need help with subox starter kit im new ( juice spitting )

[jemton]

changed the wick many times.. still spitting.. made sure everywhere is tightly sealed but still spitting...


and yes my wick is covering both the holes

and when im about to finish the juice in my tank i can see mist on my tank glass is that normal?


also notice if i inhale too hard more juice comes up

 

[EBates]

Spitting is the result of flooding
Flooding can have several possible causes:
Wattage/Voltage set too low.
Airflow set too low (tight draw).
Try this:
Remove the tank from your mod. Wrap the tank in a paper towel Blow through the drip tip 4-5 times. This should cause the excess juice to be forced out through the tank's air holes.

 

[Bunnykiller]

is it a gurgling spit or a popping spit?

 

[jemton]

popping spit

 

[DavidOck]

Might be too little wick, or drawing too hard.

While cotton will expand a bit when wet, you do need a little "drag" on the coil. If rayon, it needs to be tighter. Other wick materials may behave differently.

And a little condensed vapor inside the tank, when it's nearly empty, is normal. You can clear that by continuing your draw a bit after releasing the fire button.

 

[SpaceApe]

Sounds like you might need a little more wicking material in the coil tbh.

And yes the condensation is normal.