[NEW] Maelstrom Series Premium Atomizers - The Latest in Atomizer Technology
- Thread starter AcesFull
- Start date
- th_trl_thread_readers 0
- Status
These are for dripping only, you cannot use a cartridge with these as it will not wick liquid to the coil fast enough.
I need help. I have a lux 900 mah rig and can't find any pleasure in direct drip. I use the 510 atty low res. and can't seem to get zip. #2. is the 306 compat. with 510 thread? Seems like I need a bigger bridge for dd. Thanks
Yes, a 306 atty is compatiable with 510 threading. (You will need a 306 drip tip instead of the 510)
On that same note... I just got my 2 new 1.5Ω 306 atty's and they ROCK on a mini reo. Little too hot for my tastes on the woodvil and grand though...
love these maelstrom attys.
Both have the same threads so it's really your call. Some love 306's, the one LR I have had I am not so enamored with compared to my many 510s of various ohms but again I had only one. Haven't tried these yet either; I'll probably get one of each when I do. 306s cant use a 510 drip tip either, by the way.
Just wanted to let you know I'm inpressed.The 306s are super.Still has a good hit and draw after 3 days of 6-10 ml per day.The 306s I had befor after 2-3 days start to get a hard draw I hate that.These are great.Will be back for more.
They are in Florida for the vape event. I'm sure Monday or Tuesday you'll get an answer...
Well, just read the whole thread and I haven't found this answer yet.
Do these attys have the NASTY @$$ primer on them? This makes or breaks my purchase!
Do these attys have the NASTY @$$ primer on them? This makes or breaks my purchase!
Hey Ace,
Since the LR 306 is out of stock I put some in my "wish list". Does this mean that when you get restocked I can still use the MAL2550 discount code? Also, when do you expect to get them in?
Thanks for your time and the discount. I too would like to find a quality LR 306 at a reasonable price.
Al
Since the LR 306 is out of stock I put some in my "wish list". Does this mean that when you get restocked I can still use the MAL2550 discount code? Also, when do you expect to get them in?
Thanks for your time and the discount. I too would like to find a quality LR 306 at a reasonable price.
Al
Levi, the 2 306's I bought either had so little primmer in them that none came out when I blew through them onto a napkin and couldn't taste it when I first started vaping them, or they were "dry". Maybe someone else will chime in that tried some out too....
Good evening everyone. We are finally back from VapeStock and will be replying to all questions in the next day or 2.
To address the primer question, There is NO primer fluid on these at all.
To address the primer question, There is NO primer fluid on these at all.
Just to make a quick note. I pm'ed AcesFull the day they left and made sure it was not going to offend him if I posted my thoughts on these maelstrom 306 atty's in comparrison with some other vendors. This is what I thought of them the day I received them after a few hours of use...
I am pleased so far with the Maelstrom 306 1.5Ω atty's. I purchased 2 to test out. Both tested right on the money as far as resistance spec's go. I had none of the "fitting issues" with the REOS mods desrcibed by other's that they had with the 510 versions. As always, first thing I did was to dewick the atty's. I did not de-bridge, or remove the wick from the coil. I primmed both in my normal 8 drops/10 minutes wait, then 3 more drops, and vape routine. First thoughts... They are very smoothe, no harsh after taste like other's experienced with the 510's. This issue may have been resolved already? They are a tad bit "too hot" for the Woodvil and Grand for my tastes, but perfect on my mini reo. Of course, neither is anywhere near being "broken in" yet so my opinion is subject to change. I did shatter one of my pyrex glass drip tips trying to get it more than a 1/3rd of the way on.. My el-cheapo derlin 306 long tips fit them like a glove though...Durrability will be noted at a later date... So far I like'em far better than 306 joye lr's, more flavor came through with the Maelstrom, IMHO. I'm undecided at this juncture which 306 1.5Ω atty I like more, the cisco's or the Maelstrom's. As for a "new kid" (or atty in this case) on the block, thats saying a HELL of a lot in my honest opinion! 2 be continued...
Here's what I think now 8 days of use later.... I'm VERY pleased with them still. The flavor is warm and very smoothe with a sweet juice. Th is, as would be expected, minimal with a sweet flavor... BUT vapor production is impressive with 70pg/30vg BWB Waffle juice. It took a full days worth of use for these to get "broke in". The flavor improved, and vapor production improved after about 3-5ml of juice through them. If these keep on lasting and performing like these 2 are, I'll be a happy camper. I will add any major changes that occur later on down the road.
My 2cents are this, glad I took the chance on a new atty. Was definitley a surprise, since I expected nothing more than a rebranded joye. It sure beats them in my book...
