RDA MY 1st RDA is on its way
- Thread starter Outcast
- Start date
- th_trl_thread_readers 0
- Status
Looks like a pretty good set-up. You might want to nab some other gauges of wire if and when you can, but you should be just fine. What device are you using it on?
Do you have flush wire cutters? Ceramic Tweezers? Pliers? A torch? None of these are essential, but all make the job a lot easier. I would also recommend a precision screwdriver set or an inexpensive set of drill bits even with the coil jog tool; these just make it a lot easier to actually install the coil.
I have a Twisted Messes and it's really QUITE similar to the 13H/9H. I think you'll like it a lot. It's easy to build on and really pumps out the clouds without sacrificing too much flavor. I haven't tried a TON of RDAs but of the ones I have, the TM at least is a good middle ground. I really can barely see any difference besides the heat sink, so I feel fairly confident in saying that yours will be similarly good. One word of warning, though: juice will get in between the cap and AFC 10/10 times. It's worth having something to wipe on you at all times when you're using it, or sometimes I just leave the AFC off and go for it totally open. I think you can do the same on yours.
Hope it's great!
Do you have flush wire cutters? Ceramic Tweezers? Pliers? A torch? None of these are essential, but all make the job a lot easier. I would also recommend a precision screwdriver set or an inexpensive set of drill bits even with the coil jog tool; these just make it a lot easier to actually install the coil.
I have a Twisted Messes and it's really QUITE similar to the 13H/9H. I think you'll like it a lot. It's easy to build on and really pumps out the clouds without sacrificing too much flavor. I haven't tried a TON of RDAs but of the ones I have, the TM at least is a good middle ground. I really can barely see any difference besides the heat sink, so I feel fairly confident in saying that yours will be similarly good. One word of warning, though: juice will get in between the cap and AFC 10/10 times. It's worth having something to wipe on you at all times when you're using it, or sometimes I just leave the AFC off and go for it totally open. I think you can do the same on yours.
Hope it's great!
ATM I'm using a mvp 3.0 pro will prob be upgrading to a VTbox200 soon
Sent from my iPhone using Tapatalk
Congrats, I'm not familiar with that RDA but RDAs in general are fun. I found a shop nearby me to help with the actual process of building coils, it was really helpful.
Good luck!
Good luck!
That's still plenty IMO. I mean, it won't feel like much compared to a 200W mod when you do upgrade, but I mostly use my TM on an 80W device and it's flippin' awesome.
its like the tm it's a great rda . i use 26ga aswell great start i'ld grab an ohm meter tho
personally i like one . a $8 ohm just seems to give a better reading. my ivp 2.ivp3. 1vp4 ivp d2. sigelei all differ a bit on the mod
I'm loving the 13 heavens 9 hells RDA, really easy to build on too, it's very similar to the Twisted messes RDA but I love the laser engraving on the 13 heavens 9 hells
Are you using a regulated mod or a mechanical?
Right now MVP 3.0 pro fires down to a .2 ohm with a max of 60 watts in a couple weeks I will be upgrading looking at the snow wolf & VTbox200 that will get me up to 200 watts I have looked at mechanicals but I don't think I won't to get in to them having to worry so much on batteries and having to swap them so muchI'm loving the 13 heavens 9 hells RDA, really easy to build on too, it's very similar to the Twisted messes RDA but I love the laser engraving on the 13 heavens 9 hells
Are you using a regulated mod or a mechanical?
Sent from my iPhone using Tapatalk
Funny you should say that, I just got the snow wolf a couple of weeks ago! Haven't had an opportunity to play with it yet, don't forget to marry your battery's (charge and discharge at the same time) no ceremony required
- Status
Similar threads
