Mech mail

Status
Not open for further replies.

cstone1991

Senior Member
ECF Veteran
Sep 7, 2014
102
76
Idaho
I know we all get excited when we order some new gear. Here is a thread to share your excitement with everyone else! It's simple, just post here to let us know what goodies you have headed your way. Mech mods and accessories are preferred, but any APV is acceptable. Pics when you receive your gear are always appreciated!

Any animosity towards either clones or authentics or the people who buy either, will not be tolerated. This thread is not a place for that discussion!

I'll start us off. Today, I ordered a copper 4Nine clone with a black Rogue clone with all 3 AFC rings (stainless, copper, and brass). It was a hard decision between the SMPL and the 4Nine, but the 4Nine won due to having a larger discount today. If I like the "hybrid" style, I may still pick up a SMPL before long.
 

Fattlestar

Ultra Member
ECF Veteran
Verified Member
Oct 10, 2014
1,254
1,019
Ohio, USA
I thought about grabbing one of those deep discount 4nine's, but I'm not a fan of hybrids (don't trust myself or my atty's 510s enough, maybe someday). If I do dive into the hybrids, I'll probably shoot for both a SMPL and a 4nine, but first I think I'd go for a cigreen Excalibur just to own an authentic (even if it's a cheapy authentic).

For my mech mail, I have an SXK Copper Stingray LE, and SXK Stillare V2 to top it in the mail. Got held up in City of Industry so, it should have been here two days ago but is now scheduled for Tuesday. Fingers crossed.
 

Light Seeker

Ultra Member
ECF Veteran
Verified Member
Jan 31, 2013
1,052
1,322
Houston TX
Today, I ordered a copper 4Nine clone

Got 1 of those deeply discounted 4nines a month ago in stainless.... I absolutely love mine, I'm sure you will too! Best $13 ever spent on a mod!

Couple things found out after a month of use... Keep the sides of the button shiney clean and untarnished for a nice smooth and easy fire. Also, don't tighten your atomizer too tight, or don't tighten the top cap too tight in the tube - requires putting 2 screwdrivers in the holes to use as leverage to remove, a real pain.

Hope u enjoy yours as much as I enjoy mine!
 

Highwayman1224

Ultra Member
ECF Veteran
Verified Member
Apr 9, 2012
1,961
5,015
59
Goodyear, AZ
I received my gp paps v3 & Heron Friday, my most beautiful and treasured combination I have at the moment.
 

Attachments

  • 20150206_215152.jpg
    20150206_215152.jpg
    17.6 KB · Views: 43
  • 20150206_180418.jpg
    20150206_180418.jpg
    19.3 KB · Views: 44

k5blazer

Super Member
ECF Veteran
Verified Member
Oct 1, 2010
787
611
Fredericksburg, VA
Wish you started this thread 3 months ago when I was getting new gear in lol. Nothing in the mail at this time, but in the last few months, a SRX clone, Viggo with matching vape jam atty, SMPL clone, and my most recent as of a week or so ago, a PaPs clone with a Rogue atty, along with a few different DT's.
 

cstone1991

Senior Member
ECF Veteran
Sep 7, 2014
102
76
Idaho
Got 1 of those deeply discounted 4nines a month ago in stainless.... I absolutely love mine, I'm sure you will too! Best $13 ever spent on a mod!

Couple things found out after a month of use... Keep the sides of the button shiney clean and untarnished for a nice smooth and easy fire. Also, don't tighten your atomizer too tight, or don't tighten the top cap too tight in the tube - requires putting 2 screwdrivers in the holes to use as leverage to remove, a real pain.

Hope u enjoy yours as much as I enjoy mine!
Thanks for the tips! I'll keep that in mind.

Wish you started this thread 3 months ago when I was getting new gear in lol. Nothing in the mail at this time, but in the last few months, a SRX clone, Viggo with matching vape jam atty, SMPL clone, and my most recent as of a week or so ago, a PaPs clone with a Rogue atty, along with a few different DT's.

Nice! How do you like the Rogue?
 

k5blazer

Super Member
ECF Veteran
Verified Member
Oct 1, 2010
787
611
Fredericksburg, VA
Nice! How do you like the Rogue?

I like it a lot. I keep the coils high, close to the top cap, and make sure it has a decent air path under the coils. Great flavor and respectable vapor production. My one gripe, the O-rings are tight, makes it difficult to remove top cap. It's a tobecco clone...
 

RamShot Rowdy

Battery Police
ECF Veteran
Verified Member
Nov 6, 2009
834
507
Oklahoma, USA
I'm fighting myself every day not to order a SuperT. I just got an Mvp 20 watt and a new tank
I've also spent quite a bit on juice lately. I'm no into mechs or rebuilding yet. I may just have to order a workhorse and let it sit until I can afford(justify) buying a proper atomizer and batteries and charger.

For $60 the Workhorse is to good to pass up. The quality of Super T mods is just unreal.
 

K_Tech

Slightly mad but harmless
ECF Veteran
Verified Member
Sep 11, 2013
4,208
5,109
Eastern Ohio, USA
I have a Super T ELA V2 headed my way in the mail right now. Also have a Telescopic Workhorse and Strata ordered that haven't shipped yet.

For $60 the Workhorse is to good to pass up. The quality of Super T mods is just unreal.

I couldn't pass up on the deal either & ordered the Telescopic WorkHorse last week. It's going to be a long wait.... Lol

I just picked up my ELA and Workhorse telescopic at the post office on the way in to work today. Although it's still going to be several hours before I get to vape with either of them, the machining and fit & finish really are stellar.
 

Highwayman1224

Ultra Member
ECF Veteran
Verified Member
Apr 9, 2012
1,961
5,015
59
Goodyear, AZ
I just picked up my ELA and Workhorse telescopic at the post office on the way in to work today. Although it's still going to be several hours before I get to vape with either of them, the machining and fit & finish really are stellar.
Make sure you post back after you play with them and let me know how they perform.
 

HecticEnergy

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2014
2,417
1,638
TX, USA
I have infinite 4nine clone and copper SMPL from AngelCigs.com... SMPL has a .2ohm fused Clapton coil and gets a bit warm after 16 drops (6 hits). I like it except to change the battery you need a coin or large standard screwdriver.
My 4nine stays in 18650 with a kayfun light v2 infinite clone with the short glass tank on it. It's my stealth mod. I don't trust the magnets when going super low (below .5 or so). I Nolax the button and threaded sections and they are buttery smooth. Clean up and reapply every few weeks to every month depending on use.


Sent from my iPhone 6 using Tapatalk
 

HecticEnergy

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2014
2,417
1,638
TX, USA
I made a big purchase from fasttech a few weeks ago... Off the top of my head:
Derringer
areik
Kennedy
Marquis
And some odds and ends like battery cases, coil master (I've been wrapping on a drill bit for over a year, seemed kind of cool, and was dirt cheap, seems like it could be interesting) and such
Also ordered some more bottles for my reo, contacts for my Reo, flat top battery adapter, battery wraps, vape box (art case from Amazon), and a ton of diy stuff...


Sent from my iPhone 6 using Tapatalk
 

HecticEnergy

Ultra Member
ECF Veteran
Verified Member
Jan 24, 2014
2,417
1,638
TX, USA
As soon as it gets back in stock I'm ordering and Odin from Loki labs, and an authentic cyclone... My next mech mods are authentics: flagship and ragnarok... Probably get another Reo first though... It's my adv and swapping mods is easier than swapping bottles (which I have to do atleast once a day)


Sent from my iPhone 6 using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread