New to vaping, wanted to know more

[alexisquinn]

Hi i'm using the s22 tank by jac vapour with the series B Tilt mod. I wanted to get more clouds. I like the taste that the s22 tank gives me compared to some of my friend's vape tanks and mods, I think one of them was the innokin or the vaperesso. I was wondering if anyone knew if I could use a different coil with the s22 tank? Or can I only use the brand's coils? I have the MTL 1.0 ohm coils on rn, but ive ordered the 0.5 ohm DL from jacvapour just to see the difference

 

[rollersk4te]

I'm not familiar with that tank, but .5ohm should produce an acceptable amount of vapor. You may want to look into getting a Smok baby beast, tfv8, or tfv12 if you want to lower the ohms more and produce bigger clouds.

Sent from my Z982 using Tapatalk

 

[stols001]

I don't know the tank either but it seems to me trying the 0.5 coil would be a fine idea. Typically, there is some sacrifice between flavor and clouds (at least, some believe so) although it really depends on quite how sub0hm you want to go. If you are enjoying the 1.0 coil though, 0.5 and the correct wattage and etc. should (in theory) about double your clouds (most other areas being equal). You may need to lower your nicotine some, but I'm not really sure, you'll have to experiment.

I'd say start there, and as others have mentioned if you want to go really sub0hm, there are tanks for that. Some require wattage ranges that your mod may not support for very long, given it's a single battery mod and etc.

Best of luck,

Anna

 

[mav_sd]

You'll notice a big difference running the new coils. When i was running tanks the .5 options were always the way i went and was happy with the vapor production.

 

[alexisquinn]

Thanks guys, i'll try the .5ohm DL coils first and I'll update!

 

[Baditude]

I have the MTL 1.0 ohm coils on rn, but ive ordered the 0.5 ohm DL from jacvapour just to see the difference

The 0.5 ohm coils theoretically should provide a little more vapor than the 1.0 ohm. May also need a little more wattage and drain your battery a little more faster, and vape through more e-liquid. That's the price we pay for sub-ohm vaping and more clouds.

I have to add I don't use the S22 tank by JAC. I do use the new JAC Vapour series B DNA75W.

 

[alexisquinn]

The 0.5 ohm coils theoretically should provide a little more vapor than the 1.0 ohm. May also need a little more wattage and drain your battery a little more faster, and vape through more e-liquid. That's the price we pay for sub-ohm vaping and more clouds.

I have to add I don't use the S22 tank by JAC. I do use the new JAC Vapour series B DNA75W.

I wanted to get the series B DNA75W as well but it was too pricey for me. Which tank do you use?

 

[MJCSD]

Hello and welcome to ecf

 

[Baditude]

I wanted to get the series B DNA75W as well but it was too pricey for me. Which tank do you use?

The original Uwell Crown clearomizer. My review is the second reply in this thread: Tanks & RDA's Ratings & Explanations

The JAC and Crown 1 is the best combo I've used in my 6 years vaping.

 

[BrotherBob]

I wanted to get the series B DNA75W as well but it was too pricey for me. Which tank do you use?

Welcome and glad you joined.
My tanks are deep well tanks. I'm vaping for flavor only.
Might like to read:
Drip Vaping: Your Guide to Dripping e-Juice | Vape-Resource.com
http://spinfuel.com/art-drip-guide-vaping/
https://www.e-cigarette-forum.com/forum/blog-entry/7-information-resources-for-your-first-rba.4454/
https://quitsmokingcommunity.org/electronic-cigarettes/what-is-an-atomizer-definition/
Rebuildable Tanks Explained: RBAs vs RDAs vs RTAs vs RDTAs
https://www.e-cigarette-forum.com/forum/threads/wrapping-building-coils-101-for-beginners.745045/
http://www.geekayvapes.com/squonking-101/
https://www.e-cigarette-forum.com/forum/threads/i-love-my-rda.805461/#post-19616327

 

[alexisquinn]

Welcome and glad you joined.
My tanks are deep well tanks. I'm vaping for flavor only.
Might like to read:
Drip Vaping: Your Guide to Dripping e-Juice | Vape-Resource.com
http://spinfuel.com/art-drip-guide-vaping/
https://www.e-cigarette-forum.com/forum/blog-entry/7-information-resources-for-your-first-rba.4454/
https://quitsmokingcommunity.org/electronic-cigarettes/what-is-an-atomizer-definition/
Rebuildable Tanks Explained: RBAs vs RDAs vs RTAs vs RDTAs
https://www.e-cigarette-forum.com/forum/threads/wrapping-building-coils-101-for-beginners.745045/
http://www.geekayvapes.com/squonking-101/
https://www.e-cigarette-forum.com/forum/threads/i-love-my-rda.805461/#post-19616327

This is very helpful! Thanks, i'll read up on it

 

[AzPlumber]

Just be aware that airflow is an important part of the enjoyable vape puzzle. The higher the wattage the more airflow needed to keep the coil temperature in the enjoyable range. Depending on your settings (watts/airflow adjustment) with the new coil you may need to adjust your inhale style to create more airflow.