The nice thing is that it will use the same coils as the original ProTank, so it won't be obsolete. I love the standardization!
- Status
The nice thing is that it will use the same coils as the original ProTank, so it won't be obsolete. I love the standardization!
Like the new design and ability to clean and dry it but I am stocked with v1 with no complaints, i make my coils with 30 ga wire 7 wraps around a 2.5 wick at 1.5 ohm's at 3.7v clouds of vapor. Wish I would have known how easy these was to rebuild as I still have 9 of the 10 spare heads I bought plus the two that came with the tank just keep rebuilding them. All my other attys just collecting dust.
items needed to start
Ii
take it apart
wraped wick
3.4 volts 1.5 ohms i the use darwin to check ohms
coil put back together
load it up put on my china gg
loads of vapor for ya danno. is this what you are looking for i clean it about every 3 days will work for weeks to a month depending on pg/vg ratio, a 18350 battery will last about 10 to 12 hours with this setup. ( sorry for the hairy knee in the pick)
Last edited:
Hi y'all,
Danno, have the new PT2s come in yet? I'm on the notify list, just getting antsey pantsey?
Danno, have the new PT2s come in yet? I'm on the notify list, just getting antsey pantsey?
Hi dodari : )
I just did a track on it and it won't come in today but very well may arrive tomorrow....
I just did a track on it and it won't come in today but very well may arrive tomorrow....
Hi y'all,
Danno, have the new PT2s come in yet? I'm on the notify list, just getting antsey pantsey?
Gaaa-aak! I keep hearing the song 'Anticipation' going around in my fuzzy ol' brain.
Patience my ....
Kanger RUMBLES forward with its flagship TANK the ProTank VERSION TWO. And we at GotVapes are goign to give it the 21 Canon Salute. We are offering a $4.00 OFF coupon code during the first 24 hours of release. The ProTank II is fully dis-assembleable and you can use your own 510 tip if wanted. We will also have all colors of replacement Pyrex tubes coming in directly from Kanger hopefully by the end of the week - 5 DIFFERENT COLORS. We will also have replacement bases. The ProTank II will use all legacy ProTank heads you might be using NOW.
code: protank2rumble
We will have this up in stock by possibly as early as Tuesday with our initial shipment of nearly 400 Pro Tank 2. You will be able to use any qualifying discounts on TOP of the $4.00 off coupon code including Newsletter VIP 5% off and any Super VIP discount percentages you have earned so far - helping you to be sure to get you a crow's seat in this incredible TANK as painlessly as possible!
Go to the link below and click "Back In Stock" notify to get immediate news as soon as they are released to be sure to get your savings.
bumples...
I've only seen the replacement glass tubes in 5 colors, one place had a set of them
Last edited by a moderator:
You can be certain that GV will get them and I'd be willing to bet they are already ordered and will be here soon.
We have them coming direct from Kanger - all five colors. We have a large shipment from Kanger in all five colors of the complete kits then we also have spares. Spoke to Kanger tonight and they themselves told me they will have the colored tubes and will ship them in next day or so. This is besides what we should receive of the clears today.
I am going to put them up as soon as I have them in hand, when our delivery truck comes in. I will not do a detailed product page until later so as not to delay putting them up...so everyone be on the lookout sometime even possibly before noon.
Got to the page in the OP and put a Back In Stock Notify so you get the email alert as soon as I put numbers in stock....
I am going to put them up as soon as I have them in hand, when our delivery truck comes in. I will not do a detailed product page until later so as not to delay putting them up...so everyone be on the lookout sometime even possibly before noon.
Got to the page in the OP and put a Back In Stock Notify so you get the email alert as soon as I put numbers in stock....
This is the GotVapes forum are and posting links or asking others to post links to other vendors would be rude...
you are in GotVapes threads within the forum ....if you want that info about another vendor...please send a PM to the individual. Linking to another vendor within any vendors threads is a no no.
Hi Danno,
Has that danged delivery truck come yet, maybe it's close and breathin' hard?
My ordering Didgidt is getting very rigid-t. It's itchin', maybe got a rash.
- Status
Similar threads
- Locked
- Locked
