New Genesis Line by Van - Line LE

[shpaolin]

Line LE (Lemon Edition) last prototype in the pictures (production just started).
There will be some additional changes in design. It can be completely disassembled by anyone if needed.
if everything goes as planed we will have them in stock in 30 days at VVAPEHOUSE

Estimated price (promotional for the first batch) : 90 USD - 65 Euro - 53.5 GBP

510 SS Connector (part of the SS body)
M2 SS screws
Itegrated isolation (delrin)
Holding capacity: around 2.2ml
Diameter: 14mm
Lenght: 55mm
Material: Stainless steel and full plexi
The wick hole 3 mm
Air hole 1 mm or 2x1mm (optional)

full plexi tube inside the SS body 10mm ID, 12mm OD.



 

[shpaolin]

Threads.

 

[shpaolin]

 

[shpaolin]

I will try to get my hands on more mods and take a picture with every mod i can find.

On my modded Ego , 4V fixed voltage and Omron switch. Perfect.

 

[shpaolin]

Line LE prototype - last drop of liquid. I tried to hold a "natural" vaping position.

http://youtu.be/AnB1lj_E4rs

 

[brickfollett]

Impressive! May lead to some fried ego batteries because of shorting though. Hope the ego dudes have multimeters for this one!

 

[shpaolin]

Ha ha ha , i lost few Ego batteries with a first Line. Since everything is isolated on LE you should be able to calculate your resistance by number of wraps.

 

[shpaolin]

Wicking problem? What's that? Ha ha ha. Line LE prototype wicking action.

https://www.youtube.com/watch?v=9jDa7Vw-rNs&feature=youtu.be

 

[shpaolin]

Few videos i did , just so you can see what to expect , and price is confirmed at 65 Euros which is more than fair i think. We hope that it will make the same impact as the first Line.

https://www.youtube.com/watch?v=bpBGISCd1h0&list=UUwVx4Dvtfpys947qRF8GX9g

https://www.youtube.com/watch?v=9jDa7Vw-rNs&list=UUwVx4Dvtfpys947qRF8GX9g

https://www.youtube.com/watch?v=AnB1lj_E4rs&list=UUwVx4Dvtfpys947qRF8GX9g

 

[shpaolin]

Almost ready , few days untill they are available in our shop. So few words about it and few pics of my unit that is not engraved , official pictures in few days.

Line LE , final product. Finally. First few words about Line LE , LE is inspired by our friend Lemon who destroys everything he gets his hands on. It is only 14mm wide middle mesh genesis atomizer , it is the Line build the way it deserves to be build. No weak spots on it and everything is user replaceable. Main advantage of LE is the easy to make setup and small top cap wich increases the flavor and gives thicker vapor. Sexy look helps also. Another talking point is price , price is cut down to the limit , initial price was to be set at 90 Euros but first Line mission was to bring more people to genesis atomizers with low price so we decided to do the same with this one. So at 65 Euros it is one of the cheapest original design , modders made atty out there. It is not cheep cause we tried to build a cheap atty , we did use same food grade SS as on SFox , we used PEEK for insulators and it is made with high precision with no sharp edges on it. A lot of time and testing went into this one as people who follow Van work know. It will be available in machined finish and mirror polished finish. It has 2ml capacity tank with zero wicking issues , check our videos to see how easy it is to use. After almost 4 years we decided to do the Line again and bring back to the market one of the first high end genesis atomizers. I will update you on the progress , but it shoud be only few days to relese date of Line LE. My unit has no engraving on it so that will be a little suprisse for the relese date. We made enough units for everybody and if needed we will make more. Better pictures and reviews will come soon. And once again , thanks for all the support for last 4 years boys and girls , vape on.

 

[northhar]

This is really nice.. and with the insulated wick hole it will be really easy to build.. Flavor, vaper and easy to build this one will be really good..

 

[shpaolin]

Mirror Mirror on the Wall, Who's the Fairest of Them All???

 

[shpaolin]

Machined finish Line LE.

 

[Alžběta Madragana]

Almost ready , few days untill they are available in our shop. So few words about it and few pics of my unit that is not engraved , official pictures in few days.

Line LE , final product. Finally. First few words about Line LE , LE is inspired by our friend Lemon who destroys everything he gets his hands on. It is only 14mm wide middle mesh genesis atomizer , it is the Line build the way it deserves to be build. No weak spots on it and everything is user replaceable. Main advantage of LE is the easy to make setup and small top cap wich increases the flavor and gives thicker vapor. Sexy look helps also. Another talking point is price , price is cut down to the limit , initial price was to be set at 90 Euros but first Line mission was to bring more people to genesis atomizers with low price so we decided to do the same with this one. So at 65 Euros it is one of the cheapest original design , modders made atty out there. It is not cheep cause we tried to build a cheap atty , we did use same food grade SS as on SFox , we used PEEK for insulators and it is made with high precision with no sharp edges on it. A lot of time and testing went into this one as people who follow Van work know. It will be available in machined finish and mirror polished finish. It has 2ml capacity tank with zero wicking issues , check our videos to see how easy it is to use. After almost 4 years we decided to do the Line again and bring back to the market one of the first high end genesis atomizers. I will update you on the progress , but it shoud be only few days to relese date of Line LE. My unit has no engraving on it so that will be a little suprisse for the relese date. We made enough units for everybody and if needed we will make more. Better pictures and reviews will come soon. And once again , thanks for all the support for last 4 years boys and girls , vape on.

Very nice looking Line! Ummmm.... who's the cute little gnome???

 

[shpaolin]

I don't know , found it on my girlfriend keychain.

 

[shpaolin]

In stock on saturday 26.07.2014 at 20.00 CET.

ATOMIZERS

Line LE machined finish - 65 Euro
Line LE mirror polish finish - 70 Euro


Line LE by Van

510 SS Connector (part of the SS body)
M2 SS screws
Itegrated isolation (PEEK)
Holding capacity: around 2ml-2.2ml
Diameter: 14mm
Lenght: 55mm
Material: Stainless steel and full plexiglass
The wick hole 3 mm
Air hole 1.2mm

full plexiglass tube inside the SS body 10mm ID, 12mm OD.

 

[Alžběta Madragana]

Awesome! Have you put some vids on Youtube of you vaping this thing???

 

[shpaolin]

Nope , waiting on Todd to do a review. I did a setup and wicking video.

 

[shpaolin]

 

[shpaolin]

Available in our shop in 2 hours , shipping is 4 Euros flat , worldwide. ATOMIZERS