hope this is the right area to ask this....
basically im using the Kanger Protank and finally came time to rebuild my head, however after a couple puffs i get the burnt rubber taste. After checking it i noticed the stem end of my coil is turning red so i can only assume the taste is the rubber burning. i have tried with 32gauge kanthal as well as 34. ohms i get between the 2 are from 1.3 - 2.0 with the 32 and 2.1-2.6 with the 34 ( i have broke down and rebuilt several times now and i feel that i am wasting material). im doing about 4/5 wraps to achieve these results. I have finally got a little better performance but the only thing i have done different was folding the wick over each other so essentially im wrapping 2 wicks... however every few puffs i get that taste but then it goes away untill the next few puffs..... Anyways, jsut looking for tips or suggestions on what i can try doing to stop the positive side of the coil from turning red hot while the rest stays the same color... thanks in advance.
basically im using the Kanger Protank and finally came time to rebuild my head, however after a couple puffs i get the burnt rubber taste. After checking it i noticed the stem end of my coil is turning red so i can only assume the taste is the rubber burning. i have tried with 32gauge kanthal as well as 34. ohms i get between the 2 are from 1.3 - 2.0 with the 32 and 2.1-2.6 with the 34 ( i have broke down and rebuilt several times now and i feel that i am wasting material). im doing about 4/5 wraps to achieve these results. I have finally got a little better performance but the only thing i have done different was folding the wick over each other so essentially im wrapping 2 wicks... however every few puffs i get that taste but then it goes away untill the next few puffs..... Anyways, jsut looking for tips or suggestions on what i can try doing to stop the positive side of the coil from turning red hot while the rest stays the same color... thanks in advance.
