Need some help...

[Mr.Mad]

Just purchase a GGTS from the classifieds on ECF forum.. Im excited but also confused.. I want to purchase the juice feed system. The GGTS I purchased was purchased new in April I have no idea which juice feed system I need.. I know I want all the bells and whistles for this mod. I went to vaporkings website now Im more confused. I know I want the adjustable draw for a 510 901 thats all I can tell ya. HELPPPP.

 

[urbanite]

You most likely have the Revision 1 of GGTS:

Check wiki for pictures here: GGTS - E-Cigarette Wiki

so for all the bells and whistles you'll want:

1 x AVS + Collector Tank (AVS Upgrade for old GGTS)
1 x 510/901 Adjustable Draw Lid

Optionally you can buy:

1 x 801 Adjustable Draw Lid
1 x Fuse Upgrade

That should be enough to bring you up to date...

 

[Mr.Mad]

Thanks for the info.. Do i need the 106 or 79.50 part for the AVS upgrade or do I need them both and vapor kings is sold out of the adjustable draw for the 510/901 option.

 

[imeothanasis]

Hi my new friend Mr. and welcome to GG world.

As urba said, you need the 106 dollars AVS and the 901/510 cap for adjustable draw.

Optionally you can buy:

1 x 801 Adjustable Draw Lid
1 x Fuse Upgrade

as urba said again

 

[Mr.Mad]

Thanks for the info specfically telling me I need the 106 one that much I understand.. Once I get the GG in my hands Ill know what I got ... Im looking forward to vaping nirvana.

 

[VPDownunder]

You may also want to get some of the turbo cartos from vapornine.com and modify them, there's a thread on how to do it on this forum and also on the GG Wiki, using these solves any possible leaking problems in the AVS

 

[VaporKings_Michelle]

We should have more draw caps in stock for the 901/510 and GGTS's next week.

 

[Mr.Mad]

Do I need the draw cap .. I just purchased the AVS and Tank for a older GGTS.#327. Is the draw cap necessary... Because I aint getting jack out of this AVS.. I got somemore 901 attys coming.


The control ring on the AVS is that for adjustable draw? or how much eliquid that feeds into atty?

If the new 901's dont do it... Im going to use a 510 atty with this AVS somehow.. so far I aint diggin the 901's well see when the new 901's come in.


I love the GGTS with a 510 atty.. but want to use the AVS which is a no go till the new attys get here.

 

[Mr.Mad]

You may also want to get some of the turbo cartos from vapornine.com and modify them, there's a thread on how to do it on this forum and also on the GG Wiki, using these solves any possible leaking problems in the AVS

Thats kewl.. not a big fan of Cartos.. But what about using 510 attys in the GGTS AVS tank? Thats what I want to do... Im a fan of 510's @ 3.7 volts and dont like LR510's they taste burnt to me.

 

[HoPeFuLLL]

Do I need the draw cap .. I just purchased the AVS and Tank for a older GGTS.#327. Is the draw cap necessary... Because I aint getting jack out of this AVS.. I got somemore 901 attys coming.

only needed without the AVS, can be handy at times though like when you strip the AVS down for cleaning or for a change.

The control ring on the AVS is that for adjustable draw? or how much eliquid that feeds into atty?

Yep, it requires a bit of tuning to find your sweet spot, nearly fully closed helps draw more liquid in.

If the new 901's dont do it... Im going to use a 510 atty with this AVS somehow.. so far I aint diggin the 901's well see when the new 901's come in.
I love the GGTS with a 510 atty.. but want to use the AVS which is a no go till the new attys get here.
Thats kewl.. not a big fan of Cartos.. But what about using 510 attys in the GGTS AVS tank? Thats what I want to do... Im a fan of 510's @ 3.7 volts and dont like LR510's they taste burnt to me.

Use a 510/901 adapter (or other way around). Some just work, others require the top filed down a bit and the 4 slots put back in. 901 are very similar to me though.

