mod models advice vets help plz!!!
- Thread starter dabgob
- Start date
- th_trl_thread_readers 0
- Status
After reading more posts I see what you mean... an eGo battery is good for vaping but you want a bit more density to your vape. iTaste makes a couple of nice units ( SVD for example) and when looking at tanks, the RSST or Kayfun clones do well in vapor production. But to get the increased vapor density, you will need to learn how to make coils and wick assemblies. The VV/VW mod will give you a bit more safety factor than a mechanical, and with mechs at subohm range coils, you will need about 6 batteries for the day. Im running a Vamo3 with an RSST and can do pretty dense vapor but it does go thru the juice a whole lot faster ( about 3X faster) so I keep mine down a tad to conserve on juice ( btw Im at 30 nic therefore i need less hits to be satisfied nic wise)
I use 1100 ego-t,u or twist batteries and evod tanks, I have spent a small fortune on Mods and tanks and I still go back to these .It may sound silly but I vape 2 at once .also I mix my own juice 50/50 nicotine juice ,with 20% flavor and 100% VG. I get large vapor plumes . as far as burning coils..prime your wicks then dry hit on your tank .sometimes I let mine sit for a couple of hours in tank filed with juice . also if you want more feeling of vape try menthol flavors ..peppermint,creme de menthe etc.. I have also found some juice ingredients will burn up on a coil quicker .I set some of my coils in boiled water to get old residue off coils, if their not burnt all the way they work just like new ,but be sure to let them dry completely.
Last edited:
I like a good vapor but flavor is what i really want ... !! I want that flavor to saturate my senses ! 
Last edited:
boiling coils if not burnt works well .gets the gunk off.the more batteries the better. I use egos 1100's. cleaning your tanks ,coils and getting rid of thin burnt juice helps .I do this in the morning . then I get a good vape all day.
sometimes bigger is not better!
sometimes bigger is not better!
also wipe the top of your battery out it may have oil on it .also you can usually buy replacement coils if you have burnt your up completely.i still like the evods best.
Why not try a Joyeteck eVic? You can use their personal variable wattage settings, crank the wattage on the very start of the button push to get it heated up quickly, then dial it down through the progression so it is cooler and does not taste burned.
It will record the length of your typical drag, so you can build your graph according to that.
Let's say you have a 2 second typical drag. Set it to 7 watts for the first .5 seconds, and 5.5 watts for the next 1.5 seconds. That should heat up the coil quickly but not leave it tasting burned.
As for big clouds, I don't see it on a lot of my tanks. The biggest, tasty clouds from a "tank" seems to be from my ECA atomizer with my eVic. However, I find my Kanger PT3 has the biggest throat hit.
Also, the nicotine uptake from vaping is different from a cig. Where tobacco is washed with chemicals to promote a quicker uptake in the lungs, liquids are not. Vapor absorption of nicotine into your system occurs better in the mouth and nose than the lungs, so holding the vapor in your mouth for a second or 2 before inhaling and breathing out of your nose will promote better absorption of the nicotine. I read a tutorial deal somewhere where this was explained. Tobacco uptake takes less than 8 seconds, while vaping takes over 30 seconds, so it may take a little longer for this uptake.
It will record the length of your typical drag, so you can build your graph according to that.
Let's say you have a 2 second typical drag. Set it to 7 watts for the first .5 seconds, and 5.5 watts for the next 1.5 seconds. That should heat up the coil quickly but not leave it tasting burned.
As for big clouds, I don't see it on a lot of my tanks. The biggest, tasty clouds from a "tank" seems to be from my ECA atomizer with my eVic. However, I find my Kanger PT3 has the biggest throat hit.
Also, the nicotine uptake from vaping is different from a cig. Where tobacco is washed with chemicals to promote a quicker uptake in the lungs, liquids are not. Vapor absorption of nicotine into your system occurs better in the mouth and nose than the lungs, so holding the vapor in your mouth for a second or 2 before inhaling and breathing out of your nose will promote better absorption of the nicotine. I read a tutorial deal somewhere where this was explained. Tobacco uptake takes less than 8 seconds, while vaping takes over 30 seconds, so it may take a little longer for this uptake.
Last edited:
Let the Nay sayers Nay
You can get what you want pretty cheap, in a mod that won't break the bank.
here are some links of what you can get for a very good product. You also will only need one 18650 battery.
Here:
$24.00 Astro Telescopic Mechanical Mod - stainless steel+brass at FastTech - Worldwide Free Shipping
Here:
https://c2cvaping.3dcartstores.com/1-The-Chi-Triot-_p_320.html
And here:
SONY US18650VTC3 HIGH DRAIN 30A RECHARGEABLE Li-on 18650 Battery 1600m
If you can build your own coils, you can make whatever ohms you want to suit your needs.
After some experimentation, I have found that a micro coil @ higher, safer ohms (.7-.8 ohms)can produce similar clouds to those that are in the extreme category(.3-.4 ohms).
