Got my DX magnets today. Kicked 350 mode with a R91 on top. Used 3 magnets and I can set it down without a problem. Smooth action and it feels like it shortened the throw some. Would like to try 2 magnets with a spacer to see how that feels.
Nemmy Magnets
- Thread starter Heavyrocker
- Start date
- th_trl_thread_readers 0
- Status
Did a little searching on other forums and through comments on various blogs and it looks like the magnets below will also work. The guys that used them on both clones and authentic nemesis mods said they fit perfectly. The only issues noted were those using a safety fuse but other than that, they fit and work fine.
19mm x 14mm x 1mm neodymium ring
May be worth checking out. The guy is in the UK, so that may bypass some of the delays that normal china distributors have (both getting a shipment out and updates).
I'll probably order a few in the next week, so if no-one else orders before I do, I'll update with order processing times, shipping times etc.
19mm x 14mm x 1mm neodymium ring
May be worth checking out. The guy is in the UK, so that may bypass some of the delays that normal china distributors have (both getting a shipment out and updates).
I'll probably order a few in the next week, so if no-one else orders before I do, I'll update with order processing times, shipping times etc.
Follow-Up - no luck registering on the site. It timed out for me. May be a one-time thing, but he also sells on eBay and has 71,606 feedback and a 100% rating, so should be good to go.
You can buy 10 for a little over $11 USD or just 2 for $3.16 (conversion as of this post).
For 10:
10 Neodymium ring magnets 19mm outer dia x 14mm inner dia x 1mm N35 fridge craft | eBay
For 2:
2 Neodymium ring magnets 19mm outer dia x 14mm inner dia x 1mm N35 fridge craft | eBay
You can buy 10 for a little over $11 USD or just 2 for $3.16 (conversion as of this post).
For 10:
10 Neodymium ring magnets 19mm outer dia x 14mm inner dia x 1mm N35 fridge craft | eBay
For 2:
2 Neodymium ring magnets 19mm outer dia x 14mm inner dia x 1mm N35 fridge craft | eBay
I had a chance to play with my setup. I use 2 magnets and a plastic spacer under the bottom magnet that I cut out of the cap of a water bottle (hey, it's a step above pieces of duct tape, right?). I have the SS model with a V5 Nimbus clone on top in 18650 mode and there is no sag when I set it down and the action is just right for me. I'm not worried at all that it will fire when I set it down.
I have a couple of bigger rebuildable tanks coming so I'll have to see how it handles the extra weight, but for now I'm very pleased.
This might help people who have questions about installation.
http://m.youtube.com/watch?v=iI0dvGnuMto&desktop_uri=/watch?v=iI0dvGnuMto
http://m.youtube.com/watch?v=iI0dvGnuMto&desktop_uri=/watch?v=iI0dvGnuMto
I'm sure this is a dumb question, but what exactly is the function of that little pin?
So did I but my magnets seem to slide over and make my button lock up before the bottom pin makes contact with the battery. Now I just use the crappy spring that came with it
You may want to measure the body at the switch threads.(Inner diameter) Would suck if the magnets strike the tube and stop the switch from screwing in properly.
I am using the DX magnets and they work great. I put a thin silicone spacer underneath the magnet on the switch (i took it off a kanger t3s base) and the throw lost the bit of wobble it still had. My nemmy clone's switch is perfect now. They are also strong enough to hold up my mod in 18650 with any atomizer I own. I think the heaviest one I have is the rocket. Took 3 weeks to my door but you can't beat the price really.
Has anyone figured out what the brass spring is for? I tried keeping it the first time I installed my magnets but it didn't work. Removed it the second time and my nemesis seems to hit harder.
Dual valve springs are used in performance engines to reduce valve float and spring resonance while increasing spring rate.
I suspect dual nemy spring is to stabilize switch wobble while increasing spring rate enough to avoid auto fire w/ heavy RTA.
My stock nemy switch had wobble/binding from excessive clearance and was scratchy from machining marks; not ready for prime time.
got some dx on the way. probably gonna take forever but thanks for the cheap headsup.
Mine took about 3 1/2 weeks. On the plus side I've got extras in my gear box that I can use for other mods.
From what others who have used them said and have shown, they do work without any issues. I'm actually about to order a set just to see if it works. Once I get them in, I'll report back and let everyone know. The cost is slightly higher, but I know mail coming from the UK has a better chance of getting here on time whereas it could really take any amount to get them from china (just too many bad experiences).
I'll be testing them in my HCigar Nemesis Clone, so stay tuned.
Just ordered my dx magnets. Don't know why I waited so long, I must've had that page bookmarked for a couple months now. Ah, well. A few weeks from now and both my Nem clones will be fully magnetic! Also it'll be nice to have some spares.
dear lord, how long did it take you guys for DX to get the magnets to you? Ive been waiting over 3 weeks now. My tracking info has been stuck at "PVG NULL" for about 2 weeks.
Fatdaddyvapes Nemesis Magnetic Upgrade Atmomixani Specification | eBay
Increased Strength
Decreased Pricing
Correct size
Increased Strength
Decreased Pricing
Correct size
- Status
