No more leaking problem with the clearomizers or fluxomizers

[Mariusica]

Just want to share with all of you my successful experiment . buy a heat shrinking tube bigger in diameter than a regular analog . Cut it about 12 mm and placet on the bottom of your clearo or fluxo , with a lighter start heating the tube from about 1 inch distance . It will seal compleatle the bottom of your clearo/fluxo . Make sure you leave 3 or 4 mm at the end of it so it can close on the mettal peace when heated . It works , no more leaks . The heat tube I got it from my cruise ship where I work but radio shak and ACE have it as well , few cents .

 

[Mariusica]

I will try to answer your questions , however consider that where I work and live for 6-10 months a year , I need to pay $20 for 3 hours of Internet so I won't be staying to much online

 

[juicefreak]

Mariusica i won't tie up your costly internet time, but just wanted to say excellent idea. i know they make clear and multicolor shrink wrap too. it's an easy fix to use them stock until the wick falls apart w/o having to immediately use a syringe mod. thx!

 

[daisyd]

+1 on this. I have done this (with black, didn't even know they made clear). I also did one then slid a pin between the tube and shrink wrap until it slid off. This makes a sleeve that helps give the tubes a little shock absorbancy, but is removable since they don't fit in my PCC with the shrink tube on. My husband has been running around with his in his jacket pocket and hasn't had one crack yet. *knock on wood*