I have several pics of some recent builds myself and others have posted here.
http://www.e-cigarette-forum.com/fo...st-pictures-your-working-wick-coil-setup.html
They are really not that hard to do and if you don't mind dripping will give you everything you need as far as vapor production, throat hit, durable setup.
Last edited:
thank you guys..I called and my clearomizer is at 2.8 ohms and currently it's set at 4v. my wick looks nothing like your guyss. can I upload pics? it has a very short wick (centimeter long) going thru my...wick holder sideways whereas I see your wicks coming from the top I will look into rebuilds.
i use the 1.8 ohm coils at a regulated 3.5 or 3.7 volts with %80 VG e-liquid and the air holes drilled out to 2 MM
but hey do what you want
ProTank Coil Heads
but hey do what you want
ProTank Coil Heads
Last edited:
No Ocelot, you and the other ECF vets were not the ones with manner issues.....
Vapor cloud chasing has and is a bane to our neighborhood.
The itaste v3 @ 8 watts, with a 1.8 ohm coil, cotton wick, with a 40/60 pg/vg mix
looks like a commercial fog machine.......does not enhance the vape experience,
but with all the input from you guys (and listening to the input)
I know I can do it, and do it safely......
Vapor cloud chasing has and is a bane to our neighborhood.
The itaste v3 @ 8 watts, with a 1.8 ohm coil, cotton wick, with a 40/60 pg/vg mix
looks like a commercial fog machine.......does not enhance the vape experience,
but with all the input from you guys (and listening to the input)
I know I can do it, and do it safely......
From the first few pages...it sounds like OP is not satisfied with the vapor production with his current regulated device because he was comparing it to others at a shop and his friends' (that obviously has a stacked mechanical device - which we all know is a no no for being safe). Those at the shop were probably on mechanicals with rba/rdas.
Every reply from members were legit and sounded well, but was not answering the ops question directly. Most of the replies 'nannied' the real answer he wanted to read. RBA, RDA, and genesis, whatever else is what the OP wanted to read and be guided on.
Every reply from members were legit and sounded well, but was not answering the ops question directly. Most of the replies 'nannied' the real answer he wanted to read. RBA, RDA, and genesis, whatever else is what the OP wanted to read and be guided on.
When a newbie shows up saying he wants "that" and HappyDave tells him what must be done/modified with what he already has to get there, and the OP comes back and tell us he knows that won't help - because he's new to this and knows what will and won't help already - yeah, the guy is gonna meet some resistance.
Last edited:
drilling out the holes would not have helped me at all. in fact I cover one of the airflow holes to get the hit I need.. he said voltage doesn't affect the amount of vapor I get so I want a clearomizer with lower ohms correct? I'm at 2.8 now...what should I be at.. I'm looking at the I taste but don't like the box mod... however the pen style is weaker... will he pen style still do the job and at what ohms? any other suggestions with wattage voltage and ohm? mods?
Pen style is weaker?!?!
he said voltage doesn't affect the amount of vapor??!?!?
you obviously understand very little about the relationship between Volts Amps Ohms and Watts.
where on earth do you get these ideas?!
heres the thing. i think your on holiday vacation and bored and looking for a forum to troll.. you never seem to retain anything that is said here. with the absolute wealth of information on this forum you should be able form some ideas for your self. you asked for more vapor, and we explained how you could achieve this with stuff you already have. you tried to argue with us, telling us that the things we suggested would not help... you say you want CLOUDS? well stop taking and start listening to what everyone is trying to say.. i have EVOD tanks and VV batteries. i can replicate exactly what your using and have improved on the design over the years. i happen to use it everyday as my travel setup. and it vapes like a champ...
enough time as been wasted on this....
he said voltage doesn't affect the amount of vapor??!?!?
you obviously understand very little about the relationship between Volts Amps Ohms and Watts.
where on earth do you get these ideas?!
heres the thing. i think your on holiday vacation and bored and looking for a forum to troll.. you never seem to retain anything that is said here. with the absolute wealth of information on this forum you should be able form some ideas for your self. you asked for more vapor, and we explained how you could achieve this with stuff you already have. you tried to argue with us, telling us that the things we suggested would not help... you say you want CLOUDS? well stop taking and start listening to what everyone is trying to say.. i have EVOD tanks and VV batteries. i can replicate exactly what your using and have improved on the design over the years. i happen to use it everyday as my travel setup. and it vapes like a champ...
enough time as been wasted on this....
Last edited:
And this just solidified my reasoning that clouds aren't going to help you! Yes, go with a 1.8-1.5 ohm coil, or head, I think this will help tremendously! Watts, volts and ohms all corelate to each other, if you have a 2.8 ohm coil, run it at 4.8v. a 1.8 ohm coil can be run at 2.8 and up. Thing is with the 2.8 ohm coil you have your EGO maxed out and can't go higher if you want/need to. The lower ohm coils will give you more flexibility.
- Status
Similar threads
