NEW e-Pipe 18350 Mod From SMOktech - This is JUST Cool and JUST in time for Father's Day! Available NOW - VIDEO WITHIN

[dannoman]

SMOKtech e-Pipe 18350 Mechanical mod - Chrome
$49.95

Very cool new mod from SMOktech offers a very practical form factor and a unique, fun and stylish aesthetic - The e-Pipe 18350 mod. This sports a chrome-clad brass body with very smooth threading, a large thumb-friendly firing button and eGo well.

Please note that insertion of your 18350 IMR battery is counter-intuitive. It is easy to insert your battery in with the wrong polarity on this mod. Make sure the POSITIVE side of your battery is at the BATTERY CAP end - in other words insert your battery NEGATIVE end FIRST. If you install a carto and your unit begins to fire without pressing the fire button, take the battery out to make sure your polarity orientation is correct.

One of the nice features of the e-Pipe is that it is weighted nicely. When you place the mod down it won't accidentally tip over with its low center of gravity and solid wide base.

No arguing that this mod is just plain cool and definitely a head turner.

• 52mm high(2.0 inches); 24mm wide, not including the pipe extension (~1 inch)
• Mod only, no batteries included.

SMOKtech e-Pipe 18350 Mechanical Mod - Chrome [gv-SMOKe-PIPE-Chrome] - $49.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[yiddleboge6]

OMG!!! Am I really ready to turn into Mammy Yokum?

thank you Danno





For all you young uns.....google Lil Abner .....you'll even find out where Daisy Dukes originated

 

[dannoman]

Ok e-PIPE is now UP for sale...

 

[keelalagirl55]

OMG!!! Am I really ready to turn into Mammy Yokum?

thank you Danno





For all you young uns.....google Lil Abner .....you'll even find out where Daisy Dukes originated

OMG....I am I love this thing :hubb:

 

[rdsok]

It does have that corncob pipe look to it doesn't it... perhaps a corncob JWrap is in order...

 

[yiddleboge6]

It does have that corncob pipe look to it doesn't it... perhaps a corncob JWrap is in order...

OMG!!! I can soooooo visualize that

 

[devauto]

That is SOOOOOO cool, I wish I had $50 to spare right now!!!

 

[badkolo]

these are simply amazing lookiong

 

[Vaptor]

I really wanted one at first but than I realized it's got some major drawbacks. Can't kick it, no Ego connector and no tube cover for cartos included. That's not asking too much. So I've changed my mind about it till "maybe" the V2 comes out.

 

[keelalagirl55]

I really wanted one at first but than I realized it's got some major drawbacks. Can't kick it, no Ego connector and no tube cover for cartos included. That's not asking too much. So I've changed my mind about it till "maybe" the V2 comes out.

Well, it does have the well to allow the ego connections....not sure what you are referring to as far as the tube covers....and yea....no kickin it. I'd love to see one come out vv or vw without having to use a kick....but *sigh* have a feeling it will be a long long wait

 

[thebuffster]

Just got mine a few days ago and I love it. Got a Vape Only BCC for it and it works great Perfectly portable as opposed to my huge LavaTube V2 and the looks I get with it are priceless

 

[Sluggo]

Got mine today, and sadly, it autofires!
I use Efest 800mAH 18350 with nipple. And it sems like the nipple just fits inside the delrin(?) insolator at the button.
Is there any way to fix this?

Also, the battery fits (besides the autofire), but just barelly. The mod is almost too short. If you use any battery that's a little bit bigger (if there is any), it might not fit.
AND: It is NOT fully mechanical! -It's constructed like one, and it's a spring- loaded mechanical button, But there's a WIRE that connects it to the body.. -Why, Smoktech?!? WHY??

 

[Sluggo]

OK, my bad, didn't see the "battery wrong-end-in-first note". Didn't say that on the page where I bought it either.. -Again: WHY, Smoktech???
-If you don't know this when you get it (like me) and doesn't pay attention when it's assembled, it could get really bad, really fast! And for what? WHY design it this way??? -It's an unnecessary risk!! If they made the delrin hole just a little bit smaller, it would not autofire. -Horrible designwork IMO!

 

[yiddleboge6]

OK, my bad, didn't see the "battery wrong-end-in-first note". Didn't say that on the page where I bought it either.. -Again: WHY, Smoktech???
-If you don't know this when you get it (like me) and doesn't pay attention when it's assembled, it could get really bad, really fast! And for what? WHY design it this way??? -It's an unnecessary risk!! If they made the delrin hole just a little bit smaller, it would not autofire. -Horrible designwork IMO!

since you are saying this info was not on the page where you bought it....did you buy it from GotVapes? Here is a direct quote from the product page on GotVapes site....



"Please note that insertion of your 18350 IMR battery is counter-intuitive. It is easy to insert your battery in with the wrong polarity on this mod. Make sure the POSITIVE side of your battery is at the BATTERY CAP end - in other words insert your battery NEGATIVE end FIRST. If you install a carto and your unit begins to fire without pressing the fire button, take the battery out to make sure your polarity orientation is correct"

And here is a link to that page


SMOKtech e-Pipe 18350 Mechanical Mod - Chrome [gv-SMOKe-PIPE-Chrome] - $49.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more

 

[dannoman]

I have discovered that if you use a flat top battery you won't have this issue and you can insert the battery positive end first, like 'normal'. I have adjusted the product page to reflect this information.

 

[rdsok]

AND: It is NOT fully mechanical! -It's constructed like one, and it's a spring- loaded mechanical button, But there's a WIRE that connects it to the body.. -Why, Smoktech?!? WHY??

A wire isn't considered an electronic component ( though electronic components do contain them ).... So it still classifies as a mech mod. I'm not a big fan of using wires in them either... but the use of them doesn't change the technical description of it being a mechanical one...

I've sort of started calling them "sort of" mech mods because of my own dislike of using wires...

 

[Sluggo]

since you are saying this info was not on the page where you bought it....did you buy it from GotVapes? Here is a direct quote from the product page on GotVapes site....

No actually I didn't get it from GV.. -I found this thread through search and didn't realize it was a vendor-specific thread, Sorry about that!
I got mine from another vendor as a pre-order (usually not much info on those)

A wire isn't considered an electronic component ( though electronic components do contain them ).... So it still classifies as a mech mod. I'm not a big fan of using wires in them either... but the use of them doesn't change the technical description of it being a mechanical one...

I've sort of started calling them "sort of" mech mods because of my own dislike of using wires...

Yeah, I still get frustrated when I get a wired mech, even if it really doesn't make That much difference.
But I always expect a "fully" mechanical mod without any wires when I order a "mech".
I usually call these wired ones "semi-mechs", I refuse to call them full mechs.

 

[Vaptor]

If it's got proper gauge wire that's a good thing since it will act as a fuse. Anyway can someone confirm that these DO NOT fit an Evod?

 

[Jerms]

If it's got proper gauge wire that's a good thing since it will act as a fuse. Anyway can someone confirm that these DO NOT fit an Evod?

I can. No eGo threading, so will need a 510-eGo adaptor to use an eVod.

Sent from my LGL55C using Tapatalk 2

 

[Vaptor]

I can. No eGo threading, so will need a 510-eGo adaptor to use an eVod.

I wasn't sure if the skirting would fit using adapter but sounds good than. Thanks.