Mouthfuls of juice from new tank.

[weerab]

Is it the tank or do I need to try a new carto? (I have a Volcano Inferno, and have not had any leaking with the tank and carto that came with the kit).
I'm also wondering if a Mini Nova would be easier for a novice to fill etc?
Any help would be appreciated before I throw this tank in the bin (it is a $7.95 job from easyvaping).

 

[r77r7r]

Just blow it out and keep the battery Down. I only get liquid in my mouth when I hold my PV level or tilted up.

Oh, and inhaling too fast/hard.

 

[weerab]

Just blow it out and keep the battery Down. I only get liquid in my mouth when I hold my PV level or tilted up.

Oh, and inhaling too fast/hard.

When I take it apart I keep seeing it drip out the bottom of the carto. Every time I dry it off and have another go it happens again??

 

[MistaKuraudo]

The carto might be overfilled. Either way, I think this is a carto problem not the tank.

 

[weerab]

The carto might be overfilled. Either way, I think this is a carto problem not the tank.

Thanks, I'll try a new one and see what happens.
Anybody have any thoughts on the Mini Nova, and will they work with the Inferno?

 

[klynnn]

I use the vision vivi nova mega and love them. No leaks easy to rebuild the heads. If the inferno is 510 threading the mini will work.

 

[jSquared]

The Mini Vivi Nova will work with an Inferno, but the 2.8 ohm head won't work well on that battery - the other heads should be fine. Apart from the problems you've had with leaking, how do you like cartos? I started off with cartos, and, I must admit, I've never been able to find a clearo that works quite as well for me. Everybody's different, of course. The Vivi's aren't particularly expensive, so just give one a go!

 

[klynnn]

The only thing I suggest is make sure they specify genuine vision as the knockoffs don't always work as well.

 

[weerab]

I use the vision vivi nova mega and love them. No leaks easy to rebuild the heads. If the inferno is 510 threading the mini will work.

That's the one I've been looking at, I think I'll give them a try.
Tried a new carto (from the same store as the tank) and it's still leaking like a sieve.

 

[r77r7r]

Never heard of one actually dripping out the bottom like that. Did you punch your holes too deeply?

If you bought them pre=punched and they're that bad, I'd say they'd be ok to return.

 

[weerab]

The Mini Vivi Nova will work with an Inferno, but the 2.8 ohm head won't work well on that battery - the other heads should be fine. Apart from the problems you've had with leaking, how do you like cartos? I started off with cartos, and, I must admit, I've never been able to find a clearo that works quite as well for me. Everybody's different, of course. The Vivi's aren't particularly expensive, so just give one a go!

Can you tell me what you mean by "2.8 ohm head" ?
I like the carto and tank that came with the Inferno kit OK, but I'm a bit clumsy with the filling (even using the needle tips).

 

[weerab]

Never heard of one actually dripping out the bottom like that. Did you punch your holes too deeply?

If you bought them pre=punched and they're that bad, I'd say they'd be ok to return.

They came punched, but I only bought one tank and a few of their cartos so probably more hassle than it's worth to return (might be me that's screwing up).

 

[klynnn]

The vivi nova comes with 3 heads 1.8/2.4/2.8 ohms. If the inferno is a stick batt you will most likely use the 1.8ohm head as the others need a bit more power. The mega might be a bit top heavy on a stick batt. Sorry just not familiar with the inferno.

 

[klynnn]

A PBusardo Tutorial - Vivi Nova Cleaning & Rebuilding - YouTube

 

[r77r7r]

Can you tell me what you mean by "2.8 ohm head" ?
I like the carto and tank that came with the Inferno kit OK, but I'm a bit clumsy with the filling (even using the needle tips).

Ok, try putting a toothpick or something in that tube when you refill. A carto for a tank doesn't need to be Totally soaked either. They tend to run dry on the top and that's fine.

 

[weerab]

The vivi nova comes with 3 heads 1.8/2.4/2.8 ohms. If the inferno is a stick batt you will most likely use the 1.8ohm head as the others need a bit more power. The mega might be a bit top heavy on a stick batt. Sorry just not familiar with the inferno.

I see what you mean now, I've found a site that says theirs come with a 1.8 ohm.

Vision Vivi Nova Mini Tank

You think they will work?

 

[klynnn]

They should work fine. I just rebuild the heads. At the end of the video link I posted he shows how to do it. The only problem I had with the mini was when screwing the tank onto the base you just have to watch and make sure you don't mis-thread it. If it is mis-threaded it will leak a bit.

 

[weerab]

They should work fine. I just rebuild the heads. At the end of the video link I posted he shows how to do it. The only problem I had with the mini was when screwing the tank onto the base you just have to watch and make sure you don't mis-thread it. If it is mis-threaded it will leak a bit.

Thanks for all your help. Just one more question
The most important thing for me is a heavy throat hit, do you know if the mini will give as good as the regular DCT ?

 

[klynnn]

I haven't had any problems, usually throat hit will depend on the amount of power the battery produces and the juice mix and nic content. You will definitely notice more vapor and throat hit if you upgrade to something like the spinner where you can dial in the voltage. Usually most of the smaller batts are 3.4v and fixed -you then notice a dropoff in power when it gets close to dying.

 

[weerab]

I haven't had any problems, usually throat hit will depend on the amount of power the battery produces and the juice mix and nic content. You will definitely notice more vapor and throat hit if you upgrade to something like the spinner where you can dial in the voltage. Usually most of the smaller batts are 3.4v and fixed -you then notice a dropoff in power when it gets close to dying.

I've been thinking about the spinner, would that still use the same minis with a 1.8 head ?