Thanks Eric. I grabbed a couple of the 1/8th but might want to try the 3/32 later. Will you be stocking these again when you run out?
Ceramic Wicks are here for those interested
I am packing these in spare CE5 tubes I have so they do not get damaged in shipping. You can order a max of two sets.
If you order two sets all 6 pieces will be in the same tube.
3/32 size:
From what I have been able to summize this one will fit every rebuildable atomizer I sell currently. If you have purchased a rebuildable that can utilize mesh from DiscountVapers, this one will fit.
Please do not email me asking if this will fit, check the hole on your rebuildable if it is 3/32 or larger it will fit
These do not fit the drippers like the Phoenix, I am sure someone can figure it out but they are not specifically made for this.
1/8 size:
This size does not seem to fit any product I have it is too thick, if you have purchased a rebuildable from me, this will NOT fit, you need the smaller size 3/32. Please measure the hole you have to make sure this will fit your device, if your hole is smaller than 1/8th it will not fit. Please do not message me asking if it will fit what you have, if it is not from my store I will not know
My disclaimer for this item:
This product is fragile and cannot handle sheer forces, makes sure you handle this with care. Due to the nature of this product there are no refunds or exchanges.
This includes breakage in shipping, it is far too easy for someone to break one and tell me it came to them broken, if you are not willing to take the risk, do not buy this item.
We are shipping these in CE4/CE5 clearomizer tubes that we have extra of and wrapping them in bubble, in the entire time I have sold vape gear I have had one tube break in shipping because a postal worker decide to stomp on it. I have had a fair amount "crack" but only one outright break. This is the best option I have right now, I am going to try to get some small tube bottles for the future. I am saying this ahead of time, sending me a picture of a broken tube will not be proof they were broken in shipping, I am doing my best to make sure they are shipped properly. You all know me, you know I am fair, but in this case.. this is too new and they are too few in supply.
I wrapped one up, threw it around, dropped a box on it and did everything short of stomp on the package. They were still intact.
This policy may change in the near future as this item gains popularity and volume. For now consider this an experimental purchase.
Please report your experiences by leaving a review.
I will post more when I know more, I asked LD to investigate the sizes, but I need to move onto other things I am sure he has a boat load of things to do, but if I learn anymore I will post it. As of right now I am not sure what the 1/8ths will fit.
Thanks Eric. I grabbed a couple of the 1/8th but might want to try the 3/32 later. Will you be stocking these again when you run out?
Eric do you Know the diameter of the natural, is it 22mm and also if you have time could you check and see if an Aga T2 will screw flush all the way down with no gap. That would be great and I would really appreciate it , Thank you![]()
Go-go Twist is now here.
it is called the "Fury" at some other website, not sure why they picked that name, it has a twist dial.. it's a twist
This is made by Kanger the same manufacturer as the Go-go.
Note:.The Go-go and Go Carts are not backward compatible with any other products, you cannot screw on an eGo or 510 to this battery!.
Go-go.Twist variable voltage battery the latest variable voltage battery. Each battery has inner smart buck-boost converter, which can adjust voltage output from 3.2v ~ 4.8v by spinning the knob at the bottom. Each increment is 0.2v. The voltage output will not decrease until battery needs charging. Note the only voltage indicators on the bottom are 3.2, 4.0 and 4.8 but the dial can stop anywhere along the line for more or less voltage.
The battery voltage dial spins clockwise.
Go-go Tank clearomizer is here:
also called the Fury Tank at another website.
These are both the exact same item sold at the other website, made by Kanger.
In my initial impression this is better than any ce4 out there, so go to it go-go'ers
I got enough of both for my Go-go lovers.![]()
Eric do you Know the diameter of the natural, is it 22mm and also if you have time could you check and see if an Aga T2 will screw flush all the way down with no gap. That would be great and I would really appreciate it , Thank you![]()
22mm Diameter
107.44 Height when using the extension tube
The aga has a slight gap when screwed on.
Eric does the top cap screw off ? It might have a adjustable pin so there is no gap.
I dont think the connector is flush, probably raised for airflow, I'm sure it could be ground down.
Eric does the top cap screw off ? It might have a adjustable pin so there is no gap.
will you be carrying anymore dream tanks
Yes, hopefully a lot of different colors also if possible and some parts
Hey Eric, I just got my ceramic wicks today and they arrived safe and sound. Not 1 was broken. You did an excellent job of packaging them. Thank you.![]()