My first dual coill RDA...please help!
- Thread starter time2quit
- Start date
- th_trl_thread_readers 0
- Status
Well, I'm not a dripper myself, although I did try it, and I was shooting for .8 ohm when I did this with an IGO-W. I did 12 wraps of 28 kanthal on a 5/64 drill bit, so just wrap a couple more loops on it and you should be good to go. BTW, I found dripping was not my cup of tea, and went right back to my genny where I've been happy ever since.
If you have an Android device download a free app from Google Play called "Vaper's Toolbox". It was made by a member here: ScottP!
It is a wicked simple app that works great! Just plug in what you want to make, gauge wire, target Ohms and size of coil and it will tell you how many wraps to make. I find it very accurate and... according to it, for a 28 gauge 1 ohm dual coil you should make two 12 wrap coils with a 2mm diameter.
It is a wicked simple app that works great! Just plug in what you want to make, gauge wire, target Ohms and size of coil and it will tell you how many wraps to make. I find it very accurate and... according to it, for a 28 gauge 1 ohm dual coil you should make two 12 wrap coils with a 2mm diameter.
He's a 1ohm build with 28ga I recommend running the wick like this if holds a lot and it is easy to drip.
Its actually a quad coil but it's easy that was the first time I ever tried it, you'll impress yourself.!
Its actually a quad coil but it's easy that was the first time I ever tried it, you'll impress yourself.!
- Status
Similar threads
