I'm looking for another mech mod to add to my collection, I was just curious if anyone has tried the Nemesis clone. I really like the look of the mixed edition. If anyone has this mod, do you have any complaints with it and would you recommend it? Also is there a gap when mounting rda's? I want a mod that is going to look flush and clean with my IGO-W
Nemesis clone?
- Thread starter kiwisoop
- Start date
- th_trl_thread_readers 0
- Status
http://www.e-cigarette-forum.com/forum/apv-discussion/539118-my-nemesis-clone-story.html
I would recommend HCigar, just because that's what I gots.
the igo w will sit flush against the top of the neme but it a mm or 2 smaller diameter, so that won't be a "flush" look, but i like how mine looks.
I would recommend HCigar, just because that's what I gots.
the igo w will sit flush against the top of the neme but it a mm or 2 smaller diameter, so that won't be a "flush" look, but i like how mine looks.
Could you post a picture of it with the igo w mounted on it? I don't mean to be a hassle, I just want to see how it looks.
I've got a hcigar clone as well & love it, Only thing get some magnets for the switch
there's one in the op of that thread.
that one in fact
hope that helps. I have the brushed SS version and that's a protank drip tip, was all i had at the time, looks good with a wide bore brushed finish drip tip to match the neme i got.
that one in fact
hope that helps. I have the brushed SS version and that's a protank drip tip, was all i had at the time, looks good with a wide bore brushed finish drip tip to match the neme i got.there's one in the op of that thread.
that one in fact
Yeah I see what you mean when you said it doesn't sit "flush", but I have to admit I love the way it looks. All that silver just looks incredible
I love my Nemmy Clone. I need to drill out the air holes on my IGO-W to be able to vape it the way I like to vape. But right now a Trident clone lives atop of it and so does my Kayfun(pictures included below). I do recommend doing the magnet upgrade because the switch can be a little screwy if you are using flat top batteries. The Nemesis is one of the most popular mech mods out there right now and you will not be disappointed in it once you give it a good cleaning with some isopropyl alcohol. I will never give mine away because I love it too much. The 510 pin is adjustable so you will be able to get a good atomizer to top cap flush look (no gap) but since the IGO-W is not the same width as the Nemesis, there will be a little overhang on the sides from the mod itself.
Last edited:
Yeah I see what you mean when you said it doesn't sit "flush", but I have to admit I love the way it looks. All that silver just looks incredible
Yeah, I think it looks pretty sharp. And with the brushed SS drip tip it looks clean.. from bottom to top brushed button, stainless locking ring, brushed body, stainless top ring and igoW then the brushed tip on top in the same basic sphere shape. Looks like it was all just meant to be there.
Brother has a fast tech one. the switch and lock ring are terrible IMO. the firing pin unscrews while you use it and you have to tighten it alot. besides that, it looks nice, alot of Attys look great on it, it hits hard.
i have a hcigar clone, love it! i havent needed to do the magnet upgrade, my switch works just fine
I have the hcigar clone. And lost a switch pin but once I got magnets the pin stays solid in the switch.
My hcigar kayfun 3.1 sits perfect on the nemesis.
Silver plated contacts work great.
The adjustability for the atty to sit flush is great.
It's def worth adding to the collection
My hcigar kayfun 3.1 sits perfect on the nemesis.
Silver plated contacts work great.
The adjustability for the atty to sit flush is great.
It's def worth adding to the collection
Just ordered a Nemesis clone. I plan on sub ohm vaping but unsure what batteries or charger to buy? So far these (FATDADDYVAPES - Pair of MNKE IMR 18650 30A/60A Batteries for Mechanical Mods) off ebay caught my attention.
MNKEs are good high amp limit batteries, but not the only ones. Sony, Efest, and some others all make 30+ amp limit batteries also. It really depends on the mAh you want for battery life, and your budget. As for chargers, a good 2 channel or 4 channel charger is best. I myself have both an i2 and an i4 Nitecore Intellicharger, and they're great.
i have a hcigar clone, love it! i havent needed to do the magnet upgrade, my switch works just fine
I haven't had any of the problens with the switch or firing pin either. It's worked like a champ without the magnets
Little tip for you guys waiting on your Nemmy clones, make sure you remove the small chrome 3mm kick ring as well as the 15mm kick ring, sometimes it's a real beetch to get off, i had to drown mine in WD40 and stick it in the freezer for a couple of hours to loosen it.
I purchased a Nemesis clone about a month ago, and liked it so much I ordered 4 additional ones that I just received at the end of last week. They are all topped with Kayfun or Nano tanks.
- Status
Similar threads
- Locked
