Mushy buzz button?

[exodus454]

I've had my buzz since slightly after Christmas and the button has gotten really soft. It's really noticeable after using friends' new Ipros and buzzes.. mine you have to position your finger perfectly over the button and mash it. Now it only makes contact after getting your finger completely flush with the body. Theirs makes contact slightly after you start applying pressure.

Is this the button breaking in or is mine heading down the road to failure? It's never failed to fire or anything yet, it's just not as precise and tactile as it once was.

 

[BuzzKill]

It has come loose inside !! we use an industrial super glue to hold them in place , it must have broken loose ! we cna fix it or you can try yourself , If you glue it in a stuck position we can change it out.

 

[exodus454]

How would I go about fixing it correctly? If it's as simple as gluing it back down I can probably handle that.

 

[Bovinia]

It involves super glue and a toothpick if I recall, Ex. I don't remember the specifics tho, sorry

 

[BuzzKill]

Ok remove the top cap ( loosen center screw first ) the switch/button is glued to the inside of the tube , press on it , does it move ? if so then it broke loose .

OK take a tooth pick and super glue , push on the switch , ally SG under the area that was glued before , do NOT get it on the orange rubber button !! then press it back in place from the inside and hold IT ! , this should fix it.

 

[exodus454]

I see exactly what you're talking about and it is a little loose. You recommend just good ol' cyanoacrylate?

Sent from my YP-G70 using Tapatalk

 

[BuzzKill]

I see exactly what you're talking about and it is a little loose. You recommend just good ol' cyanoacrylate?

Sent from my YP-G70 using Tapatalk

Yes or super GEL , gel will not migrate as bad

 

[Ruppy]

Yes or super GEL , gel will not migrate as bad

The wise one speaks smart words! Spring for the gel like mike said. It will save you heartache and glued fingers