Hi everyone,
Keeping with this years theme of bottom dual coil head types, this week see's the release of iClear 16D clearomizers.
Please note this is a completely new style of clearomizer and is not cross compatible with the original iClear 16 clearomizer - see below for more info.
iClear 16 - the original and as supplied in some of our starter kits
iClear 16D - is new and also requires a new head type - iClear 16B just to add confusion....
Cleaning and maintenance of your batteries and chargers - Please clean your battery and charger contacts before each charge - a quick wipe out with a tissue is all that is required usually, we have noticed on some warranty returns that the battery connections are often in a shocking (no pun intended) state and quite possibly contributed or caused failures from this lack of general maintenance and care - this could end up with a failure being declined for warranty.
Stock notes
iClear 16 dual coil heads - see below for new options - all now back in stock.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
iClear 16D - BCDC Clearomizer - Bottom changeable dual coil
Introducing the iClear 16D by innokin
New to Naked Vapour Feb 2014, Innokin have redesigned the iClear 16 (as in some of our starter kits) to now offer a bottom mounted dual coil type.
With the head mounted at the base, e-Liquid is typically covering the wick entry points to aid good coil/wick resaturation, therefore reducing the risk of dry burning.
What else is different?
iClear 16D - Bottom Dual Coil Clearomizer
NEW - Intro Pricing while stocks last!
BCDC Clearomizer
iClear 16B Bottom Dual Coil Heads - 5 PACK
Replacement dual coil heads for the Innokin iClear 16D and 16B only
5 PACK
iClear 16B Replacement Heads
- 5 Pack
For iClear 16D or 16B
Short Silicone Mouthpiece - 6 pack
These fit over most standard 510 tips or mouthpieces that have a diameter of 9mm or greater.
They provide a softer mouthfeel and may help reduce e-Liquid condensate escapes with the centered airway hole.
- Also handy for identifying similar clearomizers - colour coding etc
Needle Capped Bottles
One of the best accessories for refilling e-Liquids.
These needle capped bottles help make refilling simple and easy, the needled cap helps get the e-Liquid to where it is supposed to go.
The bottles are soft and semi-transparent and easy to squeeze.
TIP: Our standard dripper bottles are also compatible with these bottle lids, just remove the dripper cap first.
Each set contains
Needle Capped Bottles
10 or 30ml
8 colours to choose from
See our e-Liquid mixing kit listing for more info on how to begin making your own e-Liquids!!
e-Liquid Mixing Kit
Whats in the kit?
Atomizer Resistance Meter V2
Easily test cartomizers, clearomizers and atomizers and now batteries with the includedadapter - all without having to use a multi-meter!
Suitable for measuring e-cigarette atomizer circuits with connections types: 510 or eGo
iClear Dual Coil Head - Replacement 5 PACK
Replacement dual coil heads for the Innokin iClear 16 and iClear 30 Dual Coil Clearomizers only
5 PACK
1.5ohm - IN STOCK - heads are typically suitable for eGo type output devices, 3.3-4.0v
2.0ohm - IN STOCK - heads are better suited at voltages over 3.7volt - EVOD - eGo-C & Biansi batteries - as supplied in the clearomizers in the Naked iClear 16 kits and Explorer kit
We have new generic iClear 16 heads - available from the drop down menu (unbranded heads - suspected to be Innokin, same head, same packaging, same outer box type) - same cost also hence no difference in price.
1.5ohm - Generic type - in stock
2.2ohm - Generic type - in stock
iClear 16 - Dual Coil Head - 5 PACK
5 Pack
Replacement Heads
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
Copyright © 2014 Naked Vapour Ltd, All rights reserved.
Keeping with this years theme of bottom dual coil head types, this week see's the release of iClear 16D clearomizers.
Please note this is a completely new style of clearomizer and is not cross compatible with the original iClear 16 clearomizer - see below for more info.
iClear 16 - the original and as supplied in some of our starter kits
iClear 16D - is new and also requires a new head type - iClear 16B just to add confusion....
Cleaning and maintenance of your batteries and chargers - Please clean your battery and charger contacts before each charge - a quick wipe out with a tissue is all that is required usually, we have noticed on some warranty returns that the battery connections are often in a shocking (no pun intended) state and quite possibly contributed or caused failures from this lack of general maintenance and care - this could end up with a failure being declined for warranty.
Stock notes
iClear 16 dual coil heads - see below for new options - all now back in stock.
Archive of previous weekly newsletters - Click here
Cheers and vape on!
iClear 16D - BCDC Clearomizer - Bottom changeable dual coil
Introducing the iClear 16D by innokin
New to Naked Vapour Feb 2014, Innokin have redesigned the iClear 16 (as in some of our starter kits) to now offer a bottom mounted dual coil type.
