no vapor out put...vivi nova/lambo

[V00D00]

Hi guys,
I have a Lavatube (lambo) from aqua vapor cigs and a vivi nova mini and for some reason I cant get any vapor out of it. The lavatube shows that the atomizer has a 2.0 resistance and everything else is fine but I can't get a draw off of it. After troubleshooting I used a 510 extender and then it would let me draw off of it and I got vapor. This leads me to believe that there is a problem with airflow, but I don't know what to do from here. I wouldn't mind it, but it looks .... ugly so does anyone have a solution? I don't get why its happening.

 

[JBR3AK]

I've just ordered an apollo vtube mini. In a nutshell, there needs to be a vent of sorts for you to draw any vapor up from the tank from what I've researched and noted. Ive ordered an ego 510 adapter from apollo for this reason. Some people say its too airy, some day it's too tight. You can try backing the tank off about 1/8th of a turn and see if it helps. With the adapter, if its too tight, back the adapter off slightly. The reason for the no draw , is that the "vent holes" are being completely choked by the tank. The tank sits flush against the tube without the extender. Try taking a vape, and nothing. Back the tank off the tube a little, and it should vape.

 

[JBR3AK]

This is particular with the lava tubes and some tanks. Primarily, the vivi nova 2.5 tanks. I'll have to see for myself when my apollo gets here.

 

[steved5600]

Could be a plugged air hole or the wick is gunked up. Try cleaning it. What voltage are you using? Have you checked to see if you're getting voltage out of the lambo.
It can't hurt to drop the metal parts and the atty head in alcohol and let it soak then blow it out. I'd take the head off when you soak it the vent hole on the vivi if you have a Vision is just above the 510 threads and goes up the shaft to the head. That shaft or the hole could be plugged. Also there is a silicone cap on the atty/head. It has two ways to go on. There is a flat side and a funnel shaped side the funnel goes up the flat down.
One of these is bound to fix it. OH also there is a hole in the center of the head center conductor. That could be plugged.

 

[angelo Costello]

Use a ego skirt or 510 to 510 connector both work
There isn't airflow cause there isn't a gap between the 2
But try it both of them work for me

 

[Dauyd]

The problem is the skinny positive pin on the l-rider lavatubes. The vivi nove has a slightly oversize hole in the bottom, and the pin can plug the hole. A 510-510 shorty adapter, or an ego cone will fix the problem.

 

[Michaaar]

Eh, just wait until the 510 press fitting comes out of the lambo, because it will, when you stick it back in that 2.5 draws like a champ!

 

[V00D00]

Press fitting? Do you mean the center pin?

Sent from my Galaxy Nexus using Tapatalk 2

 

[Michaaar]

No, the Lavatube (Lambo) has a 510/ego connection, its just a press fitting, if you aren't careful you
can end up pulling that fitting out. Not a huge deal, I've done it a half a dozen times, just take a ballpeen hammer and tap it back in. xD