Need help with wraps

[PlanetTune]

So I've been building for a while, don't normally go below .5 ohms just due to the lack of airflow.

And I'm receiving a Mutation X tomorrow, so I'd like to know what common wraps ect are for a .3 or so ohm build.

I currently have 32, 28, and 24 gauge kanthal.

Just looking for the best build to blow clouds. Twisted 28 maybe?

I'd really appreciate the help!

 

[p7willm]

What battery are you using, will it handle the amps?

What resistance are you looking for. .3 or so means to me .4 to .2 a difference of over 10 amps.

Whatever you do use an ohm meter to check the build before you fire it and stay safe with your battery.

 

[PlanetTune]

What battery are you using, will it handle the amps?

What resistance are you looking for. .3 or so means to me .4 to .2 a difference of over 10 amps.

Whatever you do use an ohm meter to check the build before you fire it and stay safe with your battery.

Im aware to stay safe, I'm using efest 18650s 35 amp within a ZNA 50 watt mod. I also have a few 30 watt box mods.

Yes, I'm not a beginner. I know what I'm doing, I was building before I owned an ohm reader and was perfectly fine. But I do have one in case.

I'm going to be doing a sleeper build with 24g kanthal at 9 wraps to get roughly .3 ohms.

 

[Cullin Kin]

I'm a fan of 7 wraps of 24 gauge kanthal on a 2.9mm mandrel, duals. It should come out right around 0.3Ω or just above.