is fantastic at 3.7 volts and I'm used to 1.5 to 2.0 ohm vaping. So I would suggest going a little higher in ohms for the tanks than you are used to using at the voltage you normally vape using other attys/cartos.
I'm am totally impressed with the tanks!!!!
Alice
Also, and I don't know why..... I use LR 1.5-2.0 attys on my bottom fed mods, 510 and 306 to get the satisfaction I want at 3.7 volts. The 2.4 ohm Storm is fantastic at 3.7 volts and I'm used to 1.5 to 2.0 ohm vaping. So I would suggest going a little higher in ohms for the tanks than you are used to using at the voltage you normally vape using other attys/cartos.
I'm am totally impressed with the tanks!!!!
Alice
BTW... beyond the control of Bruce or me I have had two broken MAP tanks; one cracked in shipment, which Bruce promptly replaced, and tonight my puppies stole my MAP tank and crunched it up.
But I've been using Stormy mods for at least two months, the E2 XL mod and the Storm Tank, tall. None of them have ever leaked. Tonight one of my factory Clearomizers leaked some from the bottom. Just any FYI and the bigger tanks keep the wicks really wet. I've never gotten any dry hits from the Storm tank and I chain vape.
Alice, just a satisfied customer and one of many, many, many, that Bruce takes good care of.
But I've been using Stormy mods for at least two months, the E2 XL mod and the Storm Tank, tall. None of them have ever leaked. Tonight one of my factory Clearomizers leaked some from the bottom. Just any FYI and the bigger tanks keep the wicks really wet. I've never gotten any dry hits from the Storm tank and I chain vape.
Alice, just a satisfied customer and one of many, many, many, that Bruce takes good care of.
thanks for the info...i guess ill order the stormy ones since the map tank is never in stock and its double the price for the same thing...going to place my order now 
my sister just got some storm clear tanks in the mail, and she wanted to know if she was doing something wrong because hers leaks easily...she doesnt understand it..maybe she is missing a piece or something?
i guess the better question i was getting at was can you turn this thing upside down with juice in it and it not leak as demonstrated in this video?
YouTube - Map Tank CE2 mod
YouTube - Map Tank CE2 mod
Im the sister, and it only leaks when tipped, say upside down, which could easily* happen in my purse. Also the rubber stopper is as far from secure as it could possibly be. I am 100% sure I have not over filled. I am sure I have put it together properly as stated by the COV site. The slightest bump and the rubber stopper just slides off, so even if it didnt leak when upside down it wouldnt matter because the stopper would just slide off when it touched ANYTHING. It vapes like a dream other wise.
Leaking when its on its side or upside down. Maybe I was wrong in thinking it wasnt supposed to?
When you say rubber stopper are you talking the rubber Oring over top of the ceramic cart or the actual Delrin end cap ?
Mine came in 3 pieces..the tank, the tiny tip, and the piece I'm calling the rubber tip ( O ) shaped. My juice just pours out the end when its in any postion other than compltley vertical. When I say the end I mean the actual tip you'd put in your mouth.
OK, take an old Ego, or something with a 510 female connection on it, screw it on the end of your maptank batt end, thread on your maptank to this female 510 OLD Batt or whatever you have, then carefully turn and push upwards so your rubber oring goes into the top end a bit more, this will seal you up better, you could also take the smaller oring that regular E2's come with and put that overtop of the one that covers you ceramic cup too then put you metal sleeve back in then you drip tip, the first part I mention should help ya out a lot, and if you ad that second ring on top of what I said you should be like gold, these are not 100% seal proof but pretty darn close if you have it set up correctly, mine done leak at all
Hoe that helps out GreaymatterGirl
MWA may I pm you?..Im somewhat new to vaping and I dont know if I understand the instructions well enough. Thank you so much for your help!
- Status
Similar threads
