New Supplier, Boge Revolution 2

[db13berry]

You're welcome.

I came across another interesting detail. The cartos that came with my V2 seemed to not fit. When I tried to screw them on, they wouldn't thread. After making comparisons, it is the post on the cartos that is too long.

So, I had to take the carto that came with the V2 and push the post in flush with the threads. I just push that end down on a table surface. If the carto posts sticks out past the threading at all, it will not thread on.

HAHA! With my Riva I need the post to stick out to make connection. With the V2 I do not.

 

[boondongle]

Well, I just received mine, and I've been playing with it for about half an hour. I had a bit of buyer's regret after sending my money, since I just built myself a nice juice box mod, but I'm very glad I went ahead and bought this. Also, Jay really came through with the super-fast shipping, and I'm glad I took the risk with a new guy...I would definitely buy from him again.

Pros
* Uses cheap cartomizers instead of atomizers
* You don't need to fill up the cartomizer before using, just slap an empty on, pump the bottle a few times, and you're ready to go
* Good flavor
* Very good vapor
* Slick looking
* Fits well in the hand

Cons
* A bit bigger than I expected...probably just a shade too big for keeping in the front pocket of dress pants, but fine for jeans
* Not programable like the old model
* It may be personal preference, but the lanyard feels like it's on the wrong side for a right-handed user
* Bottle is a bit tough to get in and out

Other
* Anion mode...what does it do? The manual doesn't say...I'm guessing an air purifier/ionizer, but that's just a guess based on the name
* Large product labeling on the side...some might dislike it, others might think it looks good
* The manual doesn't say, but since there's no feeder line going to the bottom of the bottle, you probably need to hold it upside down once it's low on juice

All in all, I'm very impressed with this device. Looking forward to seeing how it performs over time.

 

[Drottwiler]

If all goes well I should have mine tomarrow.I'll give that baby awork out.Lol.Interested to see what the batt life is.

 

[jayvolt]

Boon, Thanks for the honest opinion. I will work on atty's though. They built it with cartos in mind but it uses a feed system identical to another not to be mentioned high dollar bottom feeder.

Also, with the addition of a small piece of plastic tubing (like said other bottomfeeder) you can juice it without putting it on its side.

 

[Drottwiler]

Boon, Thanks for the honest opinion. I will work on atty's though. They built it with cartos in mind but it uses a feed system identical to another not to be mentioned high dollar bottom feeder.

Also, with the addition of a small piece of plastic tubing (like said other bottomfeeder) you can juice it without putting it on its side.

The tubs what I plan on doing.I've done it with my other bottomfeeders works good.

 

[redheadone]

According to the USPS I should get mine tomorrow. I can't wait. Thanks Jay for the fast shipping I too am happy I took a chance on a new vendor. I will definately be doing more business. I will let yu know how this does after I have broken it in. Jay you must have missed my other post. I had asked you about the Lea and what you thought of it. I saw it on your site and am thinking about getting it when I get some more funds in. Do you think its worth the money? I would like your opinion on this product and when you think you will have them in stock

 

[jayvolt]

I personally like it. It has less flavor reduction than the EGO, it is a little classier and so far no leaks/burnt taste. I had a wow post earlier in the thread that simply says its like an EGO that actually works. I will have them in black and white (limited) for 55 + shipping.

My site should be live and stocked on Tues / Wed guys and gals, Look for the grand opening thread with bonus promo codes.

I will have a limited range of products but I tried to pick the ones that I KNOW are good and work, preferably things I use often myself.

Jay

 

[redheadone]

Thanks for the info Jay I may go ahead and get one towards the end of next week and see how it does. I have the ego-T now and although it is okay I have had some issues with it. Maybe this will work better.

 

[Drottwiler]

According to the USPS I should get mine tomorrow. I can't wait. Thanks Jay for the fast shipping I too am happy I took a chance on a new vendor. I will definately be doing more business. I will let yu know how this does after I have broken it in. Jay you must have missed my other post. I had asked you about the Lea and what you thought of it. I saw it on your site and am thinking about getting it when I get some more funds in. Do you think its worth the money? I would like your opinion on this product and when you think you will have them in stock

Good to see you changed your mine and went with Jay

 

[boondongle]

Boon, Thanks for the honest opinion. I will work on atty's though. They built it with cartos in mind but it uses a feed system identical to another not to be mentioned high dollar bottom feeder.

Also, with the addition of a small piece of plastic tubing (like said other bottomfeeder) you can juice it without putting it on its side.

Glad to hear it will also work with atomizers. I haven't tried that yet, but I will at some point. I don't know how you would go about attaching the feeder tube, but that would definitely be something I'd like to add at some point.

I definitely think that the negatives are very much outweighed by the positives, and i really like the device overall. In fact, I'm considering buying another as a backup device.

 

[jayvolt]

moved to site

 

[Drottwiler]

Woo Hoo mine just landed.I'll charge her then put her to the test.TY Jay

 

[beenshot]

got mine today. it works ok and does the job.
it's no Phid or Reo but it is a good beat around feeder that your not afraid to scratch up. actually the material it is made out of probably won't scratch easily.
overall.......
i am satisfied with it and it is a good bottom feeder for the money. it could be better and I expect to see some revisions made to it. for example: remove the anion function and make room for a bigger mah battery and a better 510 connector, the cartos dont fit in it very good IMHO.

thanks Jay for the super job you did in getting these things to us !!!!!!!!!!!!!!!!!!!!!!!!

 

[jayvolt]

Comments like that make my day man, glad to hear you are all happy. Just to let you know I will be offline a bit this weekend for the holiday, I have family coming in to town, email me or PM me if you need anything, and I will get back to you ASAP.

Jay

 

[care]

I received mine today. I have to say that the reviews here are spot on. After a few kinks, mine is doing really well. I love the bottle feeder. It’s exactly what I wanted. My favorite juice, Blue Cotton Candy, now has a home.

Jay, I want to thank you for everything and wish you luck on your new site.

 

[jayvolt]

No problem Guys, the site will be in grand opening mode wed/thur lates look for killer deals on boge cartos and attys. I will have LEO's and LEA's as well as Dual could XL cartos from smoktech and LR atty's from them as well.

Please check out the garage sale area too, I am cleaning out my personal mods as I have recently gotten a darwin and a few apex alphas and am in love.

 

[FrankR]

Thanks for the quick shipping and great communication, Jay. I was happy to have it in time to enjoy during this holiday weekend.

So far, not a bad product for the price. Any ideas on replacement bottles or adding tubing for better feeding? Right now, I find myself turing it on its side to give it a few squeezes and waiting for the filler to get wet. I kinda feel like a cartoon character staring down the barrel of a gun when it misfires

 

[jayvolt]

LOL, I am looking for the right sized tubing, hopefully I will carry it on my site. I sent an email to my rep about the bottles and needle tips, and will let you know as soon as I get word.

 

[Stownz]

Tubing definately helps a lot, without it you have to tip and squeeze and hope for the best 8)

Didn't have the right size tubing so I just glued a smaller size in: works fantastic.

Now time to grind down the connector so I don't have to wiggle the center pin on my attys to make them work.

 

[jayvolt]

Alright guys,

Please do me a favor and friend me/leave feed back as a comment on my profile. I will be closing this thread end of day monday. I will be opening a new "grand opening" thread as soon as the site goes live, and sending all 9 of my original buyers a special 10% off code.

I thank all of you for your initial purchase and look forward to your continued patronage. If you have ANY issues please send me a PM and I will do EVERYTHING I can to help you out.

Stownz thanks for the input, it is always appreciated.

Jay