Noisy Cricket

[mhertz]

It's not a hybrid as stated and wismec is using wrong terminology...

 

[Bad Ninja]

Noisy cricket is a hybrid series and does have 510 threads. The center post does make direct contact to battery.

Edit: Wismecs website states:
Special Linkage Set: The linkage at the baseboard, along with the hybrid adaptor, works well with 510 connectors of different lengths, which greatly increases the suitability of the device.

Wisemec is using incorrect terminology.

Hybrids have a Dedicated atomizer and no 510 threads

 

[Live4Vaping]

Just so you can see I am being safe. Here is my latest build.

 

[LevineDelta]

Keep it above 0.4, even at 0.5 it's rowdy as hell.

I found my sweet spot is 0.7

Sent from my Nexus 6 using Tapatalk

I agree, i built a 0.28 dual micro coil setup and holy cow this thing was explosive with vapor and the heat was almost unbearable, even at 0.50 i felt like this Noisy Cricket was shooting out 200 watts lol When i get home i'm going to make a 0.7 or even 0.8 and see how it goes.

 

[LevineDelta]

I use heat sink as well, works very well and an additional layer of safety.

Sent from my Nexus 6 using Tapatalk

No need to use a heat sink with a Jaybo Indestructible rda, it was specifically made for the Noisy Cricket.

 

[LevineDelta]

It is not a hybrid.

"Pinless" or "direct to battery".

Hybrids do not have 510 threads.

Its not a hybrid? Its advertised as stated below which i just copy and pasted.

Noisy Cricket Mod
High Power Output
Changeable 18650 Cells Structure
Bottom Ventilation Holes
SMPL Style Hybrid

 

[edyle]

Its not a hybrid? Its advertised as stated below which i just copy and pasted.

Noisy Cricket Mod
High Power Output
Changeable 18650 Cells Structure
Bottom Ventilation Holes
SMPL Style Hybrid

My avi on the left shows a truehybrid, atmomixani style nemesis and 3d rda; no 510 threads.

The SMPL style is 510 thread with no centerpin.

 

[Bad Ninja]

Its not a hybrid? Its advertised as stated below which i just copy and pasted.

Noisy Cricket Mod
High Power Output
Changeable 18650 Cells Structure
Bottom Ventilation Holes
SMPL Style Hybrid

It's not a hybrid. Neither is a SMPL.
As stated above, they are "direct to battery" or pinless mods.
Those were originally called "hybrid look" mods.
Eventually uneducated people began incorrectly dropping the word "look".

That doesn't make them right, it makes them uninformed.

A hybrid doesn't have 510 threads.
The atomizer attaches directly to the body of the mod.
Most have dedicated atomizers.

Hybrids are probably the safest of all
Mechanicals, because you cannot make the mistakes of using the wrong atomizer.

Know your gear. It's the only way to use it safely.

 

[LevineDelta]

It's not a hybrid. Neither is a SMPL.
As stated above, they are "direct to battery" or pinless mods.
Those were originally called "hybrid look" mods.
Eventually uneducated people began incorrectly dropping the word "look".

That doesn't make them right, it makes them uninformed.

A hybrid doesn't have 510 threads.
The atomizer attaches directly to the body of the mod.
Most have dedicated atomizers.

Hybrids are probably the safest of all
Mechanicals, because you cannot make the mistakes of using the wrong atomizer.

Know your gear. It's the only way to use it safely.

Good to know man, i make sure to have a good protruding center pin on the RDAs that i use on this device and i only use Sony VTC4s and 5s. Also I don't go below 0.5 on this specific mod. So i believe i'm safe.

 

[r055co]

Well I bored out the air holes on one of my Bellus's (have 2), since I like using heat sinks with the Cricket it also extends the 510 pin I popped in on. Running 32/36 fused Clapton's @ 0.9.

Nice Vape

Sent from my Nexus 6 using Tapatalk

 

[Bad Ninja]

Well I bored out the air holes on one of my Bellus's (have 2), since I like using heat sinks with the Cricket it also extends the 510 pin I popped in on. Running 32/36 fused Clapton's @ 0.9.

Nice Vape

Sent from my Nexus 6 using Tapatalk

Your Bellus has an adjustable 510.

 

[LevineDelta]

Is this a good place to discuss whats your favorite build on the Noisy Cricket?

 

[r055co]

Your Bellus has an adjustable 510.

Cool, never actually checked it out. I just always use heat sinks with my little beast [emoji57]

Sent from my Nexus 6 using Tapatalk

 

[r055co]

No need to use a heat sink with a Jaybo Indestructible rda, it was specifically made for the Noisy Cricket.

Keeps it cool

Sent from my Nexus 6 using Tapatalk

 

[Bad Ninja]

Cool, never actually checked it out. I just always use heat sinks with my little beast [emoji57]

Sent from my Nexus 6 using Tapatalk

I love my Bellus.
Now I need a cricket.

 

[r055co]

Well I tried another Tank, the VCMT 25mm, damn awesome on the Cricket. Got a 30/34 fused Clapton's, 2.5mm di, 8 wraps which ohms out to 0.71. Tank has plenty of airflow along with room to build. Heat sink also gives the clearance for the firing switch.

I love this Tank and of course the Cricket is in a class of its own!

Sent from my Nexus 6 using Tapatalk

 

[LevineDelta]

Well I tried another Tank, the VCMT 25mm, damn awesome on the Cricket. Got a 30/34 fused Clapton's, 2.5mm di, 8 wraps which ohms out to 0.71. Tank has plenty of airflow along with room to build. Heat sink also gives the clearance for the firing switch.

I love this Tank and of course the Cricket is in a class of its own!

Sent from my Nexus 6 using Tapatalk

I agree the Cricket is in its own class, but i can't really seem to find a perfect build for it yet... i have a favorite build for every RDA/Mod from the Velocity, to the Aeolus Lite, to even the OG Magma and each one has to be on the correct Mod or Mech, i'll keep tinkering though!