**official canvape.com thread**

Status
Not open for further replies.

Mindfield

Vaping Master
ECF Veteran
Verified Member
Aug 28, 2010
5,029
2,631
53
Toronto, ON
Whaaaat. Now you have to tell us more.

Well, I don't know who might be getting it and whether they want to keep it under wraps for now, so I will just leave this evil teaser here.

lhyxm4ja.jpg


After much denying it, I will have to admit that either slotting my DC cartos is causing a flavor change or the cartos are bad......I just slotted the latest pack i got in and the flavor is just not working. I am getting a stale taste, tastes like the wicking material or what i imagine the wicking material to taste like as i have not chewed on any lately :p So I am out a pack of cartos as i dont want to waste anymore juice in these ones. When I am able to buy more i am going to stick to punching them and see if i can get that good old flavor back! Just thought i would say that.

I am convinced that the latest batch of SMK cartos have issues. The 2.7ohm singles I got get a burnt taste after just a couple of hours (so it's not wicking to the coil), and the DCT cartos I've tried so far either only last a couple of days before the draw starts tightening up, or they have trouble wicking period, in which case I have to slot them. I slotted one last night and it's working in my tank so far but I can already detect a slight increase in tightness to the draw. On the other hand the 2.7ohm single I slotted won't do anything but burn.

Yea but they are bottom coil and when people donate their life to them it's all they buy sometimes :(

There are some new bottoms out that are supposedly good from what I see on GotVapes. I'm not sure about the Kryptonite 8, but I do have a sample of the forthcoming Phoenix bottom coil coming probably this week to try. I'm still skeptical about bottom coils so we'll see how that pans out.

I think so, sent you an e-mail to make sure I'm not sleeping at the wheel :) It won't be as cheap as a lavatube that's forsure.

Probably not but knowing them it will still be reasonably priced for what it will be.
 

therealcmac

Vaping Master
ECF Veteran
Verified Member
Nov 6, 2011
3,012
1,708
47
Vancouver Island, BC Canada
www.youtube.com
Well, I don't know who might be getting it and whether they want to keep it under wraps for now, so I will just leave this evil teaser here.

I am not as evil as you, these beauties need to be seen! :p I will however be a bit evil and remove the branding LOL

28mgzzd.jpg
 

brinks7

Senior Member
ECF Veteran
Verified Member
Oct 3, 2011
218
111
Belleville ON
Well, I don't know who might be getting it and whether they want to keep it under wraps for now, so I will just leave this evil teaser here.

http://i234.photobucket.com/albums/ee165/Psychopusher/lhyxm4ja.jpg[/[/QUOTE]

Not cool mindfeild, not cool.

Just kidding your picture was enough for me to sort it out.
Thanks
 

mopar

Unregistered Supplier
ECF Veteran
May 15, 2011
2,116
1,758
47
Toronto
www.canvape.com
Yea we've been in the waiting wing for that baby for months, I thought I missed something. Will go onsale April and then who knows when we will get them. Lately the quality of all the 1st gen stuff in China is poor and rushed so if they send me a sample ahead of time to see what it is like I will commit to the heavy MOQ upfront but if they just want me to blindly send them 10K for a bunch of crap I'll wait till everyone else buys it up they fix the initial issues then cut the price and we can all rejoice :)

At the same time LR was created to simulate HV vaping on 3.2-3.7V. When you start to hit it at high voltage it's just going to end up being burnt toast or plastic save the Smok DC's. Which is maybe why they created the beast.
 
Last edited:

zer0ith

Ultra Member
ECF Veteran
Verified Member
Mar 28, 2011
2,261
2,061
42
Burlington, Ontario
Yea we've been in the waiting wing for that baby for months, I thought I missed something. Will go onsale April and then who knows when we will get them. Lately the quality of all the 1st gen stuff in China is poor and rushed so if they send me a sample ahead of time to see what it is like I will commit to the heavy MOQ upfront but if they just want me to blindly send them 10K for a bunch of crap I'll wait till everyone else buys it up they fix the initial issues then cut the price and we can all rejoice :)

At the same time LR was created to simulate HV vaping on 3.2-3.7V. When you start to hit it at high voltage it's just going to end up being burnt toast or plastic save the Smok DC's. Which is maybe why the created the beast.

