Could somone who has it post closeup pics of inside and outside? The net doesn't show any close enough to see finish/texture/quality. Thanks.
New eroll case: you can carry two erolls
- Thread starter joemikel
- Start date
- th_trl_thread_readers 0
-
- Tags
- litecigusa ovale
- Status
Just got mine in today. Meh not to impressed. I was hoping it would be able to carry extra tanks instead of an extra eroll, but they dont fit with the caps on
Looks like if I order I better up the nic! The only reason I wanted it was to avoid carrying the pcc and something else for the extra tanks or juice. With this I'd only be able to carry .8 ml...I'd run out by lunch.
Sent from my iPad using Tapatalk - now Free
Just got mine today. Also not that impressed. Adds a considerable amount of bulk and the door is kind of finaky, slides around a little. Meh
Sent from my HTC One using Tapatalk 4
Sent from my HTC One using Tapatalk 4
You can store two tanks with the caps on. Having the caps on prevents them from sliding around and they do stay in place.
I also tried 3 tanks without the caps but as you can see they don't fit.
Last edited:
Last edited:
Found this thread just after I order my case. Wish I would have known about the sale. Anyway, just got the black case Friday, in the mail, and at first I was unimpressed but I really dig how it works. I'm gonna try to put the tanks in the slot next to see how good it work.
I'm not sure where I found this link. Definitely somewhere on ECF. It's a holder for your tanks. Check it out. I think I may get one in the near future.
TANK PACK DESIGN Essential accessories for eRoll
I'm not sure where I found this link. Definitely somewhere on ECF. It's a holder for your tanks. Check it out. I think I may get one in the near future.
TANK PACK DESIGN Essential accessories for eRoll
Well for some reason on mine, even if I have 2 tanks in it, you would have to squeeze the case for it to completely close. Otherwise, it leaves a gap and it stays slightly opened.
Just got mine in today. Meh not to impressed. I was hoping it would be able to carry extra tanks instead of an extra eroll, but they dont fit with the caps on
There IS one way I've managed to get around this & still be able to get to carry two extra carts in this case. HOWEVER it means having to get/have 2 extra atties & attie 'cones/covers'. (Basically I land up rotating my atties-&-carts.) - Instead of placing just carts with caps in the slot (which are an ill-fitting tight-squeeze) I carry two ready filled fully assembled cart/attie/cone combos (which are basically two half-cigs', which are the same size as one full cig.) Then just swap out the whole 'half-cig' instead of just the carts.
At least I get some use out of this case, when I want to carry extra filled carts with me - so rather than a fully assembled cig -> 2 'half-assembled' cigs. - (& it's good to rotate ones atties anyway, so ... .)
It's just a 'work-around', so I can make use of the case. BUT it does works for me. (So thought I'd share it & hope it helps someone who got this case but is disillusioned with it due to the 'no-cart-fitting' problem.)
Last edited:
There IS one way I've managed to get around this & still be able to get to carry two extra carts in this case. HOWEVER it means having to get/have 2 extra atties & attie 'cones/covers'. (Basically I land up rotating my atties-&-carts.) - Instead of placing just carts with caps in the slot (which are an ill-fitting tight-squeeze) I carry two ready filled fully assembled cart/attie/cone combos (which are basically two half-cigs', which are the same size as one full cig.) Then just swap out the whole 'half-cig' instead of just the carts.
At least I get some use out of this case, when I want to carry extra filled carts with me - so rather than a fully assembled cig -> 2 'half-assembled' cigs. - (& it's good to rotate ones atties anyway, so ... .)
It's just a 'work-around', so I can make use of the case. BUT it does works for me. (So thought I'd share it & hope it helps someone who got this case but is disillusioned with it due to the 'no-cart-fitting' problem.)
Sounds brilliant! Could you post a pic?
Sent from my iPad using Tapatalk - now Free
There IS one way I've managed to get around this & still be able to get to carry two extra carts in this case. HOWEVER it means having to get/have 2 extra atties & attie 'cones/covers'. (Basically I land up rotating my atties-&-carts.) - Instead of placing just carts with caps in the slot (which are an ill-fitting tight-squeeze) I carry two ready filled fully assembled cart/attie/cone combos (which are basically two half-cigs', which are the same size as one full cig.) Then just swap out the whole 'half-cig' instead of just the carts.
At least I get some use out of this case, when I want to carry extra filled carts with me - so rather than a fully assembled cig -> 2 'half-assembled' cigs. - (& it's good to rotate ones atties anyway, so ... .)
It's just a 'work-around', so I can make use of the case. BUT it does works for me. (So thought I'd share it & hope it helps someone who got this case but is disillusioned with it due to the 'no-cart-fitting' problem.)
Wow I didnt even think about that. Thanks!!!!!!!!!!!!!!!!!!!!!!
Isn't that the way it was designed to be used? A kit comes with two batts/atties and I have no idea why they didn't include another cone but I just purchased an extra to have two fully assembled ecigs. The extra slot in this new case is for carrying and additional fully assembled one as they heard the complaints from those who wanted a storage spot in the case... one charging and one ready to go.
I don't worry about it anymore though as I carry at least 8 fully assembled ones in a swiss-army-type case and don't even need the PCC when away from home for a day. I just make sure I order at least one batt a month along with my juice and they add up. I used to carry a pack of smokes. Now I carry a pack of erolls.
I don't worry about it anymore though as I carry at least 8 fully assembled ones in a swiss-army-type case and don't even need the PCC when away from home for a day. I just make sure I order at least one batt a month along with my juice and they add up. I used to carry a pack of smokes. Now I carry a pack of erolls.
How do you keep track of which are unused, which are flat and which is your current one?
I much prefer carrying my Eroll in the pcc. Lasts me all day no problem and I just put the pcc on the charger before I go to bed. Whole reason I got it was because I don't want to carry a bunch of batteries with me all day
Post #9 on this thread: http://www.e-cigarette-forum.com/fo...61839-dropped-sink-full-dishwater-dishes.html
shows one of my cases. I only had 7 in it when I took the picture but it will actually hold 8 under the flap and three on the back. Its just a matter of arrangement knowing which ones are spent and which are not. I only carry two flavors when out and about... tobacco and menthol and the color of the batts or tanks tell me which is which... then its just a matter of placement. The additional thing I like about carrying them this way is that should I get a leak its enclosed. I've also carried a tin Altoids box that serves the same purpose but like my fabric on for size better.
Yay my eRoll PCC cases have arrived from Joyetech UK! I got one white for my current white eRoll and one black for my new black eRoll which I also bought.
Who else has one? How do you like it?
Who else has one? How do you like it?
- Status
Similar threads
