My new GGTS w/AVS

[icemangrafx]

Hello All,

I would like to say thank you to Imeo and Gary of ggecigs.net for delivering my new GGTS w/AVS in time. I was amazed at the beauty of the mod. It is super light without battery. I ordered on the 13th Aug when the new stock just arrived in Aussie. Sent emails to Gary enquiring about the GGTS availability and mode of payment. Communication with Gary was very good and prompt. Really appreciate it. Received the items today, at 10:45am. It was packed as I've requested, disassembled. Once I received the packaged, I look at it piece-by-piece. Amazing works of art. Start to assemble them but I was not able to try the AVS since, it does not come with the IMEO901 atty. It was to be purchased seperately. I should have bought it if I knew it's not included..

Anyway, I tried it with a normal 510 atty and a 510 cartomizer. Battery contacts were good and when screwed-in, there is no rattling sound. It could be that I'm using a single CR2 at 3.7V. I can't really say about the vapor yet, since I did not vape on it, just tried it to see if my merchandise works. The atty sizzles when button is pressed. So, it's ok. Working great. As compared to my new mako minno, the minno is much smaller than the GGTS, but again, two different mods. Will get back to that later when I've put them to pace...

Will post picture and size comparison with the Mako minno... This is my first mod (mako and GGTS) at the same time... I've never vape at 3.7V before with a 510 atty and boy... there was tonnes of vapor produced by these mini mods... I'm glad to have purchased them... Will be sticking with them for some time... I can always vape at higher Voltage with the GGTS...

Comparison with a Mako Minno with a LR510 atty on CR2 600mah 3.7V.

View of the GGTS serial number

Another view of the engraving

The Mako Minno size in hand

The GGTS size in hand

With AVS (Automatic Vaping System) mounted onto GGTS

Cheers,
Jay

 

[HoPeFuLLL]

Enjoy, Really surprised me how quick the postage was. Thanks for your kind words.

I find normal 901 attys great at 6.4V (2x17340's) in the AVS, just make sure they are very wet prior to applying power the first time.

 

[icemangrafx]

Hi Hope,

After vaping on both unit with the same atty and same juice, to me it seems that the GGTS produces more vapor consistenly. The mako is still a nice small mod and produces good mount of vapor but to compare with GGTS, I'm impressed more towards GGTS. Due to the design construction of the CT (Collection Tank), it does help reducing the sizzling from the atty and with draw adjustment, it is GREAT!...

I think with the AVS it sure seems to be a clear winner, hands down... Got to give it to IMEO. Great product. Worthy investment in the long run. I think I will bring this overseas..

Regards,
Ice

 

[T-Hefner]

Ice,
Hey man, Glad ya like your GGTS w.AVS .... It really is a great device...I have no experience with the Mako, but I know the GGTS v2 is awesome.... Looks great, vapes great, plus all the new stuff like adjustable draw, collection tank, and all those nice features.

Anyways, Glad ya like your GGTS.... Let us know if ya have any issues....

-Tim

 

[icemangrafx]

Hi Tim,

Thank you for your kind and helpful words. Really appreciate it man..
Since the item is new, so does the atty. When I dripped like 4 drops into the LR510 atty, it has a gurgling (not sizzling) sound during inhale. Does that mean my atty is flooded? The draw was smooth and easy though.

I know Imeo mentioned before that it could be flooded so either blow it out or inhale with the airholes closed to wet the wick (primer puff) without pushing the button but still having that sound. Am I doing it correctly?

The Mako Minno is also new to me. I wanted a mod to upgrade from KR808D-1 due to short battery life and less vapor (might due to the PG base liquid). But when the mods arrive with the 510 atty, no wonder, most of the vapers prefer 510 because they produces good amount of vapor.

Regards,
Ice

 

[mwa102464]

Best to here a little gurggle then to run dry becaue if your running to dry for to long you'll end up hearing nothing at all and your Atty will be dead with these LR's keep em wet real wet and they last for a long time. I have quite a few GG units and I am having amazing results with two GGTS/AVS units I have been running for a long time, one has an LR901 in it and the other has an I6 901 in the tank, I put them both in on the same day to do a small test that I thought wouldnt take nearly this long to see which would last longer, they are both still running like new after a month in the tanks and I mean like new, I cant belive it, and I chain vape like no other you have ever seen but both of these things are going into week five as of today.!


I also have not taken either tank apart or cleaned either Atty at all. When I get down to about an 1/8 of a tank I just refill with the same juice thats in each tank as well. So for all you guys that take apart and clean you units daily there is no reason to do this in my opinion just suck up the leftover juice in the bottom tank and put it back in the top tank, because I belive the more you mess with the Atty and take it apart and or clean I belive it will contribute to the death of the Atty, this is all part of this experiment I am doing. I will post results when it's time

 

[HoPeFuLLL]

Mine needed a clean after 10 days or so. It started to struggle.

