Need a bit of guidance here. I will try to keep it simple more for myself I think.
When I bought my Lambo 4.0 it came with NCM 18650 1800mah batteries. I have been using them in rotation charging them in a Trustfire tr001. Recently bought the smok Telescope and also was lucky to get an Omega. I never really worried too much about using the stock bats in the Lambo with all the safeties it had.
Now that I am using mech tubes with nothing more than air vents I was a little concerned so I purchased some Trustfire Li-ions 18650 and some IMR 18350 800 mah (blue).
My problem started with the Trustfires being a bit longer therefor not totally fitting into the charger. I scraped some of the covering on one batt somehow and will not use either one of them as I didn't like how they sat in the charger. I assume these are PCB adding to the length.
I am lost as to if the tr001 actually is safe for charging 18350s as some sites say yes and some dont say at all.
I have settled on purchasing 4 new AW IMR 18650 (red) in either 1600 or 2000 mah and some more 18350 700 mah (red).
Here is my questions
1. Where is the best place in Canada (Ont) if possible to purchase these? Im not overly concerned about price but I see some at 8 bucks all the way up to 17 for the same batt.
2. Do most use more than just a safe batt in their mech tubes or should I buy something more? Im thinking of the Kick anyways.
3. Would you still use the NCM 18650s that came with the Lambo but only in that alone?
Im sure I have more but dont want to scare of too many responses.
Thanks for reading
When I bought my Lambo 4.0 it came with NCM 18650 1800mah batteries. I have been using them in rotation charging them in a Trustfire tr001. Recently bought the smok Telescope and also was lucky to get an Omega. I never really worried too much about using the stock bats in the Lambo with all the safeties it had.
Now that I am using mech tubes with nothing more than air vents I was a little concerned so I purchased some Trustfire Li-ions 18650 and some IMR 18350 800 mah (blue).
My problem started with the Trustfires being a bit longer therefor not totally fitting into the charger. I scraped some of the covering on one batt somehow and will not use either one of them as I didn't like how they sat in the charger. I assume these are PCB adding to the length.
I am lost as to if the tr001 actually is safe for charging 18350s as some sites say yes and some dont say at all.
I have settled on purchasing 4 new AW IMR 18650 (red) in either 1600 or 2000 mah and some more 18350 700 mah (red).
Here is my questions
1. Where is the best place in Canada (Ont) if possible to purchase these? Im not overly concerned about price but I see some at 8 bucks all the way up to 17 for the same batt.
2. Do most use more than just a safe batt in their mech tubes or should I buy something more? Im thinking of the Kick anyways.
3. Would you still use the NCM 18650s that came with the Lambo but only in that alone?
Im sure I have more but dont want to scare of too many responses.
Thanks for reading
