The other day I did my first coil re-build.
It was a Kanger T3.
Have used nearly 2 tanks of juice and still going great without the dreaded 'gurgling' I got with the original coil.
I used a 2mm silica wick with 6 wraps of 32 gauge Kanthal. Then another piece of 2mm wick (fluffed up) as the flavour wick (if that's what it's called).
First test (dry) showed 2.2 ohms. After filling with juice and a few toots, it was 2.3 ohms. Still at 2.3 ohms two days later.
Wicks well. No leaks. No gurgling. Great vapour at 3.8 volts. Flavour is there.
I'm a happy chappy.
It was a Kanger T3.
Have used nearly 2 tanks of juice and still going great without the dreaded 'gurgling' I got with the original coil.
I used a 2mm silica wick with 6 wraps of 32 gauge Kanthal. Then another piece of 2mm wick (fluffed up) as the flavour wick (if that's what it's called).
First test (dry) showed 2.2 ohms. After filling with juice and a few toots, it was 2.3 ohms. Still at 2.3 ohms two days later.
Wicks well. No leaks. No gurgling. Great vapour at 3.8 volts. Flavour is there.
I'm a happy chappy.