I am pleased so far with the Maelstrom 306 1.5Ω atty's. I purchased 2 to test out. Both tested right on the money as far as resistance spec's go. I had none of the "fitting issues" with the REOS mods desrcibed by other's that they had with the 510 versions. As always, first thing I did was to dewick the atty's. I did not de-bridge, or remove the wick from the coil. I primmed both in my normal 8 drops/10 minutes wait, then 3 more drops, and vape routine. First thoughts... They are very smoothe, no harsh after taste like other's experienced with the 510's. This issue may have been resolved already? They are a tad bit "too hot" for the Woodvil and Grand for my tastes, but perfect on my mini reo. Of course, neither is anywhere near being "broken in" yet so my opinion is subject to change. I did shatter one of my pyrex glass drip tips trying to get it more than a 1/3rd of the way on.. My el-cheapo derlin 306 long tips fit them like a glove though...Durrability will be noted at a later date... So far I like'em far better than 306 joye lr's, more flavor came through with the Maelstrom, IMHO. I'm undecided at this juncture which 306 1.5Ω atty I like more, the cisco's or the Maelstrom's. As for a "new kid" (or atty in this case) on the block, thats saying a HELL of a lot in my honest opinion! 2 be continued...
Here's what I think now 8 days of use later.... I'm VERY pleased with them still. The flavor is warm and very smoothe with a sweet juice. Th is, as would be expected, minimal with a sweet flavor... BUT vapor production is impressive with 70pg/30vg BWB Waffle juice. It took a full days worth of use for these to get "broke in". The flavor improved, and vapor production improved after about 3-5ml of juice through them. If these keep on lasting and performing like these 2 are, I'll be a happy camper. I will add any major changes that occur later on down the road.
My 2cents are this, glad I took the chance on a new atty. Was definitley a surprise, since I expected nothing more than a rebranded joye. It sure beats them in my book...
Last edited:
If I hadn't gone nuts in May when I finally really got into this and bought a bunch of diff attys (and have yet to have even one die on me) I definitely would have bought a couple of these already.
Just to make a quick note. I pm'ed AcesFull the day they left and made sure it was not going to offend him if I posted my thoughts on these maelstrom 306 atty's in comparrison with some other vendors. This is what I thought of them the day I received them after a few hours of use...
I am pleased so far with the Maelstrom 306 1.5Ω atty's. I purchased 2 to test out. Both tested right on the money as far as resistance spec's go. I had none of the "fitting issues" with the REOS mods desrcibed by other's that they had with the 510 versions. As always, first thing I did was to dewick the atty's. I did not de-bridge, or remove the wick from the coil. I primmed both in my normal 8 drops/10 minutes wait, then 3 more drops, and vape routine. First thoughts... They are very smoothe, no harsh after taste like other's experienced with the 510's. This issue may have been resolved already? They are a tad bit "too hot" for the Woodvil and Grand for my tastes, but perfect on my mini reo. Of course, neither is anywhere near being "broken in" yet so my opinion is subject to change. I did shatter one of my pyrex glass drip tips trying to get it more than a 1/3rd of the way on.. My el-cheapo derlin 306 long tips fit them like a glove though...Durrability will be noted at a later date... So far I like'em far better than 306 joye lr's, more flavor came through with the Maelstrom, IMHO. I'm undecided at this juncture which 306 1.5Ω atty I like more, the cisco's or the Maelstrom's. As for a "new kid" (or atty in this case) on the block, thats saying a HELL of a lot in my honest opinion! 2 be continued...
Here's what I think now 8 days of use later.... I'm VERY pleased with them still. The flavor is warm and very smoothe with a sweet juice. Th is, as would be expected, minimal with a sweet flavor... BUT vapor production is impressive with 70pg/30vg BWB Waffle juice. It took a full days worth of use for these to get "broke in". The flavor improved, and vapor production improved after about 3-5ml of juice through them. If these keep on lasting and performing like these 2 are, I'll be a happy camper. I will add any major changes that occur later on down the road.
My 2cents are this, glad I took the chance on a new atty. Was definitley a surprise, since I expected nothing more than a rebranded joye. It sure beats them in my book...
Hey Mvgratz, hope all is well with you.
I have a question for you if you don't mind. I like the Cisco 306 LR 1.5 on my Woodvil and have been wanting to try these Maelstrom 306 LR 1.5's on it. You wrote that they are a tad bit hot on the Grand and Woodvil so I was wondering how they compare "heat wise" to the Cisco. Are they about the same or different?
Thanks for all your input throughout the forum.
Al
Al, I completely missed seeing this question till now. To me, the heat/th created by both the cisco 1.5Ω and the maelstrom 1.5Ω were pretty even. Biggest difference was the airflow. To me, the cisco's are a tad bit "tighter draw", which may be a plus or a negative depending on your tastes. Mine are going on day 18 of daily use. Still hitting great. I've been vaping 70vg30pg bwb Malty Toffee with one of them... Huge clouds of vapor!
Now, we just need them to be restocked!
- Status
Similar threads
- Locked
- Locked
