New set up help & advice

[Sxpreme]

Hello all
I recently graduated from disposable hookah pens to vaporizers. I'm using a smok tech magneto v2 with an ehpro kayfun lite plus with dual airflow. I'm a bit in over my head. I'm using a standard 28g kanthal coil with cotton. My kayfun is leaking oddly and I don't know why. I watched a couple YouTube videos that showed how to fill it and put it back together and I followed those directions exactly but I'm still having leaks out of the air holes on the sides randomly and while I'm taking a drag. It also gurgles a lot and I'm not quite sure how to fill it without disassembling the whole thing. It seems to be full but when I flip it back right side up I can barely see the liquid anymore. Am I doing something wrong?

 

[Sthur]

Welcome to the forums, the ehpro KFL plus has a bottom fill port. I always fill it from the bottom with no problems. I usually wait a second for the air bubble in the top to come up and fill a second time. Try tilting it a little then filing a second time. I can fill my up and flip it and thought the window I see all juice ride side up or upside down.

Next regarding flooding, you probably don't have enough cotton. Do you tuck the ends into the juice channel? I usually run a 1.2 ohm micro coil, 3/32 drill bit, 7 wraps, and used to use cotton balls and now Japan cotton. You need enough for it to be snug and not tight. Then put the ring part of the chimney on, pull cotton up, trim 1-2 mm over the top, tuck into each side, put top chimney part on, assemble and fill.

Hope this helps and enjoy.

 

[Sthur]

Dp, damn submit button

 

[edyle]

Sounds to me like the top is not sealing.