Needle bottles

[Dianhoonho]

<Please deleted this post>

can't post the link... got censored, it's the Ali Express website, think it's not allowed here.

Cheers!

 

[Moodyfisherman]

Link doesn't work for me

 

[Sigmazxcs]

I'm getting a needle bottle from FT, along with some drip tips. The bottle is well built, stainless steel with pressure push button underneath (like a mech mod). Holds 10ml and has a stainless steel cover for the needle too. Not bad, hard to miss on FT page under e-cig bottles.

 

[Dianhoonho]

Was thinking along the lines of the caps having a needle...so I can just replace the caps on my existing bottles with the needle caps.

 

[gpang788]

Use the long nozzle that comes with those small superglue tubes (e.g. elephant glue) and find a way to attach it to the existing nozzle on your bottles.

I use normal masking tape and rubberband. Works great. No leaks.

 

[vantage07]

Was thinking along the lines of the caps having a needle...so I can just replace the caps on my existing bottles with the needle caps.

previously i thought it works that way too, and realised different vendors' cap threading are not same (e.g. avejucie use a tighter thread than e.g. hhv). ordered a innokin ucan as described by sigmazxcs, hope the needle part is long enough for clearo like my ego-cc which happened to have a very small and deep port for adding juice.

 

[chris85e]

if u ordered the ucan v2 should be ok.

previously i thought it works that way too, and realised different vendors' cap threading are not same (e.g. avejucie use a tighter thread than e.g. hhv). ordered a innokin ucan as described by sigmazxcs, hope the needle part is long enough for clearo like my ego-cc which happened to have a very small and deep port for adding juice.

 

[EU6EN3]

previously i thought it works that way too, and realised different vendors' cap threading are not same (e.g. avejucie use a tighter thread than e.g. hhv). ordered a innokin ucan as described by sigmazxcs, hope the needle part is long enough for clearo like my ego-cc which happened to have a very small and deep port for adding juice.

Why dun you use a syringe instead? you can have diff vol/ml n all fits to the needle head. What i do is, i get those thick needle and sand off the sharp portion. Remember to get those come with protector for the needles. Then you can bring it out together with your tank.

It is slim and light for easy keeping..

If some have kids, i am sure you have those given by KK.. just fix a needle to the tip and it can be use also

 

[vantage07]

Why dun you use a syringe instead? you can have diff vol/ml n all fits to the needle head. What i do is, i get those thick needle and sand off the sharp portion. Remember to get those come with protector for the needles. Then you can bring it out together with your tank.

It is slim and light for easy keeping..

If some have kids, i am sure you have those given by KK.. just fix a needle to the tip and it can be use also

I have since changed to syringe only for ego-cc or I'll just take out e silicone gasket. What kinda protector is it for the syringe? Can show a pic on it?

For now I usually bring 2 tankfull of juice when I go out. So the ucan v2 should helps.

 

[EU6EN3]

is easy and convenience

 

[danny4x4]

View attachment 298304

is easy and convenience

That looks familiar....... take out the plunger and examine the black rubber piece. Rub it with your thumb. If you see black rubber particles, throw away the tube and plunger. Keep the blunt needle and get another couple of tubes from the pharmacy.

 

[vantage07]

View attachment 298304

is easy and convenience

alrite, thanks