Anyone know whats the cut off time for the new Vp short battery ? and the battery MAH ?. Just wonder how many puffs to dry out the fully charge battery.
New short battery
- Thread starter x3x
- Start date
- th_trl_thread_readers 0
- Status
only 180 mah ? the Xtra long one has 380 but its too long, wish there're short one w/ 200mah or so
The standard-length battery is 280mah.
The first post in this thread should answer most of your questions:
http://www.e-cigarette-forum.com/forum/vapor4life/56620-vapor4life-faq.html
Bob
The first post in this thread should answer most of your questions:
http://www.e-cigarette-forum.com/forum/vapor4life/56620-vapor4life-faq.html
Bob
I also prefer a firm draw and the new shorties ROCK!
If you have one of the older ones, you can tighten the draw by doing 2 things.
1. Break off a round wooden toothpick in one of the little airholes beneath the threads. Seat it real good with your thumbnail or something.
2. Seal off one of the 2 "vents" in the ash cap. You can try it with your finger to see if it works. If so, just block it off with something. If you are VERY careful, you can grab the ash cap with a pair of pliers and twist it off. That will give you all the access you need to fill the vent with something.
Hmm so the new shorty one, get better air draw than the standard one ? dang but only 180 mah, i guess i have to get a pcc w/ it .
The new shorty IS the standard one. The "old" shorties were a trial thing from a different manufacturer.
I have an assortment of all of the new 1-logo batteries (except standard length manual) and don't see any difference between any of them other than battery life.
Well, and the obvious weight & length & color thing.
Just so you know I'm not blowing smoke (no pun intended):
I don't have that many now. I gave a bunch to my son, daughter & her fiancee.
Next shorties will be 200 mah. regulars are about 300, xl aboput 400
working on then on a daily basis
be prepared to be SMILIN in2010
Nobody gonna touch us
working on 800-1500 mah, as well
working on then on a daily basis
be prepared to be SMILIN in2010
Nobody gonna touch us
working on 800-1500 mah, as well
Next shorties will be 200 mah. regulars are about 300, xl aboput 400
working on then on a daily basis
be prepared to be SMILIN in2010
Nobody gonna touch us
working on 800-1500 mah, as well
AWESOME!
I still need to get one of these in pink. My longs are tough to hide at work, lol.
Next shorties will be 200 mah. regulars are about 300, xl aboput 400
working on then on a daily basis
be prepared to be SMILIN in2010
Nobody gonna touch us
working on 800-1500 mah, as well
Ahhh WOAHHHH ! cant wait for da shorrtiess...make them before new year ? lol...hurry hurry
pawpaw, i read that post about sealing off an air vent @ exactly the right time. was just getting mildly frustrated my second day vaping (today) with it not feeling quite... right. that does the trick! for now will prob just keep my finger over the vent but might mod it more permanently late.r
Thanks!
You could also just seal it off with some of the thick super glue. If I did that, I would let it sit and dry for a looooooooong time before using it. I'm pretty sure inhaling those fumes would not do anything good.
You could also just seal it off with some of the thick super glue. If I did that, I would let it sit and dry for a looooooooong time before using it. I'm pretty sure inhaling those fumes would not do anything good.
"pretty sure" *laughs* actually though, depending on the heat tol of the ash cap, a blob of hot glue would prob work... and if i smished (technical term there) a bit while it was cooler but still soft, it'd blend in pretty well. :hmmmm:
- Status