 

[Mr.Mad]

only needed without the AVS, can be handy at times though like when you strip the AVS down for cleaning or for a change.



Yep, it requires a bit of tuning to find your sweet spot, nearly fully closed helps draw more liquid in.



Use a 510/901 adapter (or other way around). Some just work, others require the top filed down a bit and the 4 slots put back in. 901 are very similar to me though.

Thanks for the info on the 510 adapters... so what your saying the liquid is drawed in through the 4 slots on the 510/901 adapter? instead of knocking a hole in the 510 atty.. I ruined 2 901 attys this morning... They glow red but draw very little air.. before my dremel ate the insides of the atty. The GGTS i get hits everytime when I drip its fantastic.... but gonna experiment with the 510 like you said above.. I wish there was more info on the 510's in the AVS tank. Well see I might just love the 901's just got 2 bum ones now there destroyed. And Im concerned for no reason.... Waiting on the Postman. DOH

 

[HoPeFuLLL]

Get em wet before applying power, very wet.... Better to clear a flood than replace an atty...

 

[imeothanasis]

Better to clear a flood than replace an atty...

True........

 

[Mr.Mad]

I finally found the sweet spot on this GG .. performance is OK at best.. Im using 3.7 and a used 901 atty. I got new 901 attys coming. And the AVS does have a learning curve. So far So good.. But its not a 510 but I got adapters coming. I think Im going to purchase a 2nd GGTS with AVS... I like to have spares. And honestly I think this is the best ecig I have every used... Because the problems Im having are ATTY problems and user errors but Im getting the hang of this device.. Good Job on a great ecig.


I am now the proud owner of a 2nd GGTS AVS#764

 

[HoPeFuLLL]

Give these batts a go x 2 (6.4V):

DealExtreme: $4.83 17340 / CR123A Rechargeable Lithium LiFePO4 Battery 2-Pack (350mAh)

Need this charger (switch to 3V):

http://www.dealextreme.com/details.dx/sku.1236

or this.

http://www.dealextreme.com/details.dx/sku.44091

 

[imeothanasis]

I finally found the sweet spot on this GG .. performance is OK at best.. Im using 3.7 and a used 901 atty. I got new 901 attys coming. And the AVS does have a learning curve. So far So good.. But its not a 510 but I got adapters coming. I think Im going to purchase a 2nd GGTS with AVS... I like to have spares. And honestly I think this is the best ecig I have every used... Because the problems Im having are ATTY problems and user errors but Im getting the hang of this device.. Good Job on a great ecig.


I am now the proud owner of a 2nd GGTS AVS#765

Very nice Mr. I am glad you finally master it. I am sure you will enjoy it like no other cig you had

 

[Mr.Mad]

Give these batts a go x 2 (6.4V):

DealExtreme: $4.83 17340 / CR123A Rechargeable Lithium LiFePO4 Battery 2-Pack (350mAh)

Need this charger (switch to 3V):

DealExtreme: $11.54 UltraFire 3.0V/3.6V CR123A Charger

or this.

DealExtreme: $14.50 UltraFire WF-188 Rapid Charger for 3.2V/3.7V Lithium Batteries (100~240V)

If I get those batteries what type of atty will I need... I dont like a burnt taste.. Im mainly 3.7 with a standard atty?


I used this GGTS AVS for a entire day today.. I am having to run the control ring wide open and still hear gurgle gurgle... So its all good right.. When the gurgle gurgle goes away I need to close the ring some till I hear gurgle gurgle again Right? ... without the battery button pushed?

Does that sound about right.. I would rather ask dumb questions than kill 2 more attys doh.

I find myself constantly opening and closing the ring... Ive already vaped a tank of juice today @ 24mg probally because its a new toy And a shiny one at that.

 

[HoPeFuLLL]

Just remember, sometimes the gurgling is because juice is in the CT, extract with a syringe. 6.4V I have used attys from 2.8 to 6 ohms... but I have also had some in that range not like it. Cartos are the cheapest option to get it going or get attys over 5 ohms.