Mouth to lung rta under $50 suggestions

[miguelradio]

I searched the threads for an inexpensive rta that is great for mouth to lung. I purchased an Aga t5 for $10 and ended up getting what I paid for. The thing fell apart and I couldn't remove the top cap even when using pliers. Single coil and really easy to build on is what I'm looking for. Was thinking about a Russian 91% v2.

Is there a good rta that has something besides screws to attach the coil to? Those screw contacts are a real pain for a newbie like me.

 

[ashtrayogdc]

Have you seen this thread? Would be the place to ask.

The Overlooked Tootle Puffer Gear Thread

 

[roxynoodle]

Do you mean you want one that has post holes instead of trapping under screw heads? If so, look at:

EHPro Mini Buddha (Vividsmoke has them last I knew)
UTA v2 clone on FT (Ubertoot)
UD Bellus or Goblin Mini v2

Others to consider, but leads trap under screw heads:
Phenomenon Lite clone
Tilemahos v2 clone
Lemo, particularly the v1 or Drop
Hurricane clone (Tobeco may be the best one)
New eXpromizer (eXvape in Germany is the site, but shipping is reasonable and takes less than a week)
Rose v2 or v2s clone. Takes some time to get used to coiling and wicking, but it was my second RTA, and was worth it

 

[roxynoodle]

Have you seen this thread? Would be the place to ask.

The Overlooked Tootle Puffer Gear Thread

My thread . Come over and join us! We talk about gear, our pets and now even underwear!

 

[miguelradio]

My thread . Come over and join us! We talk about gear, our pets and now even underwear!

Great thread! Hopefully someone sees my post there. Could you make a recommendation for what I'm looking for?

 

[roxynoodle]

I made a few . Post 3 in this thread.

 

[godfatherI]

I searched the threads for an inexpensive RTA that is great for mouth to lung. I purchased an Aga t5 for $10 and ended up getting what I paid for. The thing fell apart and I couldn't remove the top cap even when using pliers. Single coil and really easy to build on is what I'm looking for. Was thinking about a Russian 91% v2.

Is there a good rta that has something besides screws to attach the coil to? Those screw contacts are a real pain for a newbie like me.

I think you are describing the bachelor tank. It is postless.

 

[miguelradio]

Oops ya missed those. Yes indeed post holes

 

[miguelradio]

Thanks everyone! Think i'll try an ubertoot v2 and the Bachlor.
I have a good Ole ehpro Kayfun lite plus on its way that I ordered at the same time as my Aga t5 (which in my opinion is a piece of junk).

 

[DaveP]

Thanks everyone! Think i'll try an ubertoot v2 and the Bachlor.
I have a good Ole ehpro Kayfun lite plus on its way that I ordered at the same time as my Aga t5 (which in my opinion is a piece of junk).

I have the EHPro Kayfun 3.1 and it has screws plus holes on the side of the coil deck that you just stick the leads into and tighten down the screws. That's common among RTA atomizers these days. You insert one lead on each side and that allows you to orient the coil to sit across the deck and fan the ends down the sides. Or, you can bring the coil up to sit in line with the screws and bring the ends of the wick down and across the deck horizontally next to the juice inlets in the chimney.

Check out www.VaporRange.com for deals on tanks like you are looking for. Their prices are pretty much unbeatable. The Kayfun 4 is another tank you might like and VR has them for low prices. Just click on "Rebuildables".

How about the EHPro Kayfun Lite Plus V2 for $9.95?
EHPRO