New Joyetech 20watt eGrip

[Dimplegirl]

I have to agree, the eGrip has a really good mouth to lung hit that I can't seem to get from most of my other setups. Well, I love my Kayfuns and all but yea, there is just something smooth and satisfying about a good hit from the eGrip. Since I just ordered a cherry red CL version, this would be my third one. After my first one started going wonky, I liked the device so much that I got a second one. Once the second one wasn't really doing what I wanted it to do, my first one started working again and I just kept on using it. I doubt I'd get a fourth one if this new one screws up somehow... hopefully it doesn't have to go that route.

I've recommended the eGrip to a few friends and they all love theirs. It seems to be the device that appeals to them more than any of other setups, probably because it's just a nice, small, sleek mod with a great form factor and all in 1. My order from 3FVape shipped the day I ordered and is currently en route to the US, so I have high hopes that the shipping will be much faster than fasttech for something thats shipping from China.

I've also read in multiple random threads around the internet that the CLR heads DO work on the CL base. Can't wait to get mine!

@Kyi , once you get the CL base please come back and post how you like the CL atomizers and if the CLR works in it. Also if the CLR works in it, a comparison between the CLR and the RBA would be awesome to hear. Not sure if you have the RBA but if you do it would be great to know

Enjoy, I LOVE my eGrips... I have 3 - 1 v1 and 2 OLED, using all 3 daily with my 3 favorite flavors! Using the RBA in all 3.

 

[Kyi]

I do have a RBA but I honestly haven't really used it since I got it. My reason being that I found it easier to stick in one of the Eleaf GS Air or Aspire BVC coils and was too lazy to mess with the RBA. Also because the first time I made a coil on it, I got massive leaking and I didn't like that I couldn't use the airflow controller with it and the draw was too airy for my liking. But I will be trying the CLR coils for sure!

 

[vjdossey]

Thought should let you know I'm using the rba deck.
Maybe needs a new wick?
Hmm

Sent from my Passport using Tapatalk

Check your deck. I know with version 1 a few people found the plating was chipping or flaking off...

 

[Dimplegirl]

I do have a RBA but I honestly haven't really used it since I got it. My reason being that I found it easier to stick in one of the Eleaf GS Air or Aspire BVC coils and was too lazy to mess with the RBA. Also because the first time I made a coil on it, I got massive leaking and I didn't like that I couldn't use the airflow controller with it and the draw was too airy for my liking. But I will be trying the CLR coils for sure!

Thanks Kyi, looking forward to hearing about the CLR! I buy my coils for the RBA so all I need to do is wick them. I don't like that the RBA leak or drip randomly.

 

[Junny89]

When will the cl base alone be out anyone know?

Thanks I'll check my rba base and check as still get metallic flavour!

Sent from my Passport using Tapatalk

 

[jav74]

I buy alone cl base

 

[jav74]

Now i pimp my new oled red to 30w put cl base and cl 1.0ohm taste is bad.
It couldnt fit silicone on clr

It is look like this

Now i will try cs base with gs air pure cotton eleaf atomizer...finally good taste

 

[RooN]

I got mine too. Big disappointment, with cl and clr (you can get the silicon cover to fit by turning around a bit). NO AIRFLOW! When used after the RBA, it is such a tight draw.

 

[jav74]

I dont like rba base,now i dont like cl base...only good for me is gs air eleaf

 

[Kyi]

Soo... the CLR doesn't fit? Or the draw is super tight? Did you get the original CS OLED and a CL base to go with it or did you get the CL OLED that came with the base? How tight exactly is the airflow? Mine is still somewhere between China and the US so it'll be a while before I get it. I will try to find the posts where people said the CLR worked with their eGrip. I just don't want to end up with a bunch of coils I can't use. I do have an Ego One so I can still use it for that but I was hoping for a better vape experience using the Ego One CL or CLR coils.

 

[jav74]

It works great ,today i try.on 10w taste th are great

CLR works on egrip oled 20 w ...mine is cs and buy cl base separatly


Sent from my iPhone using Tapatalk

 

[gt_1955]

So just to clarify, the CL base works fine in the OLED, but not in the earlier version? And that is due to lack of air flow? BTW, for me the RBA base has too much airflow.

 

[jav74]

Yes,cl base i try on egrip v1-not work because it is only 1ohm.on oled 20w works without pimp to 30w.and CL base not have big airflow like rba base.and CLR ego one heads works

Now i must test is it CLR heads leaking...for now nothing...

 

[gt_1955]

jav, it didn't work only because it was a 1ohm coil? Did you try a rewind to a higher resistance, or just didn't bother?

ETA: I have a recoiled CS (a single, horizontal coil at 1.2 ohms) running in my V1 eGrip

 

[jav74]

I try on old egrip eleaf gs air 1,2ohm -not work,only 1,6ohm work.on new egrip work low resistance

 

[gt_1955]

eLeaf GS coils are a bit finicky on whether they work in the eGrip or not. I had one in (a 1.5 ohm) which didn't work, tried another and it did. The RBA manual says not to coil it below 1.2 ohms, so a 1.2 should work (well, it does because that's what I have in mine).

Thank you for your info

 

[jav74]

I dont like ego one heads in ego one atomizer but in egrip works great,i am so happy[emoji3][emoji3][emoji3]

 

[gt_1955]

I dont like ego one heads in ego one atomizer but in egrip works great,i am so happy[emoji3][emoji3][emoji3]

I would like to try it, just can't buy them in Australia, or for that matter the 1.2 ohm eLeaf organic cotton coils.

 

[jav74]

CLR no leaking yeah!

 

[Kyi]

Sweet! This is good news for eGrip owners. Do the CL and CLR coils taste the same? I've liked the GS air coils, thought they hit well and also liked the Aspire BVC too. Now there's organic cotton versions of them and I'm not going to buy several different coil heads so I'll probably just stick to what seems most long lasting and versatile. And the CLR seems to be the one.

Dangit, wish my eGrip would hurry up!