Official OEM 901/801/401 connector order thread
- Thread starter Kewtsquirrel
- Start date
- th_trl_thread_readers 0
- Status
Upon inspection, these 801 type threads are perfect for my use. They are just a hair shorter then the ones I have pulled off of First Union 801 batteries, but that should in no way be an issue. Thanks again---Sun
I received mine today!
Nerf, it's a good thing you packaged them within the envelope. My envelope arrived with a partial return address and a missing corner. I was worried until I saw the Fort Knox of bubble wrap and PVC tape (that stuff resembled duct tape it was so sticky!). You are Da Bomb, man.
Nerf, it's a good thing you packaged them within the envelope. My envelope arrived with a partial return address and a missing corner. I was worried until I saw the Fort Knox of bubble wrap and PVC tape (that stuff resembled duct tape it was so sticky!). You are Da Bomb, man.
People who paid me this weekend got sent out today, I forgot to write down the names, but there were 4 of you, all small orders (5 connectors or less)
For those who just found this thread:
Yes, I still have more, and no, there isn't any minimum order. If you want to order one connector for that mod you've been dreaming of, I'll ship one connector. If you want 100 connectors to start producing the next big thing, I can get those to you as well.
Edit: Connectors are $3 per and $2 shipping for the order, I'll consider discounts for bulk orders, just let me know what you need.
For those who just found this thread:
Yes, I still have more, and no, there isn't any minimum order. If you want to order one connector for that mod you've been dreaming of, I'll ship one connector. If you want 100 connectors to start producing the next big thing, I can get those to you as well.
Edit: Connectors are $3 per and $2 shipping for the order, I'll consider discounts for bulk orders, just let me know what you need.
Last edited:
I got mine and have made 3 new mods already. I got the 801 type. They are great to solder on and they press in their normal tube great.
I made a sort of janty stick.
In this design I left the center hole open. That way I get great air flow and super light draw. It works great with BECI ato's.
I need to name my new mods, either the ulgy stick or steam stick.
I will post picts later this week.
Nerf, thanks again for the connectors. They work great!
I made a sort of janty stick.
In this design I left the center hole open. That way I get great air flow and super light draw. It works great with BECI ato's.
I need to name my new mods, either the ulgy stick or steam stick.
I will post picts later this week.
Nerf, thanks again for the connectors. They work great!
Is this just the metal part you screw the atomizer into? or is there more to it then that?
Yes ride, they are JUST the battery connectors, the brass threading protruding out of the battery on a 901/801. That being said they are PERFECT for non-battery-destroying mods. Thanks again nerf, I can't imagine the amount of work this took, and greatly appreciate it!
Oh and by any chance, are you expecting any 401 connectors? I still would be very interested if you were.
Oh and by any chance, are you expecting any 401 connectors? I still would be very interested if you were.
Sorry i should have left off the Just part...I didn't mean to imply that it was nothing...Thank you Nerf for making this available to all of us! Pulling apart a $15 dollar battery for each attempted mod is not only expensive but difficult! Having parts like this available is what drives innovation with this product! Thank you again Nerf!
Just to give everyone the heads up, I used Nerf's 801 threads on a couple of Mods since I got them and they work great. There is no difference between the DSE801, RN4072, and the BE112 for what ever application or "801" type atomizer you are using. Good going Nerf.-----Sun
Thanks Sun ^_^
I just got in another 200 801 connectors and 150 or so 901 connectors, so if anyone needs them, just holler at me!
I also got in a handful of 801 atomizer threads to make 801->901 adapters with, and prelim tests are great. 901 atomizer threads were ordered but there was some confusion and they weren't sent.
I should probably make a seperate thread to see if theres any interest in adapters, either assembled or the parts to make em.
I just got in another 200 801 connectors and 150 or so 901 connectors, so if anyone needs them, just holler at me!
I also got in a handful of 801 atomizer threads to make 801->901 adapters with, and prelim tests are great. 901 atomizer threads were ordered but there was some confusion and they weren't sent.
I should probably make a seperate thread to see if theres any interest in adapters, either assembled or the parts to make em.
Nerf- I began doing the same in anticipation of my prodigy... what are you using as a tube to stabilize the connectors? For me, a dead 801/M201 battery seems to be doing the trick.
Oh, and I'll +1 on the atomizer connectors!
Oh, and I'll +1 on the atomizer connectors!
Depends on which direction you're going, for a 901->801, a dead 901 battery tube or atomizer tube works great, for 801->901, I'm going to just epoxy the damn thing together and skip the tube altogether.
On another note, I didn't actually bother to inspect my shipment when it came in, the "packing material" that I saw in the 801 connector thread are actually 3/4" wire leads pre-soldered onto them.
So if anyone was holding off on getting connectors because they can't solder the wires to them, problem solved!
For the 901s, i'll pre-solder leads on of any length for $1 per connector, same for the 801 if 3/4" isn't long enough and you don't want an extra solder joint.
Nerf, can I get 5 801 and 5 901?
I'm in NY, tell me how to send you the money and how much time they will take to arrive
I'm urging to mod
I'm in NY, tell me how to send you the money and how much time they will take to arrive
I'm urging to mod
According to my list, the following people still have connectors on hold for them, but are unpaid and unshipped.
Nuck - 10 801, 10 901
Rickb - 5 901
Davidm - 5 801, 5 901
kr0nicle - 5 801, 5 901
Everyone who has PMd me or asked here so far should have had theirs shipped, with the exception of those of you who got ahold of me on the evening of the 2nd, 3rd, 4th, or 5th of July, your orders are going out today.
I still have plenty left, so if anyone else needs them, let me know
Nuck - 10 801, 10 901
Rickb - 5 901
Davidm - 5 801, 5 901
kr0nicle - 5 801, 5 901
Everyone who has PMd me or asked here so far should have had theirs shipped, with the exception of those of you who got ahold of me on the evening of the 2nd, 3rd, 4th, or 5th of July, your orders are going out today.
I still have plenty left, so if anyone else needs them, let me know
I tried twice to click on your name above your avatar and send you a PM but my outbox doesn't have any sent messages in it.
Can you let me know if it worked or not. Sorry, forum idiot.
Thanks ~ P
Can you let me know if it worked or not. Sorry, forum idiot.
Thanks ~ P
- Status
Similar threads
- Locked
