New Product Releases

[bmrdave]

Yeah, and its always about half way through a tank. I figured out how to fill it without flooding or leaking. Now I wants to do it half way through a tank. No harm no foul. I love trying new things! I just can't bring my self to drop $50.00 or more on a Pyrex tank.

Well what the heck!?! Now mine is doing the exact same thing! I was halfway through my last tank and the draw suddenly got hard. I look at the tank and there's tears of fluid coming out the vent slots. Blew it out. Draw is still a little bit hard though so I assume it's going to happen again. I must figure this out!

 

[magentaman]

Well what the heck!?! Now mine is doing the exact same thing! I was halfway through my last tank and the draw suddenly got hard. I look at the tank and there's tears of fluid coming out the vent slots. Blew it out. Draw is still a little bit hard though so I assume it's going to happen again. I must figure this out!

At least I am not nuts. Well I am but not for that reason! LOL

 

[tmcase]

I can't blame it on the weather, your not that far from me!

Yeah, I noticed that. We're practically neighbors when you think about how big this country is. You can blame the weather though. I do all the time. It's cloudy here all the time so you can blame low barometric pressure.

 

[tmcase]

Well what the heck!?! Now mine is doing the exact same thing! I was halfway through my last tank and the draw suddenly got hard. I look at the tank and there's tears of fluid coming out the vent slots. Blew it out. Draw is still a little bit hard though so I assume it's going to happen again. I must figure this out!

Gez, I hope this isn't contagious. Are you sure the adapter is screwed tight to the carto connector. Maybe it came loose.

 

[bmrdave]

At least I am not nuts. Well I am but not for that reason! LOL

Gez, I hope this isn't contagious. Are you sure the adapter is screwed tight to the carto connector. Maybe it came loose.

Everything is tight. It's I guess the sixth tankful on this carto. I may try going back to one hole on the next carto to see if that helps. I got into the habit of two holes a while back but I don't really think any of my juices need that.

 

[gormly]

Thanks Eric, were they the dark ones? Also any idea on price?

they were the ones I got three votes on. I think black sandlewood if I remember right?

 

[gormly]

Not sure what I am doing wrong. But I can't keep the AGR tanks from flooding and leaking. :-(

In my experience only...not an expert here..

You need to fill these with the cap ON, otherwise you get pressure and pressure is not always your friend with any kind of tank.
My two testers have not leaked a drop but I do remember when I was new to all this I would use the DCT tanks and fill them with the top cap off, once I popped the top on the liquid level would decrease about 25%.. all of that flooded the carto.

Now I use fill tools with the dct or with this one the fill hole and I let it sit for 30 minutes to let the liquid soak in instead of being pushed in

It is possible maybe this is the cause? Just pressure?

 

[Atlantisboy]

they were the ones I got three votes on. I think black sandlewood if I remember right?

Ok great Eric , so do you know how much they will be?

 

[gormly]

I haven't checked the PI but it will be discounted, I didn't get them just to make profit.
But they are limited to the people who asked for them.

I will PM the requestors when they come in

 

[Atlantisboy]

Awesome Eric that is very kind of you

 

[DancingHeretik]

Eric, have the gaskets come in for the AGA-T glass tanks?

I wanted to order a Natural, but wanted to wait and get the gaskets at the same time if possible. I hate to place an order for just a couple of gaskets!

 

[tmcase]

In my experience only...not an expert here..

You need to fill these with the cap ON, otherwise you get pressure and pressure is not always your friend with any kind of tank.
My two testers have not leaked a drop but I do remember when I was new to all this I would use the DCT tanks and fill them with the top cap off, once I popped the top on the liquid level would decrease about 25%.. all of that flooded the carto.

Now I use fill tools with the dct or with this one the fill hole and I let it sit for 30 minutes to let the liquid soak in instead of being pushed in

It is possible maybe this is the cause? Just pressure?

I fill my AGR with the top cap off. After I fill it put the top cap back on but don't screw it down until I have the bubble in the tank over the carto hole then I screw the top cap down. I've never had a leak doing it this way.

