Mod stuck please help!!!

[Lyle_03]

I have the copper Ragnarok mod and the 510 part for the atomizer is stuck to one of the tubes and i cant get it off. I have tried freezing it and using rubber gloves. Does anyone know a easy way to get it unstuck without damaging anything?? Please.

 

[edyle]

I have the copper Ragnarok mod and the 510 part for the atomizer is stuck to one of the tubes and i cant get it off. I have tried freezing it and using rubber gloves. Does anyone know a easy way to get it unstuck without damaging anything?? Please.

the topcap is stuck to the tube below it?

 

[gofishtx]

Try wrapping a piece of cloth around the 2 parts you want to separate (Not the glass) then using a pair of channel lock pliers or 2 with one pair of pliers holding the device and the other around the base of your atomizer, you should be able to loosen it enough to get it off.

 

[Romano Cheese]

I like @gofishtx plan. If the cloth doesn't work there's always good ole duck tape try wrapping that around it so the pliers don't mark up the mod.

 

[SupplyDaddy]

I have found that the harder I try to separate 2 stuck pieces, the harder they stick together. Step back, breathe and simply twist the parts lightly.

 

[gofishtx]

I like @gofishtx plan. If the cloth doesn't work there's always good ole duck tape try wrapping that around it so the pliers don't mark up the mod.

I have a Heatvape Invader Mini and my tank is always getting stuck to the adapter ring. Most times I need 2 pairs of pliers, one to hold it and the other to turn it. I thought about duct tape too

 

[Solidnailer]

Try a cotton swab dabbed in oil lubricant. It worked for me when my ego mod got stuck all the time.

 

[suprtrkr]

You've heard good advice about seperating them. Once you get them apart a light coating of a conductive anti-oxidation compound will help prevent it from happening again.

 

[dbrandt01]

I'll second the duct tape and pliers haha. When I used mech mods, this would happen quite often no matter what I did. Duct tape and pliers, w few wraps, pliers can go through it easily and mark your mod up and it usually came apart quick.

 

[Lyle_03]

Thanks everyone for all of your suggestions. I want to try the pliers and cloth method, but i think the piece that is stuck is too small.

p.s sorry for the sideways image im new to this forum

 

[KentA]

It's not too small.
Try wrapping a rubber band around the top & position the pliers above the joint.
You'll be surprised at how easily it comes off.

 

[Lyle_03]

Update: It's fixed my vape is working now, so thank you everyone for all of your suggestions i eventually ended up using the pliers and cloth method.

 

[Ryan Jackel]

I have had my atty stuck to the top of my nemesis i used this thing liquid grease let it sit in it for around an hour and with rubber gloves it came undone pretty easy, and just washed the parts and boiled them for 30mins to make sure the grease was off.

 

[KentA]

Has anyone tried WD40?

 

[coolvapes]

I have found that the harder I try to separate 2 stuck pieces, the harder they stick together. Step back, breathe and simply twist the parts lightly.

Works every time with my subox mini rda deck. That thing doesn't come apart with force, it untwists with love!