Modify Evod2 BCC for higher wattage?

[Tobaccotaste]

Hello!
The air holes is big enough, but could i make the holes in the coil bigger and get more juice in the coil? I have a VW mod(Vamo v.6) and want to try vaping 15-20W, but over 10 it just tastes burnt, unless i take hard and very short inhales :/

Is this possible?

 

[Katmar]

Bump..

 

[Tobaccotaste]

I drilled the airholes, but still can not vape more than 1 second at 20W.
Tried putting some extra cotton in the coil, it worked a bit, but the flavors became weak :/

What about drilling the juice intake?
Best regards

 

[Foggy Road]

Hi @Tobaccotaste. First let me say that I have no knowledge of the Evod 2.
However I have modified my standard Evod into quite a nice little *tootle* lung hitter.
I drilled the airholes out to 1/16" but then went a step further and drilled the hole in the positive pin to 5/64". Made a huge improvement in airflow.
I didn't actually use a drill. Thought it might be too hard to control with such tiny parts. For the holes in the base I just spun the 1/16" drill bit between my thumb and forefinger. For the positive pin I clamped the pin in a small vise grip and the 5/64" drill bit in another small vise grip pliers and VERY carefully worked it through.
I'm lung hitting my little little Evod at 1.6 ohm and 8 Watts on my Sigelei ZMax V3 and loving it. Not even curious about pushing the wattage limit. I really don't enjoy rewicking all that much.

 

[Tobaccotaste]

Thank you! I just realized, as the evod is dual coil, shouldnt 20watts on the evod be like 10 watts on a single coil clearo?

 

[Tobaccotaste]

Thank you! I just realized, as the evod is dual coil, shouldnt 20watts on the evod be like 10 watts on a single coil clearo?

I wonder as 15 watts on my evod tastes burnt, but the single coil clearo that i have works fine at 7,5 watts. Shouldnt 15 watts at a dual coil be 7,5 on each coil? (calculated by my VW vamo v6)