Need help with my build

[Abhirup]

I have already posted a diagram...if i am to discard the ce4 chip then what more should i add so that to maintain proper current....??

 

[Abhirup]

Can i use this mosfet while using 2 18650 in parallel?

 

[Thumpszilla]

It doesn't appear that I have any 510 connectors left though. That switch will more than run a mod.

Sent from my Z981 using Tapatalk

 

[Abhirup]

Thanks for your input Thumpszilla..will contact you soon...

Meanwhile would like to get my circuit done..can anyone please let me know the circuit i made is ok and safe or not...image is attached here...using 2 18650 in parallel and 12awg copper wire for connections...and mosfet is p55nf06
and a 10amp switch...meanwhile would stick to the 510 that came with the ce4 (i removed the ce4 chip from the circuit altogether..)...please xperts see my chip and the design and let me know if it is fine or not.

 

[Izan]

Thanks for your input Thumpszilla..will contact you soon...

Meanwhile would like to get my circuit done..can anyone please let me know the circuit i made is ok and safe or not...image is attached here...using 2 18650 in parallel and 12awg copper wire for connections...and mosfet is p55nf06
and a 10amp switch...meanwhile would stick to the 510 that came with the ce4 (i removed the ce4 chip from the circuit altogether..)...please xperts see my chip and the design and let me know if it is fine or not.

more will be revealed.
Modding Forum

Have fun
I

 

[BrotherBob]

I am making a vape box...what i actually did is made a wooden box and attached a ce4 chip connected to the 510 tank connector...and instead of the battery the ce4 had,i replaced that with 1 18650 battery...i use a tp4056 module to charge the battery and this chip has over charge protection and below voltage protection as well...when i am using the ce4 clearomiser i used my multimeter to see that at 4v the unit is using about 1.5 amps of current...so that gives me that the clearomiser is of about 2ohm...but if i replace the ce4 clearomiser with one with 1.8ohm will it be good or its gonna give me trouble..keeping in mind the ce4 chip turns of battery connection after 10sec,the tp4056 protecting from under discharge of battery and the battery rated at about 2600mah...the tp4056 having battery protection circuit as well..though after 10 drags the ce4 atomiser gets too hot,will replacing it with 1.8 ohn clearomiser will my ce4 chip be able to power it and vape?hoping that when the calculation shows that at 4v and 1.8ohm the current is 2.3amps almost and tge ce4 module should allow that current to flow throug that
Please suggest me and dont forget to help me out...being a newbie in vaping criticise is always welcome.

Welcome and glad you joined. Glad to see you are already pushing the envelope.

 

[Thumpszilla]

Guys does anyone have a good 510 they could pif to this guy? If you wanna send it to me and let it ride to India with the tanks and button that is fine with me. I moved recently and can find everything but 510's.

Sent from my Z981 using Tapatalk

 

[Abhirup]

Finally my mosfet didn't seem to work....so made the box as the diagram...no issues till now...using the old 510 and clearomizer....so some one tell me..since this is a unregulated one....ohms law shows me that at 4.2 volts...if using a 1.5ohm clearomizer i use about 3amps of current ie. 12watts almost...so is it safe...using a 1.5ohm clearomizer?

Planning to get hold of a new 510 and a good clearomiser soon and also making my own vape liquid. Keeping in mind...the wires and switches i used can handle 10amps currents..is the thing ok?

 

[Abhirup]

Any reply?

 

[Izan]

What battery do you have? Can it handle 10 amps?
We would love for you to be a long term, safe, vaper.
A few weeks wait may seem like a long time, but a severe injury can last a life time.
If you have the option, order a regulated battery device. eleaf Pico, Joyetech Evic mini or what ever your budget will allow.
Sir Mooch has shared his amazing work with us, it's best to heed his advice.

cheers
I

 

[classwife]

Moved this to the Modding Forum from New Members