NEW YIHI SX MINI ML CLASS!

[KGB7]

Well I'll show you what I get when I tryView attachment 524916

mod is not detected by your PC.

 

[Vlad1]

Well I'll show you what I get when I tryView attachment 524916

Once you have the device connected and detected you will be able to install or reinstall the driver.

 

[2legsshrt]

OK they haven't even sent it yet the Ninjas must be having problems with the snow.

 

[Quantum Mech]

You know we are all going to go crazy looking for deals and the early folks will pay full price in a pre-order when it is announced.

Discounted already & its not even out yet

YiHi SX Mini Q Class

 

[2legsshrt]

Damn that's convenient get this ML and the Q comes out the next day.

 

[retird]

So the new Q has a new case design, dual series batteries (with balancing charger) and 200 watts thus the new board...anything else I missed that the ML doesn't have?

 

[Quantum Mech]

So the new Q has a new case design, dual series batteries (with balancing charger) and 200 watts thus the new board...anything else I missed that the ML doesn't have?

It can fire nearly any wire as its TCR values go a lot lower and the ohms reading is 0.0000

 

[Quantum Mech]

Damn that's convenient get this ML and the Q comes out the next day.

Think of vapocolypse

@JimScotty0 said you best add the Q Class to your collection mate

If you get equal numbers of Q's as you have M's there are 5 different colours too

 

[retird]

Ohms@ 0.0001.... wonder how it will detect a output "short" ?

 

[Quantum Mech]

It will likely have a resistance limit well above that but will read to that accuracy

 

[2legsshrt]

Think of vapocolypse

@JimScotty0 said you best add the Q Class to your collection mate

If you get equal numbers of Q's as you have M's there are 5 different colours too

I'll wait till it comes down to 79.95

 

[2legsshrt]

I think I'm good between my Heart condition and COPD I'm going to die before I ever run out then it will be up to my wife to try to sell all this crap.

 

[2legsshrt]

That means I can use Kanthal for TC right

 

[2legsshrt]

As long as the coil is below .5ohms.

 

[2legsshrt]

Let's see Kanthal has a TCR of .0002 so that should work right?

 

[2legsshrt]

16awg wire at 200w WOW I would like to try that new atty but I like vaping ablout 5+ flavors at a time so I would just have to use the Pure and my ML with my fave,fave.

 

[Vlad1]

I think I'm good between my Heart condition and COPD I'm going to die before I ever run out then it will be up to my wife to try to sell all this crap.

Have you heard of IBV implants 2legsshrt? My mother had extreme COPD from decades of smoking but was borderline healthy enough to get into the trial and was lucky enough to be one to receive the implants. She passed mid last year but they added several years to her life and she was thankful for that time.

 

[JimScotty0]

It will likely have a resistance limit well above that but will read to that accuracy

I believe the lower limit for TC is .05 ohms so anything lower should display a low resistance error as follows unless you change it to look like something else with the SXi Logo Maker.

 

[JimScotty0]

Let's see Kanthal has a TCR of .0002 so that should work right?

The accurate resistance ability won't help you with Kanthal A1 @2legsshrt. The problem with that wire is that it is stable resistance during heat changes unlike Nickel, Ti, NiFe, or even SS and others.

 

[Quantum Mech]

I believe the lower limit for TC is .05 ohms so anything lower should display a low resistance error as follows unless you change it to look like something else with the SXi Logo Maker.

View attachment 524937

Things like this would be better served with a colour screen

@Yihi, there is still time prior to release to give us some colour in our lives