With the head mounted at the base, e-Liquid is typically covering the wick entry points to aid good coil/wick resaturation, therefore reducing the risk of dry burning.
What else is different?
- Integrated tip & fewer parts overall, the main tank section is now a one piece design - reducing moving parts, o-rings that do wear overtime.
- Slightly larger e-Liquid capacity at approx 2.0ml
- Head can be changed without requiring an empty tank!
- BCDC - Bottom changeable dual coil
- NB: eGo only type connection - suitable for direct use with eGo-C, EVOD, Biansi batteries - 510 only type connection devices will need a 510-eGo adapter
iClear 16D - Bottom Dual Coil Clearomizer
NEW - Intro Pricing while stocks last!
BCDC Clearomizer
iClear 16B Bottom Dual Coil Heads - 5 PACK
Replacement dual coil heads for the Innokin iClear 16D and 16B only
5 PACK
- 1.5ohm suitable for 3.3 volt type outputs - Old eGo-T type batteries
- 1.8ohm is suitable for 3.7 volts type outputs to around 4.2volt - eGo-C, EVOD type batteries
- 2.1ohm is suitable for 3.7volt and over - eGo-C, EVOD, Biansi type batteries
iClear 16B Replacement Heads
- 5 Pack
For iClear 16D or 16B
Short Silicone Mouthpiece - 6 pack
These fit over most standard 510 tips or mouthpieces that have a diameter of 9mm or greater.
They provide a softer mouthfeel and may help reduce e-Liquid condensate escapes with the centered airway hole.
- Compatible with Ovape, Ce4, Ce5, V2, V3, V3+, iClear 16, iClear 16D, EVOD etc and many more
- Also handy for identifying similar clearomizers - colour coding etc
- Disposable - these are a use once or twice type item.
- Choose any 3 colours from the drop down menu upper right - 2 of each colour are supplied
Needle Capped Bottles
One of the best accessories for refilling e-Liquids.
These needle capped bottles help make refilling simple and easy, the needled cap helps get the e-Liquid to where it is supposed to go.
The bottles are soft and semi-transparent and easy to squeeze.
TIP: Our standard dripper bottles are also compatible with these bottle lids, just remove the dripper cap first.
Each set contains
- 1 x PE Bottle; choose from 10 or 30ml size options
- 1 x Needled screw top lid
- 1 x Needle Cap lanyard/cover
Needle Capped Bottles
10 or 30ml
8 colours to choose from
See our e-Liquid mixing kit listing for more info on how to begin making your own e-Liquids!!
e-Liquid Mixing Kit
Whats in the kit?
- 5 x 5ml Flavour concentrates Choose from drop down menu's on the right
- 4 x 10ml Naked Vapour Premium handmade Doublers or Singles Choose from drop down menu's on the right
- 1 x 10ml plastic Graduated Cylinder (upgradeable)
- 2 x 10ml empty dripper bottles
- 2 x 20ml empty dripper bottles
- 100ml bottle of PG
- 100ml bottle of VG
- Syringe with blunt needle
Atomizer Resistance Meter V2
Easily test cartomizers, clearomizers and atomizers and now batteries with the includedadapter - all without having to use a multi-meter!
Suitable for measuring e-cigarette atomizer circuits with connections types: 510 or eGo
- NB: requires 2 AA batteries - not supplied
iClear Dual Coil Head - Replacement 5 PACK
Replacement dual coil heads for the Innokin iClear 16 and iClear 30 Dual Coil Clearomizers only
5 PACK
1.5ohm - IN STOCK - heads are typically suitable for eGo type output devices, 3.3-4.0v
2.0ohm - IN STOCK - heads are better suited at voltages over 3.7volt - EVOD - eGo-C & Biansi batteries - as supplied in the clearomizers in the Naked iClear 16 kits and Explorer kit
We have new generic iClear 16 heads - available from the drop down menu (unbranded heads - suspected to be Innokin, same head, same packaging, same outer box type) - same cost also hence no difference in price.
1.5ohm - Generic type - in stock
2.2ohm - Generic type - in stock
iClear 16 - Dual Coil Head - 5 PACK
5 Pack
Replacement Heads
Archive of previous weekly newsletters - Click here
Until next week, cheers from Rob, Lia and team at Naked Vapour.
Naked Vapour is New Zealand's e-Cigarette specialist.
www.nakedvapour.co.nz
Copyright © 2014 Naked Vapour Ltd, All rights reserved.
Last edited by a moderator:
