New kayfun issue

[FAAmecanic]

Ok...so I just got my kayfun clone from angel cigs. Built a coil on it and it was measuring .1 ohm (10 wrap micro with 28 ga wire..should be around 1.6ohm). No part of the coil was touching where it shouldn't

So I took the coil out and measured resistance with my ohm meter between the two capture scews.... .1 ohm. So I also measured between the center pin and the body. Again. .1 ohm.

So I'm thinking the clone has an internal short somewhere. Am I thinking right?

Sent from my SCH-I545 using Tapatalk

 

[FAAmecanic]

Darn it...meant to post this in atty forums but Tapatalk had a different idea. Sorry.

Sent from my SCH-I545 using Tapatalk

 

[classwife]

Moved to Rebuildable Atomizer Systems

 

[FAAmecanic]

Thanks classwife

And update...took the atty completly apart...to include the pin inside the base and block with the positive screw. Reset all insulators, and now its rockin at 1.1 ohms.

So just in case someone else has this same issue with a clone...solution posted thank god its Friday

Sent from my GT-N5110 using Tapatalk

 

[Necrotic]

I had the same problem. Unscrew the 510 pin at the base just slightly. That fixed mine.

 

[FAAmecanic]

Tried that first necrotic...I think it was the insulator under the positive block that wasnt seated right. The block was overlapping the insulator by at least halfway.

Eithet way solution if you show a short in your kayfun with no coil attached is to loosen the 510 screw, loosen the airflow screw if you have a 3.1, and if that dont work take it all apart and reseat all insulators to make sure they are in right.

Sent from my GT-N5110 using Tapatalk

 

[Necrotic]

Did you get the 3.1 or the lite? I got my 3.1 from angelcigs as well

 

[liquidator]

Yep, just sent mine back, tried removing the screw and it made no difference, now received an original that works fine, shall not be ordering any of that rubbish again.

 

[FAAmecanic]

It was the 3.1 es. Working great now.

Quality as always from the clone market is hit or miss. But what this clone has enticed me to do is go buy a authentic svoemesto. I figure if the clone works this good, the real deal is worth the money.

Sent from my GT-N5110 using Tapatalk