 

[mwa102464]

Struggle in what way Hopefulll

 

[mwa102464]

I thought to myself as long as I'm using the same juice why cant I keep just refilling when I'm low and only change Batts and clean the bottom tank and how long can I go doing this.? So 5 weeks ago today I loaded an Imeo i6 in one tank and a LR901 from Heavans gifts in the other tank and other than cleaning the bottom run off tank, changing Batts, and wiping off the unit with a damp rag I have not messed with the main tank or Atty as of yet and I have not had one issue like I said and both are running like new with no problems what so ever as of yet, I also see no reason to mess with it unless you where changing flavors and juice. Anyway I want to see some other things on the test as well and will report my final results but as of right now I am very surprised already and this tells me quite a few things about my AVS units

 

[icemangrafx]

The Collection Tank is a good and ingenious design. Will this also wet the atty when excess juice overflow into the tank?

-Jay

 

[Necromancer]

Hey Jay, I just replied you in PM and realized you bought GGTS ! Congrats and good for you!! Now vape like a king!! One thing to note though, don't over tighten when you open the locking mechanism , else you will have problems locking it back later (The whole switch will come out) , found out when I was absentmindedly playing with the switch during a meeting heheh.

PS: You got me tempted to get the AVS ><

Here's the GGTS with 6V (15270) Batteries.. Bought from Dealextreme (SKU932).. The hole on the table came from trying drill a hole on a battery box to make my own box mod.. haha!

Hmmm.. time to polish my GG soon..

 

[vapn]

Are you running those batts in that direction?

 

[T-Hefner]

I have noticed a minor problem, Looking for some feedback...

I am noticing my bottom tank, or overflow tank, is getting a lot of liquid....

Now, I am playing with the CR...but I never go wide open, I play with it from a quarter turn to almost 3 quarter of a turn... and the AVS is hitting like a champ.... but I am noticing the tank below avs is taking on lots of liquid... It isnt filling..but its up to the atty connection...so its a decent amount..

What is everyone else seeing as far as this go's ? Maybe I have CR to open? But I really am not opening too much... Just want some feedback....and what you are experiencing..

-Tim

 

[HoPeFuLLL]

I tend to do a refill Hef then take the AVS off and use a needle to empty the collection tank. Quick and easy.

 

[Necromancer]

Are you running those batts in that direction?

No no of course not! lol just putting the batteries to show the size and part number

 

[clyde2801]

I thought to myself as long as I'm using the same juice why cant I keep just refilling when I'm low and only change Batts and clean the bottom tank and how long can I go doing this.? So 5 weeks ago today I loaded an Imeo i6 in one tank and a LR901 from Heavans gifts in the other tank and other than cleaning the bottom run off tank, changing Batts, and wiping off the unit with a damp rag I have not messed with the main tank or Atty as of yet and I have not had one issue like I said and both are running like new with no problems what so ever as of yet, I also see no reason to mess with it unless you where changing flavors and juice. Anyway I want to see some other things on the test as well and will report my final results but as of right now I am very surprised already and this tells me quite a few things about my AVS units

I thought I was having trouble with my avs'es until hopefulll clued me in yesterday that my ggts'es probably needed cleaning.

How often are you having to dump juice from the CT? It seems that every couple of hours my vape lessens with my LR, and I take a dump accordingly. Is this is a breaking in or seasoning sort of deal where it diminishes with extended use?

And Hopefulll, I appreciate your needle suggestion, but I don't really want to carry one into courthouses every day, capice?

My understanding of the CR is that the more open it is, the more air goes to the atty, more closed means more juice. Wouldn't a wide open CR result in more juice in the CT than a less open one?

 

[HoPeFuLLL]

Clyde I only got half way through explaining and you left

 

[Zaiden]

I have never had a single drop of liquid in my collection tank. I have no idea how there is no leaking, but this AVS is perfect. I stopped swapping flavors b/c there is no better joy than just filling it up for the day and vaping non-stop with no leaking. I love this thing...I want to buy another just to have a second flavor b/c I refuse to drip anymore. My fear is that the production of these units seems to be iffy from everyone's issues. I must have been the lucky few to get the non-issue GGTS+AVS.

I really hope Imeo comes up with the 510 adapter for this AVS along with variable voltage. He does this and I will never ask for anything ever again.

 

[Stormynights]

I have never had a single drop of liquid in my collection tank. I have no idea how there is no leaking, but this AVS is perfect. I stopped swapping flavors b/c there is no better joy than just filling it up for the day and vaping non-stop with no leaking. I love this thing...I want to buy another just to have a second flavor b/c I refuse to drip anymore. My fear is that the production of these units seems to be iffy from everyone's issues. I must have been the lucky few to get the non-issue GGTS+AVS.

I really hope Imeo comes up with the 510 adapter for this AVS along with variable voltage. He does this and I will never ask for anything ever again.

I am wanting those too but in the mean time I drilled a hole in an adapter and now I am using 510 cartos in my AVS. It works great but Imeos will be safer I am sure.

 

[LACENAIRE35]

Thanks for the photos , specially the comparison with the mako mino

Joel