New Reonaut from Italy

[thewomenfolk]

Be sure to get the Reomizer 2 like someone else here just said. And order the correct one! I ordered the wrong one and had to wait another week to get the one for the LP (low profile) Reo. If you have the LP Reo you'll need the LP RM2.

I used both the Sofia and Dripper Pro while waiting for the Reomizer and neither can compare to the RM2. You'll see what the Reo rage is all about when you get the LP RM2. There is no better tank atty than the Sofia, but she's just not made for the Reo, and the Dripper Pro is better on the Reo because it's got an air hole but still nothing compared to the RM2. Good luck and congrats on your new Reo!

 

[Sloth Tonight]

Be sure to get the Reomizer 2 like someone else here just said. And order the correct one! I ordered the wrong one and had to wait another week to get the one for the LP (low profile) Reo. If you have the LP Reo you'll need the LP RM2.

I used both the Sofia and Dripper Pro while waiting for the Reomizer and neither can compare to the RM2. You'll see what the Reo rage is all about when you get the LP RM2. There is no better tank atty than the Sofia, but she's just not made for the Reo, and the Dripper Pro is better on the Reo because it's got an air hole but still nothing compared to the RM2. Good luck and congrats on your new Reo!

dude - your avi - amazing! just look at those eyes!

 

[Jet Knight]

Welcome and enjoy the vape

 

[of944]

Antidoto, my 'flat rate' package arrived today after 13 days!

My tracking infos can be found in my Greenhorn ordered a Reo Grand thread.

 

[Antidoto]

Thank you @of944 and @izan. I hope to receive my reo before the 15th of August, so I will bring with me on holidays (italian posts permitting...)

 

[pwheeler]

Congratulations Antidoto! Be prepared to be totally amazed! Start saving when finances permit for your second Reo Look forward to your pictures and your first impressions! I never have been to Italy except twice, stuck at DaVinci airport for several hours each way waiting for my connecting flight. That was way back in the days of Pan Am. Welcome!

 

[Rickajho]

All we can do is sit back and wait with you now.

 

[Rickajho]

dude - your avi - amazing! just look at those eyes!

Dudette...?

 

[Antidoto]

Good news: yesterday my Reo has arrived in Italy. It should be at the custom office right now. Let's hope there will be no problems!

 

[Antidoto]

My Reo has arrived today! It took 12 days to Italy with the flat rate shipment. First impressions soon... I'm out for lunch, and I can't wait to come back home.

 

[Filthy-Beast]

Wow that is very nice! Congrats and Welcome to Reoville!

 

[CATastrophe]

Love the red door with the black!

I think it's gonna be really cloudy in Italy today!

 

[nerak]

That Black Wrinkle really makes the Metallic Red pop!

Not too bad timing getting to you either!

Let us know how much you like it later!

 

[Suchtie]

Nice REO ... black and red is beautiful

 

[Antidoto]

Wow, that's a really great piece of aluminum... I'm vaping on my Reo from yesterday evening, and I'm really pleased. I couldn't find the blem on it, perhaps a little imperfection near the spring, not a scratch, but it seems like an excess painting.

I have some doubts to whom perhaps you can reply:

1) My Reo came without the noalox, so I suppose it is no more necessary with new so contacts.

2) I couldn't unscrew the spring, because the screw is too tight for me, and I fear to ruin (I should have bought some as backup).

3) The tube came with a little reducer, so it's not necessary to cut the "inverted v" on the bottom (moreover the tube itself is short, and it doesn't touch the bottom of the bottle without the reducer);

4) I think the top of the tube is glued to the 510 pin, because it's not easy to detach (how will I replace in the future?).

At last another picture:

 

[Alamedean]

Wow, that's a really great piece of aluminum... I'm vaping on my Reo from yesterday evening, and I'm really pleased. I couldn't find the blem on it, perhaps a little imperfection near the spring, not a scratch, but it seems like an excess painting.

I have some doubts to whom perhaps you can reply:

1) My Reo came without the noalox, so I suppose it is no more necessary with new so contacts.
Don't think you'll need noalox anymore unless you are going deep into sub ohm territory.

2) I couldn't unscrew the spring, because the screw is too tight for me, and I fear to ruin (I should have bought some as backup).
I defer to others on this question but when you order again from Rob just get some of the other tidbits for backup, i.e.: sprints, o-rings etc.

3) The tube came with a little reducer, so it's not necessary to cut the "inverted v" on the bottom (moreover the tube itself is short, and it doesn't touch the bottom of the bottle without the reducer);
The reducer tube is not always necessary. Usually for thinner juice that might self feed the atty over the course of a hot day or perhaps if you live at high altitudes. Thinking if your tube isn't touching the bottom of the bottle then no need to cut the inverted v.

4) I think the top of the tube is glued to the 510 pin, because it's not easy to detach (how will I replace in the future?).
With a little force you will be able to detach the tube in the future. When replacing just add a drop of Super Glue to the new tube any slide that bad boy on and hold until dry.

Other peeps will chime in soon if they haven't already. Congratulations on your purchase.