I have the copper Ragnarok mod and the 510 part for the atomizer is stuck to one of the tubes and i cant get it off. I have tried freezing it and using rubber gloves. Does anyone know a easy way to get it unstuck without damaging anything?? Please.
I have the copper Ragnarok mod and the 510 part for the atomizer is stuck to one of the tubes and i cant get it off. I have tried freezing it and using rubber gloves. Does anyone know a easy way to get it unstuck without damaging anything?? Please.
Try wrapping a piece of cloth around the 2 parts you want to separate (Not the glass) then using a pair of channel lock pliers or 2 with one pair of pliers holding the device and the other around the base of your atomizer, you should be able to loosen it enough to get it off.
I have a Heatvape Invader Mini and my tank is always getting stuck to the adapter ring. Most times I need 2 pairs of pliers, one to hold it and the other to turn it. I thought about duct tape too
You've heard good advice about seperating them. Once you get them apart a light coating of a conductive anti-oxidation compound will help prevent it from happening again.
I'll second the duct tape and pliers haha. When I used mech mods, this would happen quite often no matter what I did. Duct tape and pliers, w few wraps, pliers can go through it easily and mark your mod up and it usually came apart quick.
I have had my atty stuck to the top of my nemesis i used this thing liquid grease let it sit in it for around an hour and with rubber gloves it came undone pretty easy, and just washed the parts and boiled them for 30mins to make sure the grease was off.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.