max wattage for coils

[Smudge77]

hi not sure if this is the correct spot for this post..

ok im wanting to get into building my own coils,well use pre built coils atm anyway, i just brought a coil selection box and a Grimm green rda, i just want to know what is the max wattage i can use on each of these coils

coil selection box = ClaptonWire 8 in 1 Pre Built Ready Made Wire Coils Clapton Hive Alien Quad

4x - Mix twisted coil - 0.45ohm ?

4x - Hive coils - 0.5ohm ?

4x - Tiger coils - 0.36ohm ?

4x - Clapton coils - 0.85ohm ?

4x - Quad coils - 0.36ohm ?

4x - Fused clapton coils - 0.45ohm ?

4x - Alien clapton coils - 0.45ohm ?

4x - Flat Twisted coils - 0.36ohm ?

the batteries im useing are 2 x 25R ON THE SMOK ALIEN 220

im trying to learn about ohmes law and all that, but some info just dont stick into the grey matter if you know what i mean, if anyone could be so kind and just copy paste the coils list with the max wattage i can use, thanks

 

[PopsVaper]

Welcome to ECF.
One of the best places for that information is Steam Engine | free vaping calculators I go there to check on coils and how they will preform and what Ohms are safe for the any battery I am thinking of buying. Its a great tool and the more I know the more I use it to stay safe.

Vape On

 

[Izan]

hi not sure if this is the correct spot for this post..

ok im wanting to get into building my own coils,well use pre built coils atm anyway, i just brought a coil selection box and a Grimm green RDA, i just want to know what is the max wattage i can use on each of these coils

coil selection box = ClaptonWire 8 in 1 Pre Built Ready Made Wire Coils Clapton Hive Alien Quad

4x - Mix twisted coil - 0.45ohm ?

4x - Hive coils - 0.5ohm ?

4x - Tiger coils - 0.36ohm ?

4x - Clapton coils - 0.85ohm ?

4x - Quad coils - 0.36ohm ?

4x - Fused clapton coils - 0.45ohm ?

4x - Alien clapton coils - 0.45ohm ?

4x - Flat Twisted coils - 0.36ohm ?

the batteries im useing are 2 x 25R ON THE SMOK ALIEN 220

im trying to learn about ohmes law and all that, but some info just dont stick into the grey matter if you know what i mean, if anyone could be so kind and just copy paste the coils list with the max wattage i can use, thanks

They should all be fine at 120Watts or less (what your device will safely output).
Do you build single or dual coil?

Cheers
I

 

[Smudge77]

They should all be fine at 120Watts or less (what your device will safely output).
Do you build single or dual coil?

Cheers
I

i havnt yet received the coils atm, today fingers crossed, i suppose single to start off with, then try dual

 

[Smudge77]

i havnt yet received the coils atm, today fingers crossed, i suppose single to start off with, then try dual

i want to go for taste rather than plumes

 

[sonicbomb]

On a regulated device (I'm assuming that's what you are using) how much power you put into the coil depends on the mass of the coil (big coils need proportionally more power), how well you have set up the wicking and airflow, and of course how hot a vape you like.
Start at a low power level and increase until vape nirvana is achieved, or you get a burnt hit.
Flavor is affected by many factors but in my experience it is usually inherent in the design of the atomizer.

You may find these articles useful

https://www.e-cigarette-forum.com/forum/blog-entry/ohms-law-calculating-safe-amp-usage.7562/unread

https://www.e-cigarette-forum.com/f...between-power-and-coil-resistance.7753/unread

 

[Smudge77]

ok i got my coils, i have a single clapton in, reading 0.88ohms i currently have it on 60watts and the readings are
ohms=0.871
volts =6.410
amps=7.359
average 4s drag
that look ok ? taste is fine to me atm

 

[Skold]

ok i got my coils, i have a single clapton in, reading 0.88ohms i currently have it on 60watts and the readings are
ohms=0.871
volts =6.410
amps=7.359
average 4s drag
that look ok ? taste is fine to me atm

You will be fine up to 120 watts & it is a regulated mod so I wouldn't worry so much. 25rs are good batteries too!
Ohms law is more important when using a mech really, but use an ohm meter when building just to make sure your at your desired resistance

 

[suprtrkr]

That will do nicely, I think. Welcome to the board.

 

[BrotherBob]

ok im wanting to get into building my own coils,well use pre built coils atm anyway, i just brought a coil selection box and a Grimm green RDA, i just want to know what is the max wattage i can use on each of these coils

Welcome and glad you joined.
Whats right for you may not be right for another.
I find that the wattage that works for me is usually a few watts over the lowest watt setting (where i can barely see the vape cloud on the exhale). Lower watt settings lessen the chance of burning the liquid and generates the best flavor.
After I get my Atty (coil and chamber heat up) going for awhile, I will often times turn the mod down or up to see if I can taste more flavor. I'm often surprised at how much better tasting the vape can be by adjusting the vape temp/wattage.
Might like to read:
Wattage vs. Flavor | E-Cigarette Forum