Need a beta tester buddy? :D :vapor::vapor::vapor:
 

northofamerica

Super Member
ECF Veteran
Verified Member
Feb 5, 2012
452
207
Saskatoon
Yea we've been in the waiting wing for that baby for months, I thought I missed something. Will go onsale April and then who knows when we will get them. Lately the quality of all the 1st gen stuff in China is poor and rushed so if they send me a sample ahead of time to see what it is like I will commit to the heavy MOQ upfront but if they just want me to blindly send them 10K for a bunch of crap I'll wait till everyone else buys it up they fix the initial issues then cut the price and we can all rejoice :) At the same time LR was created to simulate HV vaping on 3.2-3.7V. When you start to hit it at high voltage it's just going to end up being burnt toast or plastic save the Smok DC's. Which is maybe why the created the beast.

If you get a few samples sent, I'll take one :0 I'll review it and make you sick pulling fat fat fat fat plumes off it like a vapetrain! I wouldnt ..... so much this time if it ....ed up since its prebeta lol
Oooooh, Look im not the only one that thinks he wants a sample lol
Zerolith is stealing my fire as I write this. I keep seeing gmail pop up with thread updates lol Anyways
 

zer0ith

Ultra Member
ECF Veteran
Verified Member
Mar 28, 2011
2,261
2,061
42
Burlington, Ontario
Sure if they send me four to try out, got me, Tom, Kevin then you :) Unless you want to come join the team :toast:

All this help now I'm gonna have more time to be a nuisance here again :evil:

Whats the address? You don't mind helpers at 3am right :D

If you get a few samples sent, I'll take one :0 I'll review it and make you sick pulling fat fat fat fat plumes off it like a vapetrain! I wouldnt ..... so much this time if it ....ed up since its prebeta lol
Oooooh, Look im not the only one that thinks he wants a sample lol
Zerolith is stealing my fire as I write this. I keep seeing gmail pop up with thread updates lol Anyways

Short and sweet messages work every time. Plus it helps when you show mopar some love at the bar :ohmy: :lol:
 

northofamerica

Super Member
ECF Veteran
Verified Member
Feb 5, 2012
452
207
Saskatoon
Whats the address? You don't mind helpers at 3am right :D
Short and sweet messages work every time. Plus it helps when you show mopar some love at the bar :ohmy: :lol:

hahah Uhhh yeh uhh now i feel uncomfortable... I dunno what to say. What happened the other night? hehe what did I miss? Why do I always have to be stuck in BF SASK lol
All I know is I would do anything that a binge marathon would allow me to forget some of........ for Adam, and maybe Tom cuz hes muh r0b0t! Will it help if I up my orders to twice a week. GAWD lol

Haha just thinking about the kind of help required at 3:00am in the morning :p

Ok.. What did you 2 do the other night! lol
 
Last edited:

therealcmac

Vaping Master
ECF Veteran
Verified Member
Nov 6, 2011
3,012
1,708
47
Vancouver Island, BC Canada
www.youtube.com
Sure if they send me four to try out, got me, Tom, Kevin then you :) Unless you want to come join the team :toast:

All this help now I'm gonna have more time to be a nuisance here again :evil:

I think a Westcoast Beta tester is in order also, we need to figure out how this puppy works around salt water man! Anyways glad to see you will be around more! Oh ya, don't think i jumped ship cause i havent ordered anything in a while, the wife is no longer working and we are broke :( but i will be back asap, i see something orange on the site that i must have ;)
 
Last edited:

Kevofar

Senior Member
ECF Veteran
Sep 24, 2011
190
164
68
Wasaga Beach, On
Whats the address? You don't mind helpers at 3am right :D



Short and sweet messages work every time. Plus it helps when you show mopar some love at the bar :ohmy: :lol:

Yes he likes the love at the bar but I think he likes the love better at work. Gives him more time, and with more time you know how he likes to screw with things and people :)
 

Kevofar

Senior Member
ECF Veteran
Sep 24, 2011
190
164
68
Wasaga Beach, On
Ok so who is this Kevin guy for us that are out of the LOOP??

That would be me. The newest member of the Canvape team. I work in Mopars secret lair helping to get the orders out to you wonderfull customers and organizing things so Mopar can consentrate on more important things like making sure the products that you want and need get to him at the best prices so he can get them to you with the great speed and customer service that you all have come to expect, deserve and demand. lol
 

mopar

Unregistered Supplier
ECF Veteran
May 15, 2011
2,116
1,758
47
Toronto
www.canvape.com
Everyone that has purchased an EVO will be getting a new switch with the upgraded IC free of charge not just people that have had the switch fail. Also all the EVO's in stock/ sold between now and then will also be getting retrofitted with the upgraded switch. If anyone else wants one they are $30.00 :p
 
Status
Not open for further replies.

Users who are viewing this thread