all wicks are going out tomorrow, we got some out today, the rest tomorrow, so on time 
- Status
Got the dreams back in today
DrawTubes are shipping on the 18th they didn't come.
The BT801 will be coming with it.
also some other codes:
The KTS Mechanical:
5.00 Off Code: ECFKTS5
KTS - Stainless - Mechanical Mod
The New.MKB-TS Telescope Mechanical mod
15% off with this code: ECFMKB
MKB-TS Telescope Mechanical Mod
as with all codes my cart only allows one at a time.
I also got some Beautiful (manufacturer) Dream rba's today again
Both the set with the coils and the singles in smoke and clear
7.00 off with this code: BT804
It good for all versions:
singles:
Dream Tank (BT804) Rebuildable Atomizer Single - Smoke
Dream Tank (BT804) Rebuildable Atomizer Single - Clear
and the set (with extra wicks):
Dream Tank (BT804) Rebuildable Atomizer - Clear
on a side note, all three of these use the same code so if they order more than one (of any type) it will take 7.00 off each
DrawTubes are shipping on the 18th
they didn't come.The BT801 will be coming with it.
also some other codes:
The KTS Mechanical:
5.00 Off Code: ECFKTS5
KTS - Stainless - Mechanical Mod
The New.MKB-TS Telescope Mechanical mod
15% off with this code: ECFMKB
MKB-TS Telescope Mechanical Mod
as with all codes my cart only allows one at a time.
I also got some Beautiful (manufacturer) Dream rba's today again
Both the set with the coils and the singles in smoke and clear
7.00 off with this code: BT804
It good for all versions:
singles:
Dream Tank (BT804) Rebuildable Atomizer Single - Smoke
Dream Tank (BT804) Rebuildable Atomizer Single - Clear
and the set (with extra wicks):
Dream Tank (BT804) Rebuildable Atomizer - Clear
on a side note, all three of these use the same code so if they order more than one (of any type) it will take 7.00 off each
I received the new AGA-T+ in today, yet another version.
This one has the 1.2mm airhole, so slightly larger and it has new grommets with lips instead of just orings to sit the plastic/glass on.
I also got the new glass for it and I will still be giving it away free with the order, sadly they did not send me extras
I do have a few but they are for a few people who got really bad ones I need to replace.
also the glass is NOT perfect.. of course right? why get something right the first time. Some areas are a little less than straight, again, because these guys do not know what they are doing with glass yet. That said, the new grommet makes it mute because it has a lip that goes on the outside of the glass/plastic and seals it.
I hope you all know I do NOT sell things and wait for improvements, they just keep doing it.
I am sure the next one will also have improvements.
Ok so pictures:
Not sure what is up with this pic, the air hole looks squished but it's not, it a perfect hole
New glass vs old glass
Grommet on the top
Grommet installed on both sides:
I also got the AGA Hydra, the IGO and more items back in stock and a new one the AGR which is a tank for boge and smoktech cartos, it has two plastic tubes to fit either and it a very nice design in stainless.
this tank takes flangeless tank cartos, the ones without the lip on the bottom, which I have in stock all ohms single and dual coils from smoktech (I do not have the boges)
Discount Vapors gets a mention from P Busardo in his review of the AGR Tank recently.
A PBusardo Review - The UDCT & AGR Locking Carto Tanks And PIPE CONTEST WINNER - YouTube
MKB-TS Telescope Mechanical Mod
My most expensive item ever for sure...
The Tubes and parts are all stainless steel
The top and bottom caps are copper with gold plating (I am not certan if it is real gold plate but I doubt it)
The telescopic function can accomidate several batteries sizes 18650, 18500 and 18350..
Very similar looking to the GGTS
Locking Switch at the bottom, just unscrew it to prevent accidental firing
510 threads on the inside and 801 on the outside (of the center pin)
Vented bottom cap.and the top has an unscrewable.Adjustable airflow
It all comes apart for easy cleaning and rebuilding.
As with all machines parts is it recommended to use lube like Noalox on the threads to enable easier telescoping and changing of the batteries and to prevent galling or seizing.
Please use something as we do not warranty issues with seized or stripped threads..
109.11mm Height
132.39mm Height extended
23.10mm Diameter.
9.45mm Center hole.
You Will Receive:
1 MKB-TS ONLY.
Batteries for this mod must be purchased.separately.
Please Note: DO NOT stack batteries as this is a mechanical mod with no circutry, you will effectively double your voltage which can and will destroy attached devices.
Eric's review:
Very nice feel and build quality, you can tell it is not a cheaper run of the mill mechanical and some work went into it. Although I am not entirely happy with the gold plating, some areas are not perfect and for this price you can reasonably expect it to be so, so be aware, the unit I pulled out had some tiny scratches on one of the edges, nothing that won;t happn 15 minutes after you get it, but still would have ben nice to be perfect out of the shipping package. It even smells like it just came off the line at a machine shop, so clean it well.
To be completely honest I am not really sure what this is for, the threading for the 510 and 801 is 13.25mm below the open hole so it would take a few adapters to get this to work with a normal 510 or eGo atomizer. I am sure I am just an idiot here and there is a special purpose for it, if you know, feel free to email me and let me know
This is NOT something you can just screw an AGA-T or other atomizer onto, please be aware of this. Returns for this unit will be inspected due to the cost. Please do not purchase it unless you know how to use it.
/snip
My forum browsers who are interested in this might .. I don't know.. maybe use a code like MKB-TS15 or something at checkout.
Do you have a pic with this setup in the 18350 configuration? I'll probably pick one of these up as soon as you snag some of those adapters for it. Thanks!
I don't actually see a way to fire 18350 in this, the spring on the bottom is not long enough or I am just not figuring it out.
I am going to have the revise the description on this until I figure it out.
I am going to have the revise the description on this until I figure it out.
I think I posted in the wrong thread before.. oops.. I got the three pipes, two are spoken for one is still available for one of the people here who said they wanted one but I have other people asking for it, so if you posted here asking about a pipe and have not contacted me please do so today or tomorrow.
When will the Terminator Rebuildable Atomizer be in stock again? I need one to match the MKB-TS I just ordered from ya.
I just heard there is a version 2 of the Terminator/Nautilus being released really soon!
Will it be available @ discountvapers.com!
Will it be available @ discountvapers.com!
Last edited:
I've read that Beautiful makes the U-Stand. Here's a pic of a more expensive, Russian version.
Eric, since you carry some Beautiful products, can you get these for us?
ETA: Are the Dual Coil 510 Chrome Tanks polypropylene or polycarbonate?
Eric, since you carry some Beautiful products, can you get these for us?
ETA: Are the Dual Coil 510 Chrome Tanks polypropylene or polycarbonate?
Last edited:
They are already on order
from what I know, the colored tanks are polycarbonate, the clear is supposed to be polypropylene
They are already on order
Yes!!!!
gormly said:
All the colored tanks that I've seen like that were polypropylene. But, since it's such a selling point and the description doesn't mention it, I was just wanting to make sure.
Can someone explain to me the difference of polypropylene and polycarbonate? Thanks
- Status
Similar threads
