I'm so thankful not to be OCD. Yes I am! Yes the plasma tank fits perfectly.
Thanks for the advice. I'm going to Lowe's so I'll pick up some sandpaper.
Official ProVari 3 Thread - P3 *PART 2*
- Thread starter MonsterKenny
- Start date
- th_trl_thread_readers 0
- Status
I'm so thankful not to be OCD. Yes I am! Yes the plasma tank fits perfectly.
Thanks for the advice. I'm going to Lowe's so I'll pick up some sandpaper.
Make sure it is fine. The less aggressive the better. 320 might be OK too. You want to just knock down the shine without removing the finish. Go light when you go to sand it.
I'm not quite at his level of OCD'ism. Thankfully! Even I have my limits. Yes I do!
Close enough. Need a wipe?
I'll pass, but thanks ever so for offering!
I thought the odds against that were rather steep. Thanks, LB!Not the only one ...
And then there were two. [emoji41]
This was posted in the Saloon and I thought some in here might get a kick out of this
A ProVari hand made wood box mod.
This was posted in the Saloon and I thought some in here might get a kick out of this
A ProVari hand made wood box mod.
He is fast.....
This was posted in the Saloon and I thought some in here might get a kick out of this
A ProVari hand made wood box mod.
That was fascinating. And I watched the entire thing. Of course the entire time I was thinking.......WHY? Oh and all that work and it's not even a P3 Box Mod! That's a lot of work to have something do exactly what it did in its metal tube. But hey, you've got to give the guy credit for doing what appeared to be a very nice job!
And why does he go through all that?This was posted in the Saloon and I thought some in here might get a kick out of this
Because he can.
I know there are some Kayfun Lite fans here in the P3 thread ... I found this nice blog by TheKiwi about Kayfun replacement orings, and screws ... seeing as I am big on preparing for a worst case scenario regarding vaping, I figure, why not have lots of spare parts for my authentic Kayfuns.
Kayfun Replacement O-rings and Screws! | E-Cigarette Forum
I purchased the following ...
The very tiny screws for capturing the leads on the deck, critical dimension: M1.6 x 0.35mm
Fill hole screws: M2.5 x 0.45 x 5
Fill screw orings (the very tiny ones): 2mm inner diameter x 1mm wide
Chimney orings (sits in the top cap, where the top chimney section slides through): 5mm inner diameter x 1.5 mm wide
Base and other section orings: 18mm inner diameter x 1mm wide
I will confirm, these items all work perfect on the Kayfun Lite v2+
Kayfun Replacement O-rings and Screws! | E-Cigarette Forum
I purchased the following ...
The very tiny screws for capturing the leads on the deck, critical dimension: M1.6 x 0.35mm
Fill hole screws: M2.5 x 0.45 x 5
Fill screw orings (the very tiny ones): 2mm inner diameter x 1mm wide
Chimney orings (sits in the top cap, where the top chimney section slides through): 5mm inner diameter x 1.5 mm wide
Base and other section orings: 18mm inner diameter x 1mm wide
I will confirm, these items all work perfect on the Kayfun Lite v2+
I wish Provape would make a little Box Mod
You and I'm sure others. But not me. Nope. I don't need or really want a box. When it's not being used, it mostly sits in my pants pocket. A tube takes up less space and feels perfect in my hands. But I'm sure if enough people want one, Provape will make one. Maybe.
Happy Friday everyone!
Tim, I hope you're feeling better. Yes I do!
Tim, I hope you're feeling better. Yes I do!
- Status
Similar threads
- Locked
