Hi there I have new coils on the way fory aspire e-ts they should be here soon I hope but right now mine is spitting oil right in my mouth is there anything I can do to stop it
Need a quick fix
- Thread starter Newbie sam
- Start date
- th_trl_thread_readers 0
- Status
Hi Sam!
Try this:
Take the bottom off the tank. Remove the coil. Rinse out the tank and base with hot water. Hold the coil right up to the faucet screen so that hot water is forced through it. Do it from both top and bottom of coil. Dry everything thoroughly. If you rinse everything in alcohol after the hot water it will speed up the drying process. reassemble, fill with juice and let it sit upright for a few minutes to get the wicks/coil wet. Dry hit it until you taste the juice. Fire it up. Good luck!
Try this:
Take the bottom off the tank. Remove the coil. Rinse out the tank and base with hot water. Hold the coil right up to the faucet screen so that hot water is forced through it. Do it from both top and bottom of coil. Dry everything thoroughly. If you rinse everything in alcohol after the hot water it will speed up the drying process. reassemble, fill with juice and let it sit upright for a few minutes to get the wicks/coil wet. Dry hit it until you taste the juice. Fire it up. Good luck!
Please let me know if it works. In my experience, if it doesn't, only a new coil will do it.
Excellent! That's the same technique I use to change flavors in the same tank. Works every time.
Great way to help. I'm sure you don't mind, but I put this post in my notes so I would be able to help someone also with this problem.
So glad you have your problem solved. Easy to see why ecf is such a wonderful place.
- Status
Similar threads
