NEW avs3 (UFS)

[VPDownunder]

I wait with great anticipation, you've really outdone yourself this time in giving us total external control of the atty I just need to dust off my collection of 510 atty's

 

[nikk4s]

I think my juice was piling up against the airholes, that's why I turn it so they point up and tilt almost level while I vape what's in the collector tank back down. I know it's just a viscosity issue, I may thin it down a little next batch. It really was only made for dripping.

 

[imeothanasis]

thanks a lot VPD my good friend

Nikk, I didnt understand well, sorry. Did you have an issue with UFS?

 

[nikk4s]

Imeo, you misunderstand. Dude is using a very thick consistency vg juice. I also am also using an extremely thick consistency juice up that I mixed for the purpose of dripping which I am using up in my UFS. I have no issue and was amazed that the UFS could work with a juice as thick as this. I would not have even tried with anything else that I have used in the past and it does very well. Your UFS is working way better than I really expected given that the liquid delivery system is the most troublesome part of the ecig. I fed it a juice that would stop any cartomizer up and it's devouring it. My only issue with the UFS is that there is no button to switch from irish creme to peanut butter cup to ry4. Seriously though, I have nothing but praise for this wonderful device. I have one more bottle of "dripping juice" to use up before I go back to my regular mixes now that I don't need it anymore. Dripping has been replaced with UFS except for testing.

 

[Caddyman]

true for me as well. i have a slim setup for dripping when trying new flavors and i use the ufs daily for regular vaping of my good flavors

 

[imeothanasis]

Ah, sorry Nikk, my english are ok when you write only in simple english
Thanks a lot buddy

 

[lordbyron77]

I'm using 15/20% of water and UFS works very well, better than traditional Flavour Art juice with 10% of water
All o-rings are fitted
I think that the best atoms for the UFS are SLB HV or VHV (4-5 ohms), and my favourite configuration is: 2 x LiFeP04 with 510 SLB@4ohm (HV)

 

[nikk4s]

Imeo, your English is a lot better than my Greek buddy. (none)


I have normally used 20-30% vg in my mixes, but will probably use 40% in my next batch to try. I think that will work wonderfully with no need to add water. I've been trying to decide which batt/atty combo to try next and believe I will follow B-Rad's path into 2*18350 and a 5ohm atty.

 

[imeothanasis]

My liquid is full VG and UFS is vaping normal Nikk. I dont think that there is liquid that cannot get vaped with UFS.

 

[Wuntek]

Im running 90% VG without any problems.

 

[nikk4s]

I assumed from what I had read on the forums that everyone thinned their vg mixes like what Lordbyron mentioned above or bought them from suppliers who sold a prediluted vg and that I would also need to do the same. I will keep playing with the air and liquid control instead of adjusting my juice. It is amazing how smooth and flavorful this is and how easy it was to make the switch to using this exclusively.

 

[thedudeabides]

Try Ikenvape LR or HV 510s on the UFS, you will not be disappointed...

 

[Moshmarr]

Try Ikenvape LR or HV 510s on the UFS, you will not be disappointed...

So true, these are the best 510's I've ever used..

 

[iggyLover]

Cisco 306 here with 510 sleeve rocks in the UFS! This is one truly satisfying device, thank you so much Imeo!

 

[imeothanasis]

Thank you very much Iggy

 

[hamdamann]

hey any word on when there will be any more in stock at clouds of vapor in the US im am dieing to get one

 

[imeothanasis]

I need 5 days to assemble UFS ham my friend. All the nesesary parts are here in my house.

 

[sonabraham]

Need help with UFS

I’ve had this device over 2 weeks. I’ve read every word on every forum I could find, many times. I have viewed every video dozens of times. I cannot make my UFS work consistently.

Good example:
I’m using 6 volts with standard 510 atomizer. Also, have liquid thinned out as far as I dare take it.
Yesterday I took the UFS apart. Cleaned every thing I could find to clean. I put Vaseline on all of the o-rings. Closed everything off and filled. Opened the air only and vaped out the control tank. Then I gradually opened the liquid about 1/8 turn at a time. It took some time but it got to the point that vaped like a dream. It stayed that way for about 3 hours and it never leaked. I went to bed leaving everything as it was. Even tried it in the middle of the night, still great. This morning it would not work. I closed the liquid and vaped off the control tank. It leaked. Never got a decent hit during that process. I sucked on it, blow into it. Did both. Changed batteries. Opened top. Then stared at it for awhile. Finally started opening liquid 1/8 turn at time. Played with the air. It won’t vape. Gurgles a little, and it leaks. It will not feed the atomizer. And I’m out of ideas.
Mostly I don’t understand how the control tank works. There must be either pressure or a vacuum created to feed the atty. I don’t have a clue. Also, I don’t understand the process that allows liquid into the control tank and how to control that process.
(Forgot, I removed the o-ring below the CR. Then replaced it, after I started thinning the liquid).

Please help

 

[imeothanasis]

Sobn , when you say that UFS leaks, what exactly you mean?

 

[sonabraham]

I believe its leaking out the air holes. I also think that this only happens when the collection tank is full.