Sent from my T-Mobile G2 using Tapatalk 2

 

[-Mimi-]

I have only been vaping for 3 months but I think DV was the best kept secret from me lol I can't wait on you to get restocked from this crazy holiday they had. Someone might have to take my bank card away from me!! Awesome site and prices!!!

 

[Bizrad8381]

The way i fill all my carto tanks is push/pull the carto so the top or bottom is clear of the cap then remove the top or bottom cap, fill, replace the cap, then slide the carto back into position. This is with DCT's I'm not sure if this is possible with the AGR tanks so disregard if it isn't possible.

 

[Catharlex]

Trying to be patient for the porous ceramic wick... Missed out on the last batch. Really hoping to finally get my hands on it this time around.

 

[timothy]

Trying to be patient for the porous ceramic wick... Missed out on the last batch. Really hoping to finally get my hands on it this time around.

Me too .........

 

[gormly]

working on it, this coming order is triple the previous amounts. I will post here and in the tiamat thread when the pre-order is up (when I get tracking)

 

[timothy]

Thanks gormly

 

[gormly]

The wicks are available for Pre-order right now

expected to be delivered to me on Friday (I have tracking)
Coming Soon

This is s PRE-ORDER starting at 4PM 03/05/2013 and only contains all the sets I have coming in, the next pre-order will start soon after this set runs out.

This means you will be charged for this item now and it will ship when it comes in, it also means that anything else you put on the order will ship when the wicks come in. This pre-order is to help gauge reaction and stock requirements. I expect the wicks in Friday 03-08-2013 but it may be as late as Monday as they are being shipped by Fedex

 

[gormly]

MKB-TS Telescope Mechanical Mod

My most expensive item ever for sure...

The Tubes and parts are all stainless steel
The top and bottom caps are copper with gold plating (I am not certan if it is real gold plate but I doubt it)
The telescopic function can accomidate several batteries sizes 18650, 18500 and 18350..

Very similar looking to the GGTS

Locking Switch at the bottom, just unscrew it to prevent accidental firing
510 threads on the inside and 801 on the outside (of the center pin)
Vented bottom cap.and the top has an unscrewable.Adjustable airflow
It all comes apart for easy cleaning and rebuilding.

As with all machines parts is it recommended to use lube like Noalox on the threads to enable easier telescoping and changing of the batteries and to prevent galling or seizing.
Please use something as we do not warranty issues with seized or stripped threads..

109.11mm Height
132.39mm Height extended
23.10mm Diameter.
9.45mm Center hole.

You Will Receive:
1 MKB-TS ONLY.
Batteries for this mod must be purchased.separately.

Please Note: DO NOT stack batteries as this is a mechanical mod with no circutry, you will effectively double your voltage which can and will destroy attached devices.

Eric's review:
Very nice feel and build quality, you can tell it is not a cheaper run of the mill mechanical and some work went into it. Although I am not entirely happy with the gold plating, some areas are not perfect and for this price you can reasonably expect it to be so, so be aware, the unit I pulled out had some tiny scratches on one of the edges, nothing that won;t happn 15 minutes after you get it, but still would have ben nice to be perfect out of the shipping package. It even smells like it just came off the line at a machine shop, so clean it well.
To be completely honest I am not really sure what this is for, the threading for the 510 and 801 is 13.25mm below the open hole so it would take a few adapters to get this to work with a normal 510 or eGo atomizer. I am sure I am just an idiot here and there is a special purpose for it, if you know, feel free to email me and let me know An 801 atomizer will not fit in the hole which is 9.45mm. I bought it because it looks stellar, and I am sure there are things made specifically for this unit, please do not ask me about it, I just do not know at this time. I'll post when I find out.
This is NOT something you can just screw an AGA-T or other atomizer onto, please be aware of this. Returns for this unit will be inspected due to the cost. Please do not purchase it unless you know how to use it.

My forum browsers who are interested in this might .. I don't know.. maybe use a code like MKB-TS15 or something